Cannot bring eth1 up

[Aaron Gray]

On 10 May 2011 21:39, Aaron Konstam <akonstam at sbcglobal.net> wrote:
> On Tue, 2011-05-10 at 18:13 +0100, Aaron Gray wrote:
>> I cannot seem to bring eth1 up.
>>
>> # ifup eth1
>> Error: Connection activation failed: Device not managed by
>> NetworkManager or unavailable
>>
>> # cat ifcfg-eth1
>> GATEWAY0=192.168.0.1
>> IPV6INIT=yes
>> BROADCAST="192.168.1.255"
>> DNS1=8.8.8.8
>> UUID=9c92fad9-6ecb-3e6c-eb4d-8a47c6f50c04
>> BOOTPROTO=none
>> NAME="System eth1"
>> PREFIX0=24
>> MACADDR="00:26:18:E4:99:77"
>> NM_CONTROLLED=yes
>> IPV6_FAILURE_FATAL=no
>> TYPE=Ethernet
>> DEVICE=eth1
>> IPADDR0=192.168.1.1
>> IPV6_AUTOCONF=yes
>> MTU=""
>> NETMASK="255.255.255.0"
>> IPV6_DEFROUTE=yes
>> DEFROUTE=yes
>> IPADDR="192.168.1.1"
>> NETWORK=""
>> IPV4_FAILURE_FATAL=yes
>> ONBOOT=no
>> HWADDR=00:26:18:E4:99:77
>> IPV6_PEERDNS=yes
>> IPV6_PEERROUTES=yes
>>
>> Many thanks in advance,
>>
>> Aaron
> Ii aggree with Rick. Compare my ifcfg-eth1 to yours.
>
> DEVICE="eth1"
> ESSID="2WIRE924"
> HWADDR="00:16:6F:40:E3:59"
> NM_CONTROLLED="yes"
> ONBOOT="no"
>

Right. Its what a newly installed and configured Fedora 14 has generated though.

Aaron