Sound input on Fedora 15
Michael Eager
eager at eagercon.com
Wed Jun 1 22:17:48 UTC 2011
Sound output through my motherboard's Intel HDA ACL888 works OK.
Sound input does not work.
Alsa lists the ACL888 as well as a video capture card.
Pulseaudio (pacmd list-sources) shows the card and says that it only has
internal audio monitor, not hardware input.
Any suggestions on how to fix this?
# arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 2: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Bt878 [Brooktree Bt878], device 0: Bt87x Digital [Bt87x Digital]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: Bt878 [Brooktree Bt878], device 1: Bt87x Analog [Bt87x Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
# pacmd
list-sources
2 source(s) available.
index: 0
name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: RUNNING
suspend cause:
priority: 1950
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 344 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 20.00 ms; range is 0.50 .. 1999.82 ms
monitor_of: 0
card: 0 <alsa_card.pci-0000_00_1b.0>
module: 4
properties:
device.description = "Monitor of Internal Audio Analog Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xf9ff8000 irq 310"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "293e"
device.product.name = "82801I (ICH9 Family) HD Audio Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
--
Michael Eager eager at eagercon.com
1960 Park Blvd., Palo Alto, CA 94306 650-325-8077
More information about the users
mailing list