Cannot mount MMC (don't see the partition with fdisk -l)

[Andy Johnson]

Hello,

I am trying to mount an SD/MMC card on Fedora x86_64 and I cannot see it
in fdisk -l.


The SD/MMC is ENE Flash (UB623X)

These kernel modules are loaded before inserting the SD/MMC card:
mmc_block, mmc_core, usb_storage,sdhci_pci, sdhci loaded


In the kernel log, what I see after inserting it is :
May  8 07:18:30 localhost kernel: [ 2565.640033] usb 1-6: new
high-speed USB device number 7 using ehci-pci
May  8 07:18:30 localhost kernel: [ 2565.754927] usb 1-6: New USB
device found, idVendor=0cf2, idProduct=6230
May  8 07:18:30 localhost kernel: [ 2565.754935] usb 1-6: New USB
device strings: Mfr=1, Product=2, SerialNumber=4
May  8 07:18:30 localhost kernel: [ 2565.754939] usb 1-6: Product: UB623X
May  8 07:18:30 localhost kernel: [ 2565.754943] usb 1-6:
Manufacturer: ENE Flash
May  8 07:18:30 localhost kernel: [ 2565.754947] usb 1-6:
SerialNumber: 606569746801
May  8 07:18:30 localhost kernel: [ 2565.756649] scsi5 : usb-storage 1-6:1.0
May  8 07:18:30 localhost mtp-probe: checking bus 1, device 7:
"/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6"
May  8 07:18:30 localhost mtp-probe: bus: 1, device: 7 was not an MTP device
May  8 07:18:31 localhost kernel: [ 2566.758702] scsi 5:0:0:0:
Direct-Access     USB2.0   CardReader CF    0100 PQ: 0 ANSI: 0
May  8 07:18:31 localhost kernel: [ 2566.759235] scsi 5:0:0:1:
Direct-Access     USB2.0   CardReader SM XD 0100 PQ: 0 ANSI: 0
May  8 07:18:31 localhost kernel: [ 2566.759691] scsi 5:0:0:2:
Direct-Access     USB2.0   CardReader MS    0100 PQ: 0 ANSI: 0
May  8 07:18:31 localhost kernel: [ 2566.760183] scsi 5:0:0:3:
Direct-Access     USB2.0   CardReader SD    0100 PQ: 0 ANSI: 0
May  8 07:18:31 localhost kernel: [ 2566.761366] sd 5:0:0:0: Attached
scsi generic sg3 type 0
May  8 07:18:31 localhost kernel: [ 2566.763333] sd 5:0:0:1: Attached
scsi generic sg4 type 0
May  8 07:18:31 localhost kernel: [ 2566.763631] sd 5:0:0:0: [sdc]
Attached SCSI removable disk
May  8 07:18:31 localhost kernel: [ 2566.763695] sd 5:0:0:2: Attached
scsi generic sg5 type 0
May  8 07:18:31 localhost kernel: [ 2566.764047] sd 5:0:0:3: Attached
scsi generic sg6 type 0
May  8 07:18:31 localhost kernel: [ 2566.767690] sd 5:0:0:2: [sde]
Attached SCSI removable disk
May  8 07:18:31 localhost kernel: [ 2566.768693] sd 5:0:0:1: [sdd]
Attached SCSI removable disk
May  8 07:18:31 localhost kernel: [ 2566.775193] sd 5:0:0:3: [sdf]
Attached SCSI removable disk


lsusb shows it:
lsusb
...
Bus 001 Device 007: ID 0cf2:6230 ENE Technology, Inc.
...

typing:
lspci
gives:
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM
Controller (rev 10)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI
Express Root Port (rev 10)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High
Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express
Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express
Port 2 (rev 01)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA
Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce
8400 GS] (rev a2)
01:00.1 Audio device: NVIDIA Corporation High Definition Audio
Controller (rev a1)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
04:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8169
PCI Gigabit Ethernet Controller (rev 10)


what is strange for me is that I do not see it card reader in lspci. \
I expected a line like "MMC Host Controller..."


any ideas?
Andy