fedora 18 and lsi latest kernels don't boot

Gianluca Cecchi gianluca.cecchi at gmail.com
Sat Mar 30 16:35:30 UTC 2013

default 3.6.10-4.fc18.x86_64 f18 install kernel is ok.
Instead both

stop at boot with error and systemd emergency shell and journalctl
shows like in this picture:


any hint?
I suspect raid controller:
The same thing happens on two intel blades after I install f18 and run
a yum update.

[root at management02 ~]# cat /proc/cmdline
root=/dev/mapper/fedora_management02-root ro nomodeset rd.md=0
rd.lvm.lv=fedora_management02/root rd.dm=0
rd.lvm.lv=fedora_management02/swap rd.luks=0 vconsole.keymap=us rhgb

[root at management02 ~]# lspci|grep SCSI
04:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064ET
PCI-Express Fusion-MPT SAS (rev 08)

[root at management02 ~]# cat /proc/mpt/version
  Fusion MPT base driver
  Fusion MPT SAS host driver

[root at management02 ~]# cat /proc/mpt/summary
ioc0: LSISAS1064E B3, FwRev=011e0000h, Ports=1, MaxQ=277, IRQ=30

processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 26
model name      : Intel(R) Xeon(R) CPU           X5570  @ 2.93GHz
stepping        : 5
microcode       : 0x11
cpu MHz         : 1596.000
cache size      : 8192 KB
physical id     : 0
siblings        : 8
core id         : 0
cpu cores       : 4
apicid          : 0
initial apicid  : 0
fpu             : yes
fpu_exception   : yes
cpuid level     : 11
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl
xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2
ssse3 cx16 xtpr pdcm dca sse4_1 sse4_2 popcnt lahf_lm ida dtherm
tpr_shadow vnmi flexpriority ept vpid
bogomips        : 5852.54
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management:


Thanks in advance,

More information about the users mailing list