USB MicroSD card reader fails to mount

[Mikkel L. Ellertson]

Max Pyziur wrote:
> 
> 
> Greetings,
> 
> This evening when I installed my USB MicroSD reader into a USB port it
> failed to be mounted.
> 
> My flash drives mount properly.
> 
> Looking at the log files I see:
> Apr 21 23:12:54 brill kernel: usb 1-2: new high speed USB device using
> ehci_hcd and address 7
> Apr 21 23:12:54 brill kernel: usb 1-2: configuration #1 chosen from 1
> choice
> Apr 21 23:12:54 brill kernel: scsi11 : SCSI emulation for USB Mass
> Storage devices
> Apr 21 23:12:54 brill kernel: usb 1-2: New USB device found,
> idVendor=090c, idProduct=6200
> Apr 21 23:12:54 brill kernel: usb 1-2: New USB device strings: Mfr=1,
> Product=2, SerialNumber=3
> Apr 21 23:12:54 brill kernel: usb 1-2: Product: Generic USB2.0 card
> Apr 21 23:12:54 brill kernel: usb 1-2: Manufacturer: Silicon Motion, Inc.
> Apr 21 23:12:54 brill kernel: usb 1-2: SerialNumber: 12345678901234567890
> Apr 21 23:12:59 brill kernel: scsi 11:0:0:0: Direct-Access     Generic
> USB  SD Reader   1.00 PQ: 0 ANSI: 0 CCS
> Apr 21 23:12:59 brill kernel: sd 11:0:0:0: [sdc] Attached SCSI removable
> disk
> Apr 21 23:12:59 brill kernel: sd 11:0:0:0: Attached scsi generic sg3 type 0
> 
> It stops there.
> 
<--------------------------[ snip ]------------------->
> 
> Any suggestions on how to mount this card?
> 
> Much thanks.
> 
> Max Pyziur
> pyz at brama.com
> 
The differences I see is that it looks like the usb_storage module
is already mounted, and the card is not being seen. Are you sure the
mini-SD card is properly seated in the reader?

Mikkel?\
-- 

  Do not meddle in the affairs of dragons,
for thou art crunchy and taste good with Ketchup!

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 197 bytes
Desc: OpenPGP digital signature
Url : http://lists.fedoraproject.org/pipermail/users/attachments/20090426/206fcbe8/attachment-0001.bin