Configuration of HP L2045 monitor

[Chris Jones]

On 01/01/2011 07:10 PM, Bruno Wolff III wrote:
> On Sat, Jan 01, 2011 at 18:52:30 +0000,
>    Chris Jones<linux at stow-jones.co.uk>  wrote:
>> Thanks for that. I have included the last section of the log here:-
>> [109697.603] (II) RADEON(0): EDID for output DIN
>> [109697.617] (II) RADEON(0): EDID for output DVI-1
>> [109999.651] (II) RADEON(0): EDID for output DVI-0
>> [109999.651] (II) RADEON(0): Printing probed modes for output DVI-0
>> [109999.651] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048
>> 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>> [109999.651] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840
>> 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
>> [109999.651] (II) RADEON(0): Modeline "800x600"x56.2   36.00  800 824
>> 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
>> [109999.651] (II) RADEON(0): Modeline "848x480"x60.0   33.75  848 864
>> 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz)
>> [109999.651] (II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656
>> 752 800  480 489 492 525 -hsync -vsync (31.5 kHz)
> The monitor or video card are seem to be limited to less than 1600x1600 since
> no mode line is generated for that. In a previous message the monitor-edid
> output suggested that your monitor does have EDID support.
>
> I looked up specs on the monitor and it looks like the natural resolution of
> the monitor is 1680x1050. It may be that the monitor doesn't really support
> 1600x1200 (even if it can be driven out of spec) and that the video card
> doesn't support 1680x1050.
> .
>
I have now resolved my issue. I achieved it by downloading the ATI 
drivers for my Radeo 2600 card and everything is working fine now.

Thanks to everyone for their help.

-- 
Chris Jones