Purge old eth1, add new nic as eth0

JD jd1008 at gmail.com
Mon Oct 15 17:02:16 UTC 2012


On 10/13/2012 05:53 AM, Reindl Harald wrote:
>
> Am 13.10.2012 13:46, schrieb Frank Murphy:
>> How can I completly remove all remnants of an old eth1
>> Everytime I go to add a new nic it wants to call it eth1
>>
>> I will be replacing the old nic with ano identical chipped card,
>> which it wants to call eth1
>>
>> I would prefer eth0
>>
>> F17 using system-config-network
>> I have through s-c-n removed all hardware nic,
>> also removeed ~/network-scripts/ifcfg-eth*
>> Keeps coming back
>>
>> Where else do I look
> /etc/udev/rules.d/70-persistent-net.rules this is the only
> place which matters for manual NIC-naming and ifcfg_eth*
> scripts should NOT contain MAC-addresses to leave the
> udev-rule the only point to assign
>
> you need to reboot or restat udev
>
> cat /etc/udev/rules.d/70-persistent-net.rules
> # PCI device 0x8086:0x1502 (e1000e)
> SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="3c:d9:2c:65:95:9f", ATTR{dev_id}=="0x0",
> ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
>
> # PCI device 0x8086:0x10d3 (e1000e)
> SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:1b:21:a6:91:e4", ATTR{dev_id}=="0x0",
> ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
>
> # PCI device 0x168c:0x0024 (ath9k)
> SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="fc:75:12:5e:cf:e5", ATTR{dev_id}=="0x0",
> ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"
>
>
>
On my system,  log in var log messages shows
/var/log/messages-20120930:Sep 26 08:43:22 localhost kernel: [ 5.935732] 
eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 19, 00:03:0d:15:2b:9e
/var/log/messages-20121007:Oct  4 18:18:39 localhost 
system-config-network[27851]: rm 
//etc/sysconfig/networking/profiles/default/ifcfg-eth0

But in /etc/udev/rules.d/70-persistent-net.rules
I have
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", 
ATTR{address}=="00:03:0d:13:0b:0e", ATTR{dev_id}=="0x0", 
ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

So, ifconfig returns no info about eth0, or any eth# device.





More information about the users mailing list