TVTime loses focus after installing F13

[Michael Miles]

William Case wrote:
> On Thu, 2010-08-26 at 12:30 -0700, Michael Miles wrote:
>    
>> William Case wrote:
>>      
>>> Hi;
>>>
>>> I have a Hauppauge WinTv-HVR 1800 tuner with an analog Cable TV (NTSC -
>>> Canada).  In F12 I received a near perfect video picture from my cable
>>> TV.  In F13, the picture is black and white with various degrees of
>>> interference lines depending on the tv channel.
>>>
>>> I have played with (used) TVTime quite a bit in the last 3 or 4 years so
>>> I am familiar with all the menu settings and the configuration file.  No
>>> matter what I try, I can't get the proper reception back.
>>>
>>> I still have no analog sound for this tuner, but I see that as a
>>> separate Alsa problem.
>>>
>>> Any suggestions as to what I might be overlooking or might have
>>> mis-configured with the video?
>>>
>>>        
>> In the channel management section try and change the NTSC cable mode and
>> see if that helps
>>
>>
>> Michael
>>      
> I tried that; nothing improves.
>
>    
If the manual fine tuning does not work then I don't know as I have had 
no problems with tvtime at all with F12.
I have not switched to F13 yet because there just seems to be too many 
problems and I will wait for F14 as the video problems of F13 should be 
fixed by then,.



  Try XDTV and see if you can get a picture clear. It's a bit cumbersome 
but works and it will record

I had to set the tv norm to ntsc m to get it to work

Just to see if it is a problem with tvtime and F13