cannot open device with Xsane
Joachim Backes
joachim.backes at rhrk.uni-kl.de
Sun Jul 21 15:51:58 UTC 2013
On 07/21/2013 04:20 PM, Antonio M wrote:
> : ** Message: No devices in use, exit
> Jul 21 16:19:06 Pc-campeggio-001 xsane: common/utils.c 187: unable to
> load library libm.so: libm.so: impossibile aprire il file oggetto
> condiviso: File o directory non esistente
> Jul 21 16:19:06 Pc-campeggio-001 xsane: common/utils.c 68: unable to
> open /var/lib/hp/hplip.state: File o directory non esistente
> Jul 21 16:19:06 Pc-campeggio-001 xsane: common/utils.c 118:
> validate_plugin_version() Failed to get Plugin version from
> [/var/lib/hp/hplip.state]
> Jul 21 16:19:06 Pc-campeggio-001 xsane: common/utils.c 156: Plugin
> version is not matching
> Jul 21 16:19:06 Pc-campeggio-001 xsane: common/utils.c 219: Invalid
> Library hanlder pLibHandler = NULL.
>
>
> this is the output from var/log/messages
>
>
> 2013/7/21 Antonio M <antonio.montagnani at gmail.com
> <mailto:antonio.montagnani at gmail.com>>
>
> same packages installed, scanner is recognized by Xsane ...but then
> I get the error:
>
> it is not possible to open device:
> "hpaio:/usb/HP_Color_LaserJet_CM1312_MFP?serial=00CNF8BCG91J":there
> is an error during I/O of device. Translation may not be correct
>
>
> 2013/7/21 Joachim Backes <joachim.backes at rhrk.uni-kl.de
> <mailto:joachim.backes at rhrk.uni-kl.de>>
>
> On 07/21/2013 03:51 PM, Antonio M wrote:
>
> on a fresh F19 installation when I start Xsane or simple
> scanning,
> multifunction printer is recognized, asHP MFC 1312, but it
> says that
> device "hpaio...." cannot be opened.
>
> Any hint??
>
> --
> Antonio Montagnani
> Skype : amontag52
>
> Linux Fedora 19 Schroedinger's cat
>
>
>
> Which sane components did you install?
>
> On my box:
>
> sane-backends-1.0.23-13.fc19.__x86_64
> sane-backends-devel-1.0.23-13.__fc19.x86_64
> sane-frontends-1.0.14-16.fc19.__x86_64
> xsane-common-0.999-3.fc19.x86___64
> libsane-hpaio-3.13.6-2.fc19.__x86_64
> xsane-0.999-3.fc19.x86_64
> sane-backends-drivers-cameras-__1.0.23-13.fc19.x86_64
> sane-backends-drivers-__scanners-1.0.23-13.fc19.x86_64
> sane-backends-libs-1.0.23-13.__fc19.x86_64
>
> Especially, did you install sane-backends and
> sane-backends-drivers-__scanners?
>
> Regards
>
> Joachim Backes
>
> --
>
> Fedora release 19 (Schrödinger’s Cat): Kernel-3.9.9-302.fc19.x86_64
>
> Joachim Backes <joachim.backes at rhrk.uni-kl.de
> <mailto:joachim.backes at rhrk.uni-kl.de>__>
> https://www-user.rhrk.uni-kl.__de/~backes
> <https://www-user.rhrk.uni-kl.de/~backes>
>
>
>
>
> --
> Antonio Montagnani
> Skype : amontag52
>
> Linux Fedora 19 Schroedinger's cat
Buona sera Antonio,
If I visit sane-project.org, I do not find your scanner as a supported
device, so my question would be: is there a driver supported by HP?
Perhaps you could check this option!
Regards
Joachim Backes
--
Fedora release 19 (Schrödinger’s Cat): Kernel-3.9.9-302.fc19.x86_64
Joachim Backes <joachim.backes at rhrk.uni-kl.de>
https://www-user.rhrk.uni-kl.de/~backes
More information about the users
mailing list