How do I install the Wireless USB with Ralink 3070 (RT3070) Chipset?

[valent.turkovic at gmail.com]

Anybody?

On Thu, Jun 13, 2013 at 8:44 PM, valent.turkovic at gmail.com
<valent.turkovic at gmail.com> wrote:
> On Thu, Jun 13, 2013 at 4:33 PM, Ed Greshko <Ed.Greshko at greshko.com> wrote:
>> On 06/13/13 19:58, valent.turkovic at gmail.com wrote:
>>> Just posted this question to Fedora ASK page:
>>> https://ask.fedoraproject.org/question/26799/how-do-i-install-the-wireless-usb-with-ralink-3070-rt3070-chipset/
>>>
>>> I also reported this as a bug:
>>> https://bugzilla.redhat.com/show_bug.cgi?id=974072
>>>
>>> How should I report this to upstream kernel developers?
>>>
>>
>> On my F18 my USB WiFi adapter works just fine....
>>
>> [egreshko at meimei ~]$ lsusb -d 0411:015d
>> Bus 001 Device 004: ID 0411:015d BUFFALO INC. (formerly MelCo., Inc.) WLI-UC-GN Wireless LAN Adapter [Ralink RT3070]
>>
>> - Device: wlan0  [misty-net] ---------------------------------------------------
>>   Type:              802.11 WiFi
>>   Driver:            rt2800usb
>>   State:             connected
>>   Default:           no
>>   HW Address:        00:24:A5:50:70:B2
>>
>>   Capabilities:
>>     Speed:           48 Mb/s
>>
>>   Wireless Properties
>>     WEP Encryption:  yes
>>     WPA Encryption:  yes
>>     WPA2 Encryption: yes
>>
>
> That is odd... it doesn't on mine... but be have different devices,
> please send your dmesg log.
>
> lsusb:
> Bus 002 Device 004: ID 148f:3070 Ralink Technology, Corp.
> RT2870/RT3070 Wireless Adapter
>
> dmesg:
> [   76.583036] usb 2-2: new high-speed USB device number 4 using ehci-pci
> [   76.717649] usb 2-2: New USB device found, idVendor=148f, idProduct=3070
> [   76.717655] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [   76.717658] usb 2-2: Product: 802.11 n WLAN
> [   76.717660] usb 2-2: Manufacturer: Ralink
> [   76.717662] usb 2-2: SerialNumber: 1.0
> [   76.791246] cfg80211: Calling CRDA to update world regulatory domain
> [   76.811737] cfg80211: World regulatory domain updated:
> [   76.811743] cfg80211:   (start_freq - end_freq @ bandwidth),
> (max_antenna_gain, max_eirp)
> [   76.811746] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz),
> (300 mBi, 2000 mBm)
> [   76.811748] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz),
> (300 mBi, 2000 mBm)
> [   76.811749] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz),
> (300 mBi, 2000 mBm)
> [   76.811751] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz),
> (300 mBi, 2000 mBm)
> [   76.811753] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz),
> (300 mBi, 2000 mBm)
> [   76.943039] usb 2-2: reset high-speed USB device number 4 using ehci-pci
> [   77.086274] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt:
> 5390, rf: 3070, rev: 0502.
> [   77.086280] phy0 -> rt2800_init_eeprom: Error - Invalid RF chipset
> 0x3070 detected.
> [   77.086282] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
> [   77.087703] usbcore: registered new interface driver rt2800usb
>
> uname -a:
> Linux blackbox.lan 3.9.4-200.fc18.x86_64 #1 SMP Fri May 24 20:10:49
> UTC 2013 x86_64 x86_64 x86_64 GNU/Linux



-- 
follow me - www.twitter.com/valentt & http://kernelreloaded.blog385.com
linux, anime, spirituality, wireless, scuba, linuxmce smart home, zwave
ICQ: 2125241, Skype: valent.turkovic, MSN: valent.turkovic at hotmail.com