MTU breakage in f20

[Ed Greshko]

On 11/03/14 09:50, Ed Greshko wrote:
> What I would do is use "wireshark" with a capture filter of "icmp" and see what is going out on the wire.  What I would do is "ping -c 1 -s 2000 gw" and then check to see that 2 packets are being sent out with the first one being marked as a fragment.

And, since you said you had the problem in a F20<--->F20 situation I'd use wireshark on the receiving side as well to check what is being received. 

And, in the event that the F20 systems are connected via 10BaseT to ports on your gw....I'd reboot the gw.  :-)

-- 
If you can't laugh at yourself, others will gladly oblige.