NFS4 problems -

[Ed Greshko]

On 12/04/2012 12:56 AM, Bob Goodwin - Zuni, Virginia, USA wrote:

cat time again.....


>
>    [root at box7 bobg]# cat /etc/fstab

This is the CLIENT....  Yes?

>    #
>    # /etc/fstab
>    # Created by anaconda on Tue Aug  7 08:37:16 2012
>    #
>    # Accessible filesystems, by reference, are maintained under '/dev/disk'
>    # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for
>    more info
>    #
>    UUID=4ce86523-2d45-4174-85e9-fd298e4516c8 / ext4    defaults        1 1
>    UUID=1a9d0937-2247-4cbc-b27d-4775c7453dba /boot ext4      defaults        1 2
>    UUID=96a666e2-73ac-4f5f-98bc-4a6a9383491f /home ext4      defaults        1 2
>    UUID=9cb5a7e0-c752-4563-b7f5-663980e090e3 swap swap      defaults        0 0
>
>
>    192.168.1.8:/nfs4exports/     /mnt/BOX8     nfs4     rw,bind 0 0
>    192.168.1.8:/home/   /mnt/HOME1/     nfs4    rw,bind  0 0
>    192.168.1.8:/data/   /mnt/DATA1      nfs4    rw,bind  0 0

Why do you have "bind" listed in the options for a remote mount?  It should be defaults,rw,user just like you have for 192.168.1.48.


Just to make sure I am understanding what you've done....

On 192.168.1.8 (the server)  show the output of....

cd /
ls -l


>    192.168.1.48:/SRVR1              /mnt/BOX48      nfs4
>    defaults,rw,user 0 0
>
> The server box48 mounts during the boot process, box8 does not. I see the following lines in "mount":
>
>    /dev/sdb3 on /mnt/BOX8 type ext4 (rw,relatime,seclabel,data=ordered)
>    /dev/sdb3 on /mnt/HOME1 type ext4 (rw,relatime,seclabel,data=ordered)
>    /dev/sdb3 on /mnt/DATA1 type ext4 (rw,relatime,seclabel,data=ordered)
>    192.168.1.48://SRVR1 on /mnt/BOX48 type nfs4
>    (rw,nosuid,nodev,noexec,relatime,vers=4.0,rsize=262144,wsize=262144,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,clientaddr=192.168.1.7,local_lock=none,addr=192.168.1.48)
>    gvfs-fuse-daemon on /run/user/bobg/gvfs type fuse.gvfs-fuse-daemon
>    (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
>
> Which raises the question why are the non-working mounts shown as /dev/sdbx while the one that mounts [box48] does not? Then after mounting manually with "[root at box7 bobg]# mount 192.168.1.8:/home/   /mnt/HOME1/" mount shows:
>
>    192.168.1.8:/home on /mnt/HOME1 type nfs4
>    (rw,relatime,vers=4.0,rsize=524288,wsize=524288,namlen=255,hard,proto=tcp,port=0,timeo=600,retrans=2,sec=sys,clientaddr=192.168.1.7,local_lock=none,addr=192.168.1.8)
>
> Any thoughts? I am getting nowhere on it.
>
>

Because "bind" in in your fstab on the client....



-- 
Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning. -- Rick Cook, The Wizardry Compiled