failing drives or false positives
Brian West
bionicfreeze at gmail.com
Thu Nov 22 16:13:49 UTC 2012
Hi everyone
yesterday i began receiving messages from one of my drives in my hard
drive dock that it could be failing. so i tested my notebooks drive and
the docked drive in question both said tests completed without error
both short and extended tests were performed is my drive really failing
or is this a false positive. logs for each drive are below what really
gets me is both of the drives give the exact same output for the most
part should i be concerned? Thanks in advance for your time.
Brian West
notebook drive
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.6.6-1.fc17.x86_64] (local
build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA (Adv. Format)
Device Model: WDC WD3200BPVT-75ZEST0
Serial Number: WD-WXH1AA0P0390
LU WWN Device Id: 5 0014ee 205307af1
Firmware Version: 01.01A01
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Nov 22 02:41:01 2012 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 7200) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 86) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
Always - 1
3 Spin_Up_Time 0x0027 150 145 021 Pre-fail
Always - 1458
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 680
5 Reallocated_Sector_Ct 0x0033 183 183 140 Pre-fail
Always - 130
7 Seek_Error_Rate 0x002e 200 200 000 Old_age
Always - 0
9 Power_On_Hours 0x0032 081 081 000 Old_age
Always - 14589
10 Spin_Retry_Count 0x0032 100 100 000 Old_age
Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 675
191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age
Always - 192473
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
Always - 198
193 Load_Cycle_Count 0x0032 001 001 000 Old_age
Always - 637003
194 Temperature_Celsius 0x0022 090 080 000 Old_age
Always - 53
196 Reallocated_Event_Count 0x0032 140 140 000 Old_age
Always - 60
197 Current_Pending_Sector 0x0032 200 200 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age
Offline - 0
240 Head_Flying_Hours 0x0032 081 081 000 Old_age
Always - 14238
241 Total_LBAs_Written 0x0032 200 200 000 Old_age
Always - 46363867885
242 Total_LBAs_Read 0x0032 200 200 000 Old_age
Always - 52858747844
254 Free_Fall_Sensor 0x0032 200 200 000 Old_age
Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 14589 -
# 2 Short offline Completed without error 00% 14588 -
# 3 Short offline Completed without error 00% 13991 -
# 4 Short offline Completed without error 00% 12205 -
# 5 Short offline Completed without error 00% 11481 -
# 6 Short offline Aborted by host 10% 10785 -
# 7 Short offline Completed without error 00% 10046 -
# 8 Short offline Completed without error 00% 8099 -
# 9 Short offline Interrupted (host reset) 80% 7418 -
#10 Short offline Completed without error 00% 7414 -
#11 Short offline Completed without error 00% 7165 -
#12 Short offline Completed without error 00% 5571 -
#13 Short offline Completed without error 00% 4852 -
#14 Short offline Completed without error 00% 4179 -
#15 Short offline Completed without error 00% 4110 -
#16 Short offline Completed without error 00% 3511 -
#17 Short offline Completed without error 00% 3103 -
#18 Short offline Completed without error 00% 2832 -
#19 Short offline Completed without error 00% 2468 -
#20 Short offline Completed without error 00% 1935 -
#21 Short offline Completed without error 00% 1934 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
docked drive
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.6.6-1.fc17.x86_64] (local
build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda Green (Adv. Format)
Device Model: ST2000DL003-9VT166
Serial Number: 5YD3P2KW
LU WWN Device Id: 5 000c50 038afe3ca
Firmware Version: CC32
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Thu Nov 22 06:19:09 2012 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 612) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 331) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x30b7) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 114 099 006 Pre-fail
Always - 82848824
3 Spin_Up_Time 0x0003 093 092 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 980
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 065 060 030 Pre-fail
Always - 3364769
9 Power_On_Hours 0x0032 088 088 000 Old_age
Always - 10931
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 113
183 Runtime_Bad_Block 0x0032 072 072 000 Old_age
Always - 28
184 End-to-End_Error 0x0032 100 100 099 Old_age
Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age
Always - 0
188 Command_Timeout 0x0032 100 098 000 Old_age
Always - 73015558162
189 High_Fly_Writes 0x003a 100 100 000 Old_age
Always - 0
190 Airflow_Temperature_Cel 0x0022 063 054 045 Old_age
Always - 37 (0 1 40 34 0)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age
Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age
Always - 98
193 Load_Cycle_Count 0x0032 100 100 000 Old_age
Always - 990
194 Temperature_Celsius 0x0022 037 046 000 Old_age
Always - 37 (128 0 0 0 0)
195 Hardware_ECC_Recovered 0x001a 018 009 000 Old_age
Always - 82848824
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 2
240 Head_Flying_Hours 0x0000 100 253 000 Old_age
Offline - 279336083001181
241 Total_LBAs_Written 0x0000 100 253 000 Old_age
Offline - 3086913665
242 Total_LBAs_Read 0x0000 100 253 000 Old_age
Offline - 3886422807
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 10931 -
# 2 Extended offline Aborted by host 90% 10926 -
# 3 Extended offline Interrupted (host reset) 90% 10925 -
# 4 Short offline Completed without error 00% 10924 -
# 5 Short offline Completed without error 00% 10924 -
# 6 Extended offline Aborted by host 90% 10924 -
# 7 Short offline Completed without error 00% 9056 -
# 8 Short offline Completed without error 00% 7390 -
# 9 Short offline Interrupted (host reset) 40% 2805 -
#10 Short offline Completed without error 00% 2797 -
#11 Short offline Completed without error 00% 1961 -
#12 Short offline Completed without error 00% 350 -
#13 Short offline Completed without error 00% 10 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
More information about the users
mailing list