how can i get widescren display on my new Dell 3010?

[Gary Kline]

On Thu, Dec 13, 2012 at 09:20:21AM +0800, Ed Greshko wrote:
> On 12/13/2012 09:11 AM, Gary Kline wrote:
> > On Thu, Dec 13, 2012 at 08:45:03AM +0800, Ed Greshko wrote:
> >> On 12/13/2012 08:35 AM, Gary Kline wrote:
> >>>> Did you post the output from the "working" system?
> >>>>> In the output the line
> >>>>>
> >>>>> 1920x1080 60.0*+
> >>>>>
> >>>>> Indicates by * that this is the current mode and by the + indicates that the preferred mode of the attached monitor is 1920x1080.
> >>>>>
> >>> 	"tao" is my new quad optplex that  refuses to display above
> >>> 	1280x1024.  my "working" system is dubbed "ethos".  it's got
> >>> 	1920x1080 which is what I want own my new computer.  DEspite 
> >>> 	the token that are shown after the lines of resolution, the
> >>> 	output on "tao is only 1280x1024. {for some reason I cannot get 
> >>> 	a ksnapshot of my scrren resolution; I'm missing kio_file.}
> >> That is "strange".  Your system certainly thinks it is driving at 1920x1080.
> >>
> >> Does anything happen if you issue the command....
> >>
> >> xrandr --output VGA-1 --auto   (you can used this command as the currently running user.  No need for root)
> >>
> > pts/5 17:02 <ethos> [4690] ssh -X tao
> > kline at tao's password: 
> > Last login: Wed Dec 12 16:48:19 2012
> > pts/8 17:03 <tao> [4662] xrandr --output VGA-1 --auto
> > pts/8 17:04 <tao> [4663]                        
> >
> >
> > 	strange:  ==nothing==.  what Should be displayed?  [if anything?]
> 
> Nothing should be displayed.  The command will switch the mode.  "auto" means to switch to the default.
> 
> You could also try....
> 
> xrandr --output VGA-1 --mode 1152x864  to see if that makes a change....
> 
> I noticed you "ssh'd" into the system.  I don't know that xrandr would be effective when using a "remote" session.  Can you try entering on the actual console?

	dunno.  here, FWIW, is % xranda >& /tmp/file, the ampersand to 
	capture the first line:


xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 400, current 1280 x 1024, maximum 1280 x 1024
default connected 1280x1024+0+0 0mm x 0mm
   1280x1024       0.0* 
   1152x864        0.0  
   1024x768        0.0  
   800x600         0.0  
   640x480         0.0  
   720x400         0.0  

	And this is what I actually get as my resolution.  next is what 
	is ignored by your xrand --output ... line::


   pts/4 18:11 <tao> [4692] xrandr --output VGA-1 --mode 1152x864
   xrandr: Failed to get size of gamma for output default
   warning: output VGA-1 not found; ignoring
   pts/4 18:12 <tao> [4693]                      



   next, for the heck of it, I tried the next-larger res: 1280x1024 and
   only got the "usage:" string for xrandr.  anything you--or anybody--
   see from the data captured??  like, am I missing some driver module, or
   part-of?  im totally out of ideas.


> -- 
> Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning. -- Rick Cook, The Wizardry Compiled
> -- 
> users mailing list
> users at lists.fedoraproject.org
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> Have a question? Ask away: http://ask.fedoraproject.org

-- 
 Gary Kline  kline at thought.org  http://www.thought.org  Public Service Unix
              Twenty-six years of service to the Unix community.