xsane problem -

[Konstantin Svist]

On 02/17/2012 03:28 PM, Bob Goodwin wrote:
>    This is a new install F-16/64 recently updated. Xsane is unable to
>    detect the HP Scanjet 5370c scanner. Reports "no devices available."
>
>    It appears to be detected as a USB device:
>
>        [bobg at box6 ~]$ lsusb
>        Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>        Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>        Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>        Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>        Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>        Bus 002 Device 002: ID 046d:c408 Logitech, Inc. Marble Mouse
>        (4-button)
>        Bus 002 Device 003: ID 03f0:0701 Hewlett-Packard ScanJet 
> 5300c/5370c
>
>    I do not usually have trouble getting this scanner working, normally
>    just yum install xsane and it's ready to go. Not so today however
>    and of course I needed it working half an hour ago!
>
>    Need help troubleshooting.
>
>    Thanks,
>
>    Bob

I would check for other sane packages - some have device drivers. 
Install them all to be sure