fdisk/dh -f do not show the SanDisk sdc of and SD reader

Kevin Wilson wkevils at gmail.com
Fri Dec 6 16:25:02 UTC 2013


Hello,
I have fedore 18.
When I insert an SD reader with an sdc card (SanDisk), I get the
following messages in syslog (however, fdisk -l or df -h do not show
the sd device, only one hard disk sata device):

Dec  6 20:02:51 a kernel: [   85.667051] usb 1-10: new high-speed USB
device number 4 using ehci_hcd
Dec  6 20:02:51 a kernel: [   85.782821] usb 1-10: New USB device
found, idVendor=0cf2, idProduct=6230
Dec  6 20:02:51 a kernel: [   85.782828] usb 1-10: New USB device
strings: Mfr=1, Product=2, SerialNumber=4
Dec  6 20:02:51 a kernel: [   85.782835] usb 1-10: Product: UB623X
Dec  6 20:02:51 a kernel: [   85.782840] usb 1-10: Manufacturer: ENE Flash
Dec  6 20:02:51 a kernel: [   85.782845] usb 1-10: SerialNumber: 606569746801
Dec  6 20:02:51 a mtp-probe: checking bus 1, device 4:
"/sys/devices/pci0000:00/0000:00:02.1/usb1/1-10"
Dec  6 20:02:51 a mtp-probe: bus: 1, device: 4 was not an MTP device
Dec  6 20:02:51 a kernel: [   85.839162] Initializing USB Mass Storage driver...
Dec  6 20:02:51 a kernel: [   85.839472] scsi6 : usb-storage 1-10:1.0
Dec  6 20:02:51 a kernel: [   85.839643] usbcore: registered new
interface driver usb-storage
Dec  6 20:02:51 a kernel: [   85.839646] USB Mass Storage support registered.
Dec  6 20:02:52 a kernel: [   86.842137] scsi 6:0:0:0: Direct-Access
  USB2.0   CardReader CF    0100 PQ: 0 ANSI: 0
Dec  6 20:02:52 a kernel: [   86.842601] scsi 6:0:0:1: Direct-Access
  USB2.0   CardReader SM XD 0100 PQ: 0 ANSI: 0
Dec  6 20:02:52 a kernel: [   86.843504] scsi 6:0:0:2: Direct-Access
  USB2.0   CardReader MS    0100 PQ: 0 ANSI: 0
Dec  6 20:02:52 a kernel: [   86.843992] scsi 6:0:0:3: Direct-Access
  USB2.0   CardReader SD    0100 PQ: 0 ANSI: 0
Dec  6 20:02:52 a kernel: [   86.846126] sd 6:0:0:0: Attached scsi
generic sg1 type 0
Dec  6 20:02:52 a kernel: [   86.846453] sd 6:0:0:1: Attached scsi
generic sg2 type 0
Dec  6 20:02:52 a kernel: [   86.846805] sd 6:0:0:2: Attached scsi
generic sg3 type 0
Dec  6 20:02:52 a kernel: [   86.847157] sd 6:0:0:3: Attached scsi
generic sg4 type 0
Dec  6 20:02:52 a kernel: [   86.857981] sd 6:0:0:0: [sdb] Attached
SCSI removable disk
Dec  6 20:02:52 a kernel: [   86.858993] sd 6:0:0:1: [sdc] Attached
SCSI removable disk
Dec  6 20:02:52 a kernel: [   86.859994] sd 6:0:0:2: [sdd] Attached
SCSI removable disk
Dec  6 20:02:52 a kernel: [   86.860979] sd 6:0:0:3: [sde] Attached
SCSI removable disk

any ideas?


More information about the users mailing list