Error message that pops up in terminal windows.
Michael D. Setzer II
mikes at kuentos.guam.net
Fri Jul 19 18:44:06 UTC 2013
On 19 Jul 2013 at 12:27, Steven Stern wrote:
Date sent: Fri, 19 Jul 2013 12:27:46 -0500
From: Steven Stern <subscribed-lists at sterndata.com>
To: Community support for Fedora users
<users at lists.fedoraproject.org>
Subject: Re: Error message that pops up in terminal
windows.
> On 07/19/2013 12:16 PM, Michael D. Setzer II wrote:
> > This message shows up in terminal windows from time to time.
> > Any ideals on what is doing it and how to correct it.
> >
> > WARNING: Your hard drive is failing
> > Device: /dev/sda [SAT], 1 Offline uncorrectable sectors
> >
> > WARNING: Your hard drive is failing
> > Device: /dev/sda [SAT], 2 Offline uncorrectable sectors
> >
> > smartctl shows the disk is fine in both short and long test on disk
> > and partitions. At one time the machine was reporting all kinds of
> > soft errors with smartctl, and I replaced the disk with this new
> > one, and it continued to get the soft errors. Then installed a pci
> > sata controller instead of the on-board controller, and errors
> > stopped? So, I assumed the issue was with the onboard controller,
> > and not the disk, since it was brand new, and had put the old disk
> > in another machine, and it also has no issues. But the above error
> > messages come up, and I would like to correct it, but don't know
> > what comand or program could resolve it.
> >
> >
> >
>
> Please post the output from smartcl -a /dev/sda
It is a long list, and the 2108 errors was the number listed under
the old controller. No new errors were reported since changing the
controller.
smartctl 5.43 2012-06-30 r3573 [i686-linux-3.6.11-4.fc16.i686] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K1000.D
Device Model: Hitachi HDS721010DLE630
Serial Number: MSK523Y210UTUF
LU WWN Device Id: 5 000cca 37fce785b
Firmware Version: MS2OA650
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sat Jul 20 04:39:21 2013 ChST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 7216) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 121) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 080 080 016 Pre-fail Always - 1311407
2 Throughput_Performance 0x0005 140 140 054 Pre-fail Offline - 76
3 Spin_Up_Time 0x0007 112 112 024 Pre-fail Always - 203 (Average 206)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 26
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 4
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 108 108 020 Pre-fail Offline - 37
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 4498
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 26
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 33
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 33
194 Temperature_Celsius 0x0002 187 187 000 Old_age Always - 32 (Min/Max 25/39)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 4
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 160
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 1609
SMART Error Log Version: 1
ATA Error Count: 2108 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2108 occurred at disk power-on lifetime: 1085 hours (45 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 ea 28 20 00 Error: ICRC, ABRT 1 sectors at LBA = 0x002028ea = 2107626
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 e3 28 20 e0 08 01:10:51.049 READ DMA
c8 00 08 db 28 20 e0 08 01:10:51.049 READ DMA
c8 00 08 d3 28 20 e0 08 01:10:51.049 READ DMA
c8 00 08 cb 28 20 e0 08 01:10:51.049 READ DMA
c8 00 08 c3 28 20 e0 08 01:10:51.049 READ DMA
Error 2107 occurred at disk power-on lifetime: 1085 hours (45 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 31 f2 28 20 00 Error: ICRC, ABRT 49 sectors at LBA = 0x002028f2 = 2107634
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 23 28 20 e0 08 01:10:50.694 READ DMA
25 00 80 63 3e 20 e0 08 01:10:50.660 READ DMA EXT
c8 00 00 23 27 20 e0 08 01:10:50.505 READ DMA
c8 00 00 23 26 20 e0 08 01:10:50.502 READ DMA
c8 00 00 23 25 20 e0 08 01:10:50.500 READ DMA
Error 2106 occurred at disk power-on lifetime: 1085 hours (45 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 da 1f 20 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00201fda = 2105306
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 d3 1f 20 e0 08 01:10:49.714 READ DMA
c8 00 08 cb 1f 20 e0 08 01:10:49.714 READ DMA
c8 00 08 c3 1f 20 e0 08 01:10:49.714 READ DMA
c8 00 08 bb 1f 20 e0 08 01:10:49.714 READ DMA
c8 00 08 b3 1f 20 e0 08 01:10:49.714 READ DMA
Error 2105 occurred at disk power-on lifetime: 1085 hours (45 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 37 f7 03 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0003f737 = 259895
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 30 f7 03 e0 08 01:09:57.762 READ DMA EXT
25 00 08 28 f7 03 e0 08 01:09:57.762 READ DMA EXT
25 00 05 23 f7 03 e0 08 01:09:57.762 READ DMA EXT
25 00 03 20 f7 03 e0 08 01:09:57.762 READ DMA EXT
25 00 08 18 f7 03 e0 08 01:09:57.762 READ DMA EXT
Error 2104 occurred at disk power-on lifetime: 1085 hours (45 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 0f b1 03 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0003b10f = 241935
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 08 b1 03 e0 08 01:09:47.327 READ DMA EXT
25 00 08 00 b1 03 e0 08 01:09:47.327 READ DMA EXT
25 00 08 f8 b0 03 e0 08 01:09:47.326 READ DMA EXT
25 00 08 f0 b0 03 e0 08 01:09:47.326 READ DMA EXT
25 00 08 e8 b0 03 e0 08 01:09:47.326 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4393 -
# 2 Short offline Completed without error 00% 4392 -
# 3 Short offline Completed without error 00% 4392 -
# 4 Short offline Completed without error 00% 4392 -
# 5 Short offline Completed without error 00% 4355 -
# 6 Extended offline Completed: read failure 80% 2580 311179552
# 7 Extended offline Completed without error 00% 2316 -
# 8 Extended offline Completed without error 00% 8 -
# 9 Short offline Completed without error 00% 4 -
#10 Short offline Interrupted (host reset) 90% 3 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
>
>
> --
> -- Steve
> --
> users mailing list
> users at lists.fedoraproject.org
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have
> a question? Ask away: http://ask.fedoraproject.org
+----------------------------------------------------------+
Michael D. Setzer II - Computer Science Instructor
Guam Community College Computer Center
mailto:mikes at kuentos.guam.net
mailto:msetzerii at gmail.com
http://www.guam.net/home/mikes
Guam - Where America's Day Begins
G4L Disk Imaging Project maintainer
http://sourceforge.net/projects/g4l/
+----------------------------------------------------------+
http://setiathome.berkeley.edu (Original)
Number of Seti Units Returned: 19,471
Processing time: 32 years, 290 days, 12 hours, 58 minutes
(Total Hours: 287,489)
BOINC at HOME CREDITS
SETI 15467805.750086 | EINSTEIN 12420999.979852
ROSETTA 7991573.921902 | ABC 16163435.340645
More information about the users
mailing list