how to set screen resolution for HP6710b on Fedora 13

L yuanlux at gmail.com
Wed Jun 16 03:27:39 UTC 2010


On Wed, Jun 16, 2010 at 10:32 AM, L <yuanlux at gmail.com> wrote:
> On Wed, Jun 16, 2010 at 8:07 AM, Sam Sharpe <lists.redhat at samsharpe.net> wrote:
>> On 15 June 2010 22:54, L <yuanlux at gmail.com> wrote:
>>> thanks, I will try the manual setup later. Some suggested
>>>
>>> xf86-video-intel Driver from
>>> http://www.phoronix.com/scan.php?page=news_item&px=NjYwOQ may be a
>>> fix. I tried to compile it. After ./configure. stopped at ./make.
>>
>> Honestly, I can't see that helping. I have a 6910p which is newer than
>> your model and it works fine with the F13 intel driver, so I honestly
>> can't see your older model needing a newer driver.
>>
>> Just out of interest, what does xrandr say about your screen? Here's
>> what mine says about detected resolutions:
>>
>> [sam at samlap ~ ]$ xrandr
>> Screen 0: minimum 320 x 200, current 1440 x 900, maximum 8192 x 8192
>> LVDS1 connected 1440x900+0+0 (normal left inverted right x axis y
>> axis) 303mm x 189mm
>>   1440x900       60.0*+
>>   1024x768       60.0
>>   800x600        60.3     56.2
>>   640x480        59.9
>> VGA1 disconnected (normal left inverted right x axis y axis)
>> DVI1 disconnected (normal left inverted right x axis y axis)
>> TV1 unknown connection (normal left inverted right x axis y axis)
>>   1024x768       60.0
>>   800x600        60.3
>>   640x480        59.9
>
> here is out put from xrandr
>
this is the output of xrandr at console.

Screen 0: minimum 320 x 200, current 1280 x 800, maximum 8192 x 8192
LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y
axis) 331mm x 207mm
   1280x800       60.0*+
   1024x768       60.0
   800x600        60.3     56.2
   640x480        59.9
VGA1 disconnected (normal left inverted right x axis y axis)
TV1 unknown connection (normal left inverted right x axis y axis)
   1024x768       60.0
   800x600        60.3
   640x480        59.9


>
>  SZ:    Pixels          Physical       Refresh
>  0    800 x 600    ( 271mm x 203mm )   60
>  1    160 x 120    (  54mm x  41mm )   60
>  2    320 x 240    ( 108mm x  81mm )   60
>  3    640 x 480    ( 217mm x 163mm )   60
>  4   1024 x 768    ( 347mm x 260mm )   60
> *5   1280 x 1024   ( 433mm x 347mm )  *60
> Current rotation - normal
> Current reflection - none
> Rotations possible - normal
> Reflections possible - none
>
> what does this tell me?
>
>>
>> Here's what my xorg.conf says - it's not particularly interesting:
>>
>> [sam at samlap ~ ]$ cat /etc/X11/xorg.conf
>> # Xorg configuration created by system-config-display
>>
>> Section "ServerLayout"
>>        Identifier     "single head configuration"
>>        Screen      0  "Screen0" 0 0
>>        InputDevice    "Keyboard0" "CoreKeyboard"
>> EndSection
>>
>> Section "InputDevice"
>>
>> # keyboard added by system-config-display
>>        Identifier  "Keyboard0"
>>        Driver      "kbd"
>>        Option      "XkbModel" "pc105"
>>        Option      "XkbLayout" "gb"
>> EndSection
>>
>> Section "Monitor"
>>        Identifier   "Monitor1"
>>        VendorName   "Monitor Vendor"
>>        ModelName    "LCD Panel 1360x768"
>>        HorizSync    31.5 - 48.0
>>        VertRefresh  56.0 - 65.0
>>        Option      "dpms"
>> EndSection
>>
>> Section "Device"
>>        Identifier  "Videocard0"
>>        Driver      "intel"
>> EndSection
>>
>> Section "Screen"
>>        Identifier "Screen0"
>>        Device     "Videocard0"
>>        DefaultDepth     24
>>        SubSection "Display"
>>                Viewport   0 0
>>                Depth     24
>>        EndSubSection
>> EndSection
>>
>>
>> --
>> Sam
>> --
>> users mailing list
>> users at lists.fedoraproject.org
>> To unsubscribe or change subscription options:
>> https://admin.fedoraproject.org/mailman/listinfo/users
>> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
>>
>
>
>
> --
> http://etvillage.blogspot.com/
>



-- 
http://etvillage.blogspot.com/


More information about the users mailing list