Revisted Eth1 problem
david walcroft
d_j_w46 at bigpond.net.au
Wed Sep 19 23:59:19 UTC 2007
Ed Greshko wrote:
> david walcroft wrote:
>
>
>> I changed the Eth1 address to 192.168.0.1
>> Subnet default to 255.255.255.255
>>
>
> Most likely it should be 255.255.255.0
>
>
>> default Gateway to 192.168.0.0
>>
>
> Probably should not be set at all for that interface. Post the output of
> "netstat -rn".
>
>
>> Would this be correct
>> I'm using a crossover cable.
>>
>
> If you are using a crossover cable on eth1 then you don't need DHCP. Better
> to go with static network settings.
>
>
>> I see that there's a DHCP upgrade in Updates,I hope this can help with
>> this problem.
>>
>
> Just forget about using DHCP on eth1. Life will be easier.
>
>
>> I have changed my ethernet card on Eth1.
>> My Iptables have not been changed for a long time,how would I test it
>> for any problems.
>>
>
> My netstat -rn
[david at reddwarf ~]$ netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt
Iface
121.208.32.0 0.0.0.0 255.255.248.0 U 0 0 0
eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0
eth1
0.0.0.0 121.208.32.1 0.0.0.0 UG 0 0 0
eth0
[david at reddwarf ~]$
Thanks david
More information about the users
mailing list