fdisk/dh -f do not show the SanDisk sdc of and SD reader

Roger Heflin rogerheflin at gmail.com
Fri Dec 6 17:12:10 UTC 2013


1. try inserting the card after the reader is plugged in.
2. does the reader support sdhc cards (>2gb) and if no and the card is
greater than 2gb it won't work.

On Fri, Dec 6, 2013 at 10:25 AM, Kevin Wilson <wkevils at gmail.com> wrote:
> Hello,
> I have fedore 18.
> When I insert an SD reader with an sdc card (SanDisk), I get the
> following messages in syslog (however, fdisk -l or df -h do not show
> the sd device, only one hard disk sata device):
>
> Dec  6 20:02:51 a kernel: [   85.667051] usb 1-10: new high-speed USB
> device number 4 using ehci_hcd
> Dec  6 20:02:51 a kernel: [   85.782821] usb 1-10: New USB device
> found, idVendor=0cf2, idProduct=6230
> Dec  6 20:02:51 a kernel: [   85.782828] usb 1-10: New USB device
> strings: Mfr=1, Product=2, SerialNumber=4
> Dec  6 20:02:51 a kernel: [   85.782835] usb 1-10: Product: UB623X
> Dec  6 20:02:51 a kernel: [   85.782840] usb 1-10: Manufacturer: ENE Flash
> Dec  6 20:02:51 a kernel: [   85.782845] usb 1-10: SerialNumber: 606569746801
> Dec  6 20:02:51 a mtp-probe: checking bus 1, device 4:
> "/sys/devices/pci0000:00/0000:00:02.1/usb1/1-10"
> Dec  6 20:02:51 a mtp-probe: bus: 1, device: 4 was not an MTP device
> Dec  6 20:02:51 a kernel: [   85.839162] Initializing USB Mass Storage driver...
> Dec  6 20:02:51 a kernel: [   85.839472] scsi6 : usb-storage 1-10:1.0
> Dec  6 20:02:51 a kernel: [   85.839643] usbcore: registered new
> interface driver usb-storage
> Dec  6 20:02:51 a kernel: [   85.839646] USB Mass Storage support registered.
> Dec  6 20:02:52 a kernel: [   86.842137] scsi 6:0:0:0: Direct-Access
>   USB2.0   CardReader CF    0100 PQ: 0 ANSI: 0
> Dec  6 20:02:52 a kernel: [   86.842601] scsi 6:0:0:1: Direct-Access
>   USB2.0   CardReader SM XD 0100 PQ: 0 ANSI: 0
> Dec  6 20:02:52 a kernel: [   86.843504] scsi 6:0:0:2: Direct-Access
>   USB2.0   CardReader MS    0100 PQ: 0 ANSI: 0
> Dec  6 20:02:52 a kernel: [   86.843992] scsi 6:0:0:3: Direct-Access
>   USB2.0   CardReader SD    0100 PQ: 0 ANSI: 0
> Dec  6 20:02:52 a kernel: [   86.846126] sd 6:0:0:0: Attached scsi
> generic sg1 type 0
> Dec  6 20:02:52 a kernel: [   86.846453] sd 6:0:0:1: Attached scsi
> generic sg2 type 0
> Dec  6 20:02:52 a kernel: [   86.846805] sd 6:0:0:2: Attached scsi
> generic sg3 type 0
> Dec  6 20:02:52 a kernel: [   86.847157] sd 6:0:0:3: Attached scsi
> generic sg4 type 0
> Dec  6 20:02:52 a kernel: [   86.857981] sd 6:0:0:0: [sdb] Attached
> SCSI removable disk
> Dec  6 20:02:52 a kernel: [   86.858993] sd 6:0:0:1: [sdc] Attached
> SCSI removable disk
> Dec  6 20:02:52 a kernel: [   86.859994] sd 6:0:0:2: [sdd] Attached
> SCSI removable disk
> Dec  6 20:02:52 a kernel: [   86.860979] sd 6:0:0:3: [sde] Attached
> SCSI removable disk
>
> any ideas?
> --
> users mailing list
> users at lists.fedoraproject.org
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> Have a question? Ask away: http://ask.fedoraproject.org


More information about the users mailing list