mounting one usb interface (from 2 identified)

[Ranjan Maitra]

Hi,

Following up on my previous e-mail, I wanted to mention that two usb
interfaces are being recognized. Here is the relevant output of 

% usb-devices

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 15 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0bb4 ProdID=0c02 Rev=02.22
S:  Manufacturer=ARNOVA 10
S:  Product=ARNOVA 10
S:  SerialNumber=11223344
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=256mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50
Driver=usb-storage 
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42
Prot=01 Driver=(none)

I want to mount this as a USB storage device, so that i can access the
filesystem.

Question: How do I mount the first interface?

Many thanks and best wishes,
Ranjan


-- 
Important Notice: This mailbox is ignored: e-mails are set to be
deleted on receipt. For those needing to send personal or professional
e-mail, please use appropriate addresses.

____________________________________________________________
FREE 3D MARINE AQUARIUM SCREENSAVER - Watch dolphins, sharks & orcas on your desktop!
Check it out at http://www.inbox.com/marineaquarium