Purge old eth1, add new nic as eth0

Frank Murphy frankly3d at gmail.com
Sat Oct 13 12:56:09 UTC 2012


On 13/10/12 12:53, Reindl Harald wrote:
>
>
> cat /etc/udev/rules.d/70-persistent-net.rules
> # PCI device 0x8086:0x1502 (e1000e)
> SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="3c:d9:2c:65:95:9f", ATTR{dev_id}=="0x0",
> ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

Where do I find some of this info to put in the udev rule.
It's not being auto-generated.

using lshw I get:

  *-network:0
                 description: Ethernet interface
                 product: RTL-8169 Gigabit Ethernet
                 vendor: Realtek Semiconductor Co., Ltd.
                 physical id: 0
                 bus info: pci at 0000:05:00.0
                 logical name: rename2
                 version: 10
                 serial: 00:22:3f:f1:f2:d8
                 size: 1Gbit/s
                 capacity: 1Gbit/s
                 width: 32 bits
                 clock: 66MHz
                 capabilities: pm bus_master cap_list rom ethernet 
physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
                 configuration: autonegotiation=on broadcast=yes 
driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.0.6 
latency=64 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII 
speed=1Gbit/s
                 resources: irq:16 ioport:e800(size=256) 
memory:febffc00-febffcff memory:febc0000-febdffff
            *-network:1
                 description: Ethernet interface
                 product: RTL-8169 Gigabit Ethernet
                 vendor: Realtek Semiconductor Co., Ltd.
                 physical id: 1
                 bus info: pci at 0000:05:01.0
                 logical name: eth1
                 version: 10
                 serial: 64:70:02:00:43:c2
                 size: 1Gbit/s
                 capacity: 1Gbit/s
                 width: 32 bits
                 clock: 66MHz
                 capabilities: pm bus_master cap_list rom ethernet 
physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
                 configuration: autonegotiation=on broadcast=yes 
driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.0.149 
latency=64 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII 
speed=1Gbit/s
                 resources: irq:17 ioport:e400(size=256) 
memory:febff800-febff8ff memory:feba0000-febbffff



-- 
Regards,
Frank
"Jack of all, fubars"


More information about the users mailing list