HighPoint Rocket Raid Module compile FC11-failure

[Bob Hartung]

Ed
   rr232x.ko may be built. It is over 1MB in size and modprobe does not 
believe it is a module and dies when modprobe rr232x.ko is run.

   Prior to this I copied rr232x.ko to /lib/modules/.......

   There is also a complaint about a conf file.

   I'll keep looking.


Bob
Ed Greshko wrote:
> Bob Hartung wrote:
>> Hi all,
>>   I have a stock FC11 install with all updates applied.  Dev tools is
>> installed.  I am now trying to add a HighPoint Rocket rr2320 RAID
>> PCI-e RAID controller.
>>
>>   I have unpacked the source files into a subdirectory of user's home
>> directory. Upon navigating to this directory the follow is the
>> response to 'make'.
>>
>> [root at localhost linux]# make ARCH=x86_64 KERNEL_VER=2.6
>> make[1]: Entering directory `/usr/src/kernels/2.6.30.8-64.fc11.x86_64'
>>   CC [M]
>> /home/robert/Download/rr232x-linux-src-v1.10/product/rr232x/linux/.build/os_linux.o
>>
>>   CC [M]
>> /home/robert/Download/rr232x-linux-src-v1.10/product/rr232x/linux/.build/osm_linux.o
>>
>>   CC [M]
>> /home/robert/Download/rr232x-linux-src-v1.10/product/rr232x/linux/.build/div64.o
>>
>>   CC [M]
>> /home/robert/Download/rr232x-linux-src-v1.10/product/rr232x/linux/.build/hptinfo.o
>>
>>   CC [M]
>> /home/robert/Download/rr232x-linux-src-v1.10/product/rr232x/linux/.build/config.o
>>
>>   LD [M]
>> /home/robert/Download/rr232x-linux-src-v1.10/product/rr232x/linux/.build/rr232x.o
>>
>>   Building modules, stage 2.
>>   MODPOST 1 modules
>> WARNING: could not find
>> /home/robert/Download/rr232x-linux-src-v1.10/product/rr232x/linux/.build/.him_rr232x.o.cmd
>> for
>> /home/robert/Download/rr232x-linux-src-v1.10/product/rr232x/linux/.build/him_rr232x.o
>>
>>   LD [M]
>> /home/robert/Download/rr232x-linux-src-v1.10/product/rr232x/linux/.build/rr232x.ko
>>
>> make[1]: Leaving directory `/usr/src/kernels/2.6.30.8-64.fc11.x86_64'
>>
>> I am not a developer.  The file .him_rr232x.o exists.  I don't
>> understand the .cmd attached.
>>
>> Any and all help appreciated.  I have had no success googling this as
>> I am led back to High Point who provide drivers only for FC8 and earlier.
>>
> Are you certain you are reading this correctly?
> 
> For fun I downloaded and compiled with a similar "warning".
> 
> WARNING: could not find
> /home/egreshko/src/rr232x-linux-src-v1.10/product/rr232x/linux/.build/.him_rr232x.o.cmd
> for
> /home/egreshko/src/rr232x-linux-src-v1.10/product/rr232x/linux/.build/him_rr232x.o
> 
> and....
> 
> [egreshko at f11 linux]$ ls
> /home/egreshko/src/rr232x-linux-src-v1.10/product/rr232x/linux/.build/.him_rr232x.o.cmd
> ls: cannot access
> /home/egreshko/src/rr232x-linux-src-v1.10/product/rr232x/linux/.build/.him_rr232x.o.cmd:
> No such file or directory
> 
> But, in any case, it seems to be only a warning since the rr232x.ko is
> built.
> 
> 
>