san disk not seen by Linux 2.6.35.6-45.fc14.i686

Rami Rosen roszenrami at gmail.com
Sat Jun 22 07:57:39 UTC 2013


Hi,
What does fdisk -l show after you insert the  sandisk USB device ?

regards,
Rami Rosen

On Sat, Jun 22, 2013 at 1:38 AM, Randolph Jones <jonesrf1 at qwest.net> wrote:
> I have a 16gb sandisk with 2 pictures on it.
> shotwell can see the pictures when I connect my camera to usb port.
>  Linux cant see the disk when plugged in to a usb adapter. Linux can see
> other sandisks in this adapter.
>
> The partition table is corrupted (I think)
>
> Linux sees the adapter but not the 16gb disk
>
> this is output of dmesg when I plug the disk into linux
>
> [ 2866.397099] usb 6-1: USB disconnect, address 5
> [ 2869.880085] usb 6-1: new full speed USB device using ohci_hcd and
> address 6
> [ 2870.051170] usb 6-1: New USB device found, idVendor=0a48,
> idProduct=5007
> [ 2870.051181] usb 6-1: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 2870.051188] usb 6-1: Product: Secure Digital Keychain
> [ 2870.051194] usb 6-1: Manufacturer: mediaGear
> [ 2870.054850] scsi11 : usb-storage 6-1:1.0
> [ 2871.066286] scsi 11:0:0:0: Direct-Access     MG       SD-Key
> 1.00 PQ: 0 ANSI: 0
> [ 2871.070283] sd 11:0:0:0: Attached scsi generic sg6 type 0
> [ 2902.139078] usb 6-1: reset full speed USB device using ohci_hcd and
> address 6
> [ 2912.414084] usb 6-1: reset full speed USB device using ohci_hcd and
> address 6
> [ 2928.692104] usb 6-1: reset full speed USB device using ohci_hcd and
> address 6
> [ 2928.968086] usb 6-1: reset full speed USB device using ohci_hcd and
> address 6
>
> TIA
> rfjones
>
> --
> users mailing list
> users at lists.fedoraproject.org
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> Have a question? Ask away: http://ask.fedoraproject.org


More information about the users mailing list