NFS mount -

[Bob Goodwin - Zuni, Virginia, USA]

I have a problem connecting this Fedora-20 computer with an NFS server. 
I have just set up the server on Scientific Linux 7.

The mount command:

[root at box10 bobg]# mount 192.168.1.48:/mnt/nasdata  /mnt/box48/

Does nothing until it eventually times out. I can ssh into the server 
and see all the files. I tried to configure it to be nearly the same as 
another NFS server that has been working well.

[bobg at box48 ~]$ cat /etc/exports
#
#    /etc/exports

/nfs4exports 
192.168.1.0/24(ro,sync,insecure,no_root_squash,no_subtree_check,fsid=0)

/nfs4exports/data 
192.168.1.0/24(rw,sync,insecure,no_root_squash,no_subtree_check)

/nfs4exports/home 
192.168.1.0/24(rw,sync,insecure,no_root_squash,no_subtree_check)


[bobg at box48 ~]$ cat /etc/fstab

#
# /etc/fstab
# Created by anaconda on Fri Nov 14 16:24:27 2014
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=edf0c0db-d48a-46da-81b3-ef6c7b502175 / xfs     defaults        1 1
UUID=ae08aa95-4ffc-4ac4-a434-60909636c0bf /boot xfs     defaults        1 2
UUID=f3aeadd2-70bc-4f45-b6d6-2f96f602871e /home xfs     defaults        1 2
UUID=3f57869c-eca7-4196-a28f-698acf3c752c swap swap    defaults        0 0

# bind mounts

/home/data    nfs4exports/data    none    rw,bind    0 0

/home/home    nfs4exports/home    none    rw,bind    0 0


I have been referring to the Fedora Project NFS guide but apparently I 
am missing something. I tried systemctl stop iptables on the server, no 
change. I routinely mount the other NFS so I assume the problem is not 
in "Firewalld."

One difference is that the server in question has two identical drives 
configured Raid1. Apparently XFS is preferred or required, I'm nor sure 
but Anaconda kept changing ext4 to xfs so I assumed they know better 
than I do?

Any thought or suggestions appreciated,

Bob

-- 
http://www.qrz.com/db/W2BOD
box10  Fedora-20/64bit Linux/XFCE