F15: fail2ban not in iptables status

[sguazt]

Hi,

I have fail2ban up and running on my Fedora 15.
root      1026  0.0  0.3 189936  6724 ?        S    13:52   0:00
/usr/bin/python /usr/bin/fail2ban-server -b -s
/var/run/fail2ban/fail2ban.sock -x

I use it for banning IPs that try to connect to my host via SSH.
Here's below is a snip of jail.local:
--- [jail.local] ---
[ssh-iptables]

enabled  = true
filter   = sshd
action   = iptables[name=SSH, port=ssh, protocol=tcp]
           sendmail-whois[name=SSH, dest=sguazt, sender=fail2ban at localhost]
logpath  = /var/log/secure
maxretry = 3
--- [/jail.local] ---

However I can't see it in the iptables status (like I could until Fedora 14).
So I think it is not working properly.

Here's my iptables status:

--- [iptables status] ---
Table: nat
Chain PREROUTING (policy ACCEPT)
num  target     prot opt source               destination

Chain INPUT (policy ACCEPT)
num  target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
num  target     prot opt source               destination

Chain POSTROUTING (policy ACCEPT)
num  target     prot opt source               destination
1    MASQUERADE  tcp  --  192.168.122.0/24    !192.168.122.0/24
masq ports: 1024-65535
2    MASQUERADE  udp  --  192.168.122.0/24    !192.168.122.0/24
masq ports: 1024-65535
3    MASQUERADE  all  --  192.168.122.0/24    !192.168.122.0/24

Table: mangle
Chain PREROUTING (policy ACCEPT)
num  target     prot opt source               destination

Chain INPUT (policy ACCEPT)
num  target     prot opt source               destination

Chain FORWARD (policy ACCEPT)
num  target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
num  target     prot opt source               destination

Chain POSTROUTING (policy ACCEPT)
num  target     prot opt source               destination
1    CHECKSUM   udp  --  0.0.0.0/0            0.0.0.0/0           udp
dpt:68 CHECKSUM fill

Table: filter
Chain INPUT (policy ACCEPT)
num  target     prot opt source               destination
1    ACCEPT     udp  --  0.0.0.0/0            0.0.0.0/0           udp dpt:53
2    ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:53
3    ACCEPT     udp  --  0.0.0.0/0            0.0.0.0/0           udp dpt:67
4    ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:67
5    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
state RELATED,ESTABLISHED
6    ACCEPT     icmp --  0.0.0.0/0            0.0.0.0/0
7    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
8    ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0
state NEW tcp dpt:22
9    REJECT     all  --  0.0.0.0/0            0.0.0.0/0
reject-with icmp-host-prohibited

Chain FORWARD (policy ACCEPT)
num  target     prot opt source               destination
1    ACCEPT     all  --  0.0.0.0/0            192.168.122.0/24
state RELATED,ESTABLISHED
2    ACCEPT     all  --  192.168.122.0/24     0.0.0.0/0
3    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
4    REJECT     all  --  0.0.0.0/0            0.0.0.0/0
reject-with icmp-port-unreachable
5    REJECT     all  --  0.0.0.0/0            0.0.0.0/0
reject-with icmp-port-unreachable
6    REJECT     all  --  0.0.0.0/0            0.0.0.0/0
reject-with icmp-host-prohibited

Chain OUTPUT (policy ACCEPT)
num  target     prot opt source               destination
--- [/iptables status] ---

Any idea?

Thank you very much!

Best,

-- Marco