how not to initialize HD
Paul Cartwright
ale at pcartwright.com
Sat Jul 31 15:08:25 UTC 2010
On Sat July 31 2010, JB wrote:
> # <------------------ not the root prompt !
> - give us the output (please do not cut/edit it; do not tell us that it
> said something ...; just copy and paste it for us, whatever it is !) #
> fdisk -l
> # fdisk -l /dev/sda
> # cfdisk -Ps
> - can you see a disply ?
> # cfdisk
> If so, just move cursor and hit Quit in menu
> If not, give copy the answer for us as above (even if only your bash
> prompts. - output of your /etc/fstab
> # cat /etc/fstab
oh my..
# fdisk -l
Disk /dev/sda: 100.0 GB, 100030242816 bytes
255 heads, 63 sectors/track, 12161 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xa8a8a8a8
Device Boot Start End Blocks Id System
/dev/sda1 * 1 4462 35840983+ 7 HPFS/NTFS
/dev/sda2 4463 4717 2048287+ e W95 FAT16 (LBA)
/dev/sda3 4718 12162 59793409 5 Extended
Partition 3 does not end on cylinder boundary.
/dev/sda5 4718 5961 9989120 83 Linux
/dev/sda6 5962 8094 17133291 83 Linux
/dev/sda7 11919 12162 1951744 82 Linux swap / Solaris
/dev/sda8 8095 11918 30716248+ c W95 FAT32 (LBA)
# cfdisk -Ps
FATAL ERROR: Bad primary partition 2: Partition ends in the final partial
cylinder
cat /etc/fstab
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda5 during installation
UUID=c2b10e6e-41fc-4fbd-bb7c-1a1974eaafd3 / ext4
errors=remount-ro 0 1
# /home was on /dev/sda6 during installation
UUID=40436719-5fde-4f48-93f2-49457f0e1264 /home ext4 defaults
0 2
# swap was on /dev/sda7 during installation
UUID=03344fb4-f605-4675-92b9-090a48e88d0b none swap sw
0 0
--
Paul Cartwright
Registered Linux user # 367800
Registered Ubuntu User #12459
http://usdebtclock.org/
More information about the users
mailing list