How to change screen resolution

[Triadi Krisnawan]

Oh you are right..
My bad :-)
Thanks a lot guys.. to quick to read.. :-p
I'll try it once I have the access on the machine later on..
 
I'll keep updating if anything..
 
Triadi
 


Date: Sat, 5 Mar 2011 20:05:28 -0500
From: marklapier at aol.com
To: users at lists.fedoraproject.org
Subject: Re: How to change screen resolution


On 03/05/2011 04:35 PM, Triadi Krisnawan wrote: 


Hi Doc,
 
Thanks for the info.
I think I could take off the first posibility because it was working fine before with higher resolution 4 weeks ago. But after I rebooted the machine went to lower resolution (1024x768) and started flickering. So the KVM might not be the problem.
 
I will try to use the gft command. I am assuming that this command can run in any terminal right?
And also which are the two lines to be copy?
Are they : 
1280x1024 @ 60.00 Hz (GTF) hsync: 63.60 kHz; pclk: 108.88 MHz
Modeline "1280x1024_60.00" 108.88 1280 1360 1496 1712 1024 1025

Or 
Modeline "1280x1024_60.00" 108.88 1280 1360 1496 1712 1024 1025
1028 1060 -HSync +Vsync
 
Thanks Doc,
Triadi


 

> Triadi,
> 
> Two possibilities.
> 
> (1) Your VGA splitter device might limit its output resolution to
> 1024x768. That's common with VGA-type KVMs.
> 
> (2) Your Modeline statement looks incomplete. Try using the gtf utility:
> $ gtf 1280 1024 60
> You'll get an output line that looks like this:
> # 1280x1024 @ 60.00 Hz (GTF) hsync: 63.60 kHz; pclk: 108.88 MHz
> Modeline "1280x1024_60.00" 108.88 1280 1360 1496 1712 1024 1025
> 1028 1060 -HSync +Vsync
> 
> Try copying and pasting those two lines into your xorg.conf file. I had
> to replace the underscore '_' character in the double-quotes string with
> a space ' ' to get it to work in my system.
> 
> Hope this helps.
> 
> --Doc Savage
> Fairview Heights, IL
> 
> 
> -- 
> users mailing list
> users at lists.fedoraproject.org
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines

= Hey Triadi,

The second line is wrapped in the output above.

Try stretching your terminal window wider first, then run the command.  You will only get two lines in the terminal.  Use them both, with the edit suggested, and that might work.

-- 
   °v°
  /(_)\
   ^ ^  Mark LaPierre
Registerd Linux user No #267004
www.counter.li.org
****
In a free world without fences, who needs gates.
**
Help Microsoft stamp out piracy - give Linux to a friend today.
**
To mess up a Linux box, you need to work at it.
To mess up an MS Windows box, you just need to *look* at it.
**
learn linux:
'Rute User's Tutorial and Exposition' http://rute.2038bug.com/index.html
'The Linux Documentation Project' http://www.tldp.org/
'LDP HOWTO-index' http://www.tldp.org/HOWTO/HOWTO-INDEX/index.html
'HowtoForge' http://howtoforge.com/
****
--
Signature shamelessly copied from:
Jatin Khatri & geleem

-- users mailing list users at lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.fedoraproject.org/pipermail/users/attachments/20110306/53cafbb4/attachment.html