Cannot get make gconfig to run on my system

Barton Landrum blandrum2 at gmail.com
Thu Jul 1 18:02:40 UTC 2010


tmp/linux-2.6.34 is the directory containing my kernel code.

I ran the sudo yum command as you suggested. I then ran the make xconfig
command from my tmp/linux-2.6.34 folder and got this:

[root at blandrum linux-2.6.34]# make xconfig
  CHECK   qt
*
* Unable to find the QT3 installation. Please make sure that
* the QT3 development package is correctly installed and
* either install pkg-config or set the QTDIR environment
* variable to the correct location.
*
make[1]: *** No rule to make target `scripts/kconfig/.tmp_qtcheck', needed
by `scripts/kconfig/qconf.o'.  Stop.
make: *** [xconfig] Error 2
[root at blandrum linux-2.6.34]#


biggerb

On Wed, Jun 30, 2010 at 10:16 PM, JD <jd1008 at gmail.com> wrote:

>  On 06/30/2010 09:50 PM, Barton Landrum wrote:
>
> I am running it out of a tmp subfolder
>
> /tmp/linux-2.6.34/
>
> On Wed, Jun 30, 2010 at 9:30 PM, JD <jd1008 at gmail.com> wrote:
>
>>   On 06/30/2010 09:10 PM, Barton Landrum wrote:
>> > I enter:
>> >
>> > [root at blandrum linux-2.6.34]# make gconfig
>> >
>> > and I get the following:
>> >
>> > *
>> > * Unable to find the GTK+ installation. Please make sure that
>> > * the GTK+ 2.0 development package is correctly installed...
>> > * You need gtk+-2.0, glib-2.0 and libglade-2.0.
>> > *
>> > make[1]: *** No rule to make target `scripts/kconfig/.tmp_gtkcheck',
>> > needed by `scripts/kconfig/gconf.o'.  Stop.
>> > make: *** [gconfig] Error 2
>> >
>> > [root at blandrum linux-2.6.34]#
>> >
>> > Thanks in advance
>> >
>> > biggerb
>>  I am running F13 with latest updates as of 30 minutes ago.
>> I have these packages installed:
>> gtk+-1.2.10-70.fc13.i686
>> gtk+-devel-1.2.10-70.fc13.i686
>> gtk2-2.20.1-1.fc13.i686
>> gtk2-devel-2.20.1-1.fc13.i686
>> glib-1.2.10-33.fc12.i686
>> glib-devel-1.2.10-33.fc12.i686
>> glib2-2.24.1-1.fc13.i686
>> glib2-devel-2.24.1-1.fc13.i686
>> libglade-0.17-24.fc12.i686
>> libglade-devel-0.17-24.fc12.i686
>> libglade2-2.6.4-3.fc12.i686
>> libglade2-devel-2.6.4-3.fc12.i686
>>
>> So, the question is: in which directory are you invoking "make gconfig"?
>>
>> JD
>> --
>> users mailing list
>> users at lists.fedoraproject.org
>> To unsubscribe or change subscription options:
>> https://admin.fedoraproject.org/mailman/listinfo/users
>> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
>>
>
>
> sudo yum install gtk2 gtk2-devel glib2 glib2-devel libglade2
> libglade2-devel
>
> So, what is in /tmp/inux-2.6.34/ ?
> Is the kernel source there?
> If yes, Why are you running make gconfig?
> It wont work - and it does not work on my
> fully updated system with all the needed packages.
> Just run make xconfig and it works!
>
> Using make gconfig, I get a huge pile of warnings and dies with an error;
> so why  bother with gconfig??
> $ make gconfig
>   HOSTCC  scripts/basic/fixdep
>   HOSTCC  scripts/basic/docproc
>   HOSTCC  scripts/basic/hash
>   HOSTCC  scripts/kconfig/conf.o
>   HOSTCC  scripts/kconfig/gconf.o
> In file included from /usr/include/gtk-2.0/gtk/gtk.h:233,
>                  from /usr/include/libglade-2.0/glade/glade-xml.h:26,
>                  from /usr/include/libglade-2.0/glade/glade.h:28,
>                  from scripts/kconfig/gconf.c:16:
> /usr/include/gtk-2.0/gtk/gtkitemfactory.h:47: warning: function declaration
> isn’t a prototype
> scripts/kconfig/gconf.c:80: warning: no previous prototype for
> ‘dbg_print_stype’
> scripts/kconfig/gconf.c:108: warning: no previous prototype for
> ‘dbg_print_flags’
> scripts/kconfig/gconf.c:141: warning: no previous prototype for
> ‘dbg_print_ptype’
> scripts/kconfig/gconf.c:168: warning: no previous prototype for
> ‘replace_button_icon’
> scripts/kconfig/gconf.c:187: warning: no previous prototype for
> ‘init_main_window’
> scripts/kconfig/gconf.c:276: warning: no previous prototype for
> ‘init_tree_model’
> scripts/kconfig/gconf.c:306: warning: no previous prototype for
> ‘init_left_tree’
> scripts/kconfig/gconf.c:350: warning: no previous prototype for
> ‘init_right_tree’
> scripts/kconfig/gconf.c:503: warning: no previous prototype for
> ‘on_window1_delete_event’
> scripts/kconfig/gconf.c:548: warning: no previous prototype for
> ‘on_window1_destroy’
> scripts/kconfig/gconf.c:555: warning: no previous prototype for
> ‘on_window1_size_request’
> scripts/kconfig/gconf.c:591: warning: no previous prototype for
> ‘on_load1_activate’
> scripts/kconfig/gconf.c:632: warning: no previous prototype for
> ‘on_save_as1_activate’
> scripts/kconfig/gconf.c:652: warning: no previous prototype for
> ‘on_quit1_activate’
> scripts/kconfig/gconf.c:659: warning: no previous prototype for
> ‘on_show_name1_activate’
> scripts/kconfig/gconf.c:670: warning: no previous prototype for
> ‘on_show_range1_activate’
> scripts/kconfig/gconf.c:688: warning: no previous prototype for
> ‘on_show_data1_activate’
> scripts/kconfig/gconf.c:700: warning: no previous prototype for
> ‘on_show_all_options1_activate’
> scripts/kconfig/gconf.c:710: warning: no previous prototype for
> ‘on_show_debug_info1_activate’
> scripts/kconfig/gconf.c:717: warning: no previous prototype for
> ‘on_introduction1_activate’
> scripts/kconfig/gconf.c:749: warning: no previous prototype for
> ‘on_about1_activate’
> scripts/kconfig/gconf.c:767: warning: no previous prototype for
> ‘on_license1_activate’
> scripts/kconfig/gconf.c:786: warning: no previous prototype for
> ‘on_back_clicked’
> scripts/kconfig/gconf.c:801: warning: no previous prototype for
> ‘on_load_clicked’
> scripts/kconfig/gconf.c:807: warning: no previous prototype for
> ‘on_single_clicked’
> scripts/kconfig/gconf.c:817: warning: no previous prototype for
> ‘on_split_clicked’
> scripts/kconfig/gconf.c:833: warning: no previous prototype for
> ‘on_full_clicked’
> scripts/kconfig/gconf.c:845: warning: no previous prototype for
> ‘on_collapse_clicked’
> scripts/kconfig/gconf.c:851: warning: no previous prototype for
> ‘on_expand_clicked’
> scripts/kconfig/gconf.c:991: warning: no previous prototype for
> ‘on_treeview2_button_press_event’
> scripts/kconfig/gconf.c:1048: warning: no previous prototype for
> ‘on_treeview2_key_press_event’
> scripts/kconfig/gconf.c:1093: warning: no previous prototype for
> ‘on_treeview2_cursor_changed’
> scripts/kconfig/gconf.c:1109: warning: no previous prototype for
> ‘on_treeview1_button_press_event’
> scripts/kconfig/gconf.c:1321: warning: no previous prototype for
> ‘gtktree_iter_find_node’
> scripts/kconfig/gconf.c:1523: warning: no previous prototype for
> ‘fixup_rootmenu’
> scripts/kconfig/images.c:6: warning: ‘xpm_load’ defined but not used
> scripts/kconfig/images.c:36: warning: ‘xpm_save’ defined but not used
> scripts/kconfig/images.c:66: warning: ‘xpm_back’ defined but not used
> scripts/kconfig/images.c:175: warning: ‘xpm_symbol_no’ defined but not used
> scripts/kconfig/images.c:192: warning: ‘xpm_symbol_mod’ defined but not
> used
> scripts/kconfig/images.c:209: warning: ‘xpm_symbol_yes’ defined but not
> used
> scripts/kconfig/images.c:226: warning: ‘xpm_choice_no’ defined but not used
> scripts/kconfig/images.c:243: warning: ‘xpm_choice_yes’ defined but not
> used
> scripts/kconfig/images.c:277: warning: ‘xpm_menu_inv’ defined but not used
> scripts/kconfig/images.c:294: warning: ‘xpm_menuback’ defined but not used
> scripts/kconfig/gconf.c:944: warning: ‘renderer_toggled’ defined but not
> used
>   HOSTCC  scripts/kconfig/kconfig_load.o
>   HOSTCC  scripts/kconfig/kxgettext.o
>   HOSTCC  scripts/kconfig/zconf.tab.o
>   HOSTLD  scripts/kconfig/gconf
> /usr/bin/ld: scripts/kconfig/kconfig_load.o: undefined reference to symbol
> 'dlopen@@GLIBC_2.1'
> /usr/bin/ld: note: 'dlopen@@GLIBC_2.1' is defined in DSO /lib/libdl.so.2
> so try adding it to the linker command line
> /lib/libdl.so.2: could not read symbols: Invalid operation
> collect2: ld returned 1 exit status
> make[1]: *** [scripts/kconfig/gconf] Error 1
> make: *** [gconfig] Error 2
>
>
>
> --
> users mailing list
> users at lists.fedoraproject.org
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.fedoraproject.org/pipermail/users/attachments/20100701/efbd21b5/attachment.html 


More information about the users mailing list