installing fedora on HEWLETT PACKARD pavilion 500
Angelo Moreschini
mrangelo.fedora at gmail.com
Mon Mar 16 08:55:20 UTC 2015
studying this my problem (which is connected to the use of the UEFI on HP
computers in place of the traditional BIOS) I found this link:
http://www.rodsbooks.com/efi-bootloaders/index.html
There is wrote :
"The way EFI computers boot is very different from the way older computers
based on the Basic Input/Output System (BIOS) boot."
*But I didn't yet realized very well what really is this difference *.
Of course I had to disable the "secure boot" (in order to use the CD with
The Fedora installation)..
But, still, I am confused about the boot loader to use (how the Web page
says )...
Perhaps my problem come because I am using the default boot loader (Grub2)
that come with the installation of Fedora and, instead, I should change it
with another more appropriate boot-loader ???
On Mon, Mar 16, 2015 at 4:07 AM, Angelo Moreschini <
mrangelo.fedora at gmail.com> wrote:
> the output for lsblk is :
>
>
> [liveuser at localhost ~]$ lsblk
> NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
> sda 8:0 0 931.5G 0 disk
> ├─sda1 8:1 0 1023M 0 part
> ├─sda2 8:2 0 360M 0 part
> ├─sda3 8:3 0 128M 0 part
> ├─sda4 8:4 0 439.6G 0 part
> ├─sda5 8:5 0 10.4G 0 part
> ├─sda6 8:6 0 1M 0 part
> ├─sda7 8:7 0 500M 0 part /mnt/sysimage/boot
> └─sda8 8:8 0 479.6G 0 part
> ├─fedora_localhost-swap 253:3 0 7.8G 0 lvm [SWAP]
> ├─fedora_localhost-home 253:4 0 421.7G 0 lvm /mnt/sysimage/home
> └─fedora_localhost-root 253:5 0 50G 0 lvm /mnt/sysimage
> sr0 11:0 1 1.4G 0 rom /run/initramfs/live
> loop0 7:0 0 12K 1 loop
> loop1 7:1 0 1.8M 1 loop
> └─live-osimg-min 253:2 0 6G 1 dm
> loop2 7:2 0 1.3G 1 loop
> loop3 7:3 0 6G 1 loop
> ├─live-rw 253:0 0 6G 0 dm /
> ├─live-base 253:1 0 6G 1 dm
> └─live-osimg-min 253:2 0 6G 1 dm
> loop4 7:4 0 512M 0 loop
> └─live-rw 253:0 0 6G 0 dm /
> --------------------
> I see the partition I made for Fesora in sda8
>
> smartctl -x /dev/sda8 produce this output :
> ================================================
> [root at localhost ~]# smartctl -x /dev/sda8
> smartctl 6.2 2014-07-16 r3952 [x86_64-linux-3.17.4-301.fc21.x86_64] (local
> build)
> Copyright (C) 2002-13, Bruce Allen, Christian Franke,
> www.smartmontools.org
>
> === START OF INFORMATION SECTION ===
> Model Family: Seagate Barracuda 7200.14 (AF)
> Device Model: ST1000DM003-1ER162
> Serial Number: Z4Y5HTPQ
> LU WWN Device Id: 5 000c50 07aaff0a2
> Firmware Version: HP51
> User Capacity: 1,000,204,886,016 bytes [1.00 TB]
> Sector Sizes: 512 bytes logical, 4096 bytes physical
> Rotation Rate: 7200 rpm
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
> SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
> Local Time is: Mon Mar 16 04:06:01 2015 EDT
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
> AAM feature is: Unavailable
> APM level is: 128 (minimum power consumption without standby)
> Rd look-ahead is: Enabled
> Write cache is: Enabled
> ATA Security is: Disabled, frozen [SEC2]
> Wt Cache Reorder: Enabled
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
>
> General SMART Values:
> Offline data collection status: (0x00) Offline data collection activity
> was never started.
> Auto Offline Data Collection: Disabled.
> Self-test execution status: ( 0) The previous self-test routine
> completed
> without error or no self-test has ever
> been run.
> Total time to complete Offline
> data collection: ( 80) seconds.
> Offline data collection
> capabilities: (0x53) SMART execute Offline immediate.
> Auto Offline data collection on/off support.
> Suspend Offline collection upon new
> command.
> No Offline surface scan supported.
> Self-test supported.
> No Conveyance Self-test supported.
> Selective Self-test supported.
> SMART capabilities: (0x0003) Saves SMART data before entering
> power-saving mode.
> Supports SMART auto save timer.
> Error logging capability: (0x01) Error logging supported.
> General Purpose Logging supported.
> Short self-test routine
> recommended polling time: ( 2) minutes.
> Extended self-test routine
> recommended polling time: ( 104) minutes.
> SCT capabilities: (0x103f) SCT Status supported.
> SCT Error Recovery Control supported.
> SCT Feature Control supported.
> SCT Data Table supported.
>
> SMART Attributes Data Structure revision number: 10
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
> 1 Raw_Read_Error_Rate POSR-K 115 100 006 - 84045512
> 3 Spin_Up_Time PO---K 098 098 000 - 0
> 4 Start_Stop_Count -O--CK 100 100 020 - 102
> 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
> 7 Seek_Error_Rate POSR-K 063 060 030 - 1885699
> 9 Power_On_Hours -O--CK 100 100 000 - 76
> 10 Spin_Retry_Count PO--CK 100 100 097 - 0
> 12 Power_Cycle_Count -O--CK 100 100 020 - 98
> 180 Unknown_HDD_Attribute -O-R-K 100 100 000 - 910152834
> 183 Runtime_Bad_Block -O--CK 100 100 000 - 0
> 184 End-to-End_Error PO--CK 100 100 097 - 0
> 187 Reported_Uncorrect -O--CK 100 100 000 - 0
> 188 Command_Timeout -O--CK 100 100 000 - 0 0 0
> 189 High_Fly_Writes -O-RCK 100 100 000 - 0
> 190 Airflow_Temperature_Cel -O---K 070 064 045 - 30 (Min/Max
> 28/31)
> 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
> 192 Power-Off_Retract_Count -O--CK 100 100 000 - 27
> 193 Load_Cycle_Count -O--CK 100 100 000 - 466
> 194 Temperature_Celsius -O---K 030 040 000 - 30 (0 18 0 0
> 0)
> 196 Reallocated_Event_Count -O--CK 100 100 036 - 0
> 197 Current_Pending_Sector -O--CK 100 100 000 - 0
> 198 Offline_Uncorrectable ----CK 100 100 000 - 0
> 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
> ||||||_ K auto-keep
> |||||__ C event count
> ||||___ R error rate
> |||____ S speed/performance
> ||_____ O updated online
> |______ P prefailure warning
>
> General Purpose Log Directory Version 1
> SMART Log Directory Version 1 [multi-sector log support]
> Address Access R/W Size Description
> 0x00 GPL,SL R/O 1 Log Directory
> 0x01 SL R/O 1 Summary SMART error log
> 0x02 SL R/O 5 Comprehensive SMART error log
> 0x03 GPL R/O 5 Ext. Comprehensive SMART error log
> 0x06 SL R/O 1 SMART self-test log
> 0x07 GPL R/O 1 Extended self-test log
> 0x09 SL R/W 1 Selective self-test log
> 0x10 GPL R/O 1 NCQ Command Error log
> 0x11 GPL R/O 1 SATA Phy Event Counters
> 0x21 GPL R/O 1 Write stream error log
> 0x22 GPL R/O 1 Read stream error log
> 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
> 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
> 0xa1 GPL,SL VS 20 Device vendor specific log
> 0xa2 GPL VS 4496 Device vendor specific log
> 0xa8 GPL,SL VS 129 Device vendor specific log
> 0xa9 GPL,SL VS 1 Device vendor specific log
> 0xab GPL VS 1 Device vendor specific log
> 0xb0 GPL VS 5176 Device vendor specific log
> 0xb6 GPL VS 1918 Device vendor specific log
> 0xbe-0xbf GPL VS 65535 Device vendor specific log
> 0xc1 GPL,SL VS 10 Device vendor specific log
> 0xe0 GPL,SL R/W 1 SCT Command/Status
> 0xe1 GPL,SL R/W 1 SCT Data Transfer
>
> SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
> No Errors Logged
>
> SMART Extended Self-test Log Version: 1 (1 sectors)
> Num Test_Description Status Remaining
> LifeTime(hours) LBA_of_first_error
> # 1 Short offline Completed without error 00%
> 30 -
> # 2 Extended offline Interrupted (host reset) 00%
> 1 -
>
> SMART Selective self-test log data structure revision number 1
> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> 1 0 0 Not_testing
> 2 0 0 Not_testing
> 3 0 0 Not_testing
> 4 0 0 Not_testing
> 5 0 0 Not_testing
> Selective self-test flags (0x0):
> After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0 minute delay.
>
> SCT Status Version: 3
> SCT Version (vendor specific): 522 (0x020a)
> SCT Support Level: 1
> Device State: Active (0)
> Current Temperature: 30 Celsius
> Power Cycle Min/Max Temperature: 28/31 Celsius
> Lifetime Min/Max Temperature: 18/35 Celsius
> Under/Over Temperature Limit Count: 0/0
> SCT Temperature History Version: 2
> Temperature Sampling Period: 1 minute
> Temperature Logging Interval: 59 minutes
> Min/Max recommended Temperature: 14/55 Celsius
> Min/Max Temperature Limit: 10/60 Celsius
> Temperature History Size (Index): 128 (1)
>
> Index Estimated Time Temperature Celsius
> 2 2015-03-10 23:03 30 ***********
> 3 2015-03-11 00:02 ? -
> 4 2015-03-11 01:01 23 ****
> 5 2015-03-11 02:00 ? -
> 6 2015-03-11 02:59 20 *
> 7 2015-03-11 03:58 ? -
> 8 2015-03-11 04:57 27 ********
> 9 2015-03-11 05:56 ? -
> 10 2015-03-11 06:55 28 *********
> 11 2015-03-11 07:54 ? -
> 12 2015-03-11 08:53 28 *********
> 13 2015-03-11 09:52 29 **********
> 14 2015-03-11 10:51 29 **********
> 15 2015-03-11 11:50 29 **********
> 16 2015-03-11 12:49 ? -
> 17 2015-03-11 13:48 18 -
> 18 2015-03-11 14:47 ? -
> 19 2015-03-11 15:46 23 ****
> 20 2015-03-11 16:45 ? -
> 21 2015-03-11 17:44 26 *******
> 22 2015-03-11 18:43 ? -
> 23 2015-03-11 19:42 27 ********
> 24 2015-03-11 20:41 ? -
> 25 2015-03-11 21:40 28 *********
> 26 2015-03-11 22:39 ? -
> 27 2015-03-11 23:38 31 ************
> 28 2015-03-12 00:37 ? -
> 29 2015-03-12 01:36 31 ************
> 30 2015-03-12 02:35 ? -
> 31 2015-03-12 03:34 31 ************
> 32 2015-03-12 04:33 ? -
> 33 2015-03-12 05:32 31 ************
> 34 2015-03-12 06:31 ? -
> 35 2015-03-12 07:30 21 **
> 36 2015-03-12 08:29 ? -
> 37 2015-03-12 09:28 25 ******
> 38 2015-03-12 10:27 ? -
> 39 2015-03-12 11:26 26 *******
> 40 2015-03-12 12:25 ? -
> 41 2015-03-12 13:24 28 *********
> 42 2015-03-12 14:23 ? -
> 43 2015-03-12 15:22 28 *********
> 44 2015-03-12 16:21 ? -
> 45 2015-03-12 17:20 28 *********
> 46 2015-03-12 18:19 ? -
> 47 2015-03-12 19:18 29 **********
> 48 2015-03-12 20:17 ? -
> 49 2015-03-12 21:16 29 **********
> 50 2015-03-12 22:15 ? -
> 51 2015-03-12 23:14 29 **********
> 52 2015-03-13 00:13 ? -
> 53 2015-03-13 01:12 26 *******
> 54 2015-03-13 02:11 ? -
> 55 2015-03-13 03:10 28 *********
> 56 2015-03-13 04:09 ? -
> 57 2015-03-13 05:08 31 ************
> 58 2015-03-13 06:07 ? -
> 59 2015-03-13 07:06 30 ***********
> 60 2015-03-13 08:05 ? -
> 61 2015-03-13 09:04 21 **
> 62 2015-03-13 10:03 ? -
> 63 2015-03-13 11:02 21 **
> 64 2015-03-13 12:01 ? -
> 65 2015-03-13 13:00 21 **
> 66 2015-03-13 13:59 ? -
> 67 2015-03-13 14:58 21 **
> 68 2015-03-13 15:57 ? -
> 69 2015-03-13 16:56 22 ***
> 70 2015-03-13 17:55 ? -
> 71 2015-03-13 18:54 23 ****
> 72 2015-03-13 19:53 ? -
> 73 2015-03-13 20:52 25 ******
> 74 2015-03-13 21:51 ? -
> 75 2015-03-13 22:50 26 *******
> 76 2015-03-13 23:49 ? -
> 77 2015-03-14 00:48 26 *******
> 78 2015-03-14 01:47 ? -
> 79 2015-03-14 02:46 27 ********
> 80 2015-03-14 03:45 ? -
> 81 2015-03-14 04:44 29 **********
> 82 2015-03-14 05:43 ? -
> 83 2015-03-14 06:42 29 **********
> 84 2015-03-14 07:41 29 **********
> 85 2015-03-14 08:40 30 ***********
> 86 2015-03-14 09:39 29 **********
> ... ..( 4 skipped). .. **********
> 91 2015-03-14 14:34 29 **********
> 92 2015-03-14 15:33 28 *********
> 93 2015-03-14 16:32 29 **********
> ... ..( 4 skipped). .. **********
> 98 2015-03-14 21:27 29 **********
> 99 2015-03-14 22:26 28 *********
> 100 2015-03-14 23:25 29 **********
> 101 2015-03-15 00:24 29 **********
> 102 2015-03-15 01:23 28 *********
> 103 2015-03-15 02:22 29 **********
> 104 2015-03-15 03:21 28 *********
> 105 2015-03-15 04:20 28 *********
> 106 2015-03-15 05:19 29 **********
> 107 2015-03-15 06:18 29 **********
> 108 2015-03-15 07:17 29 **********
> 109 2015-03-15 08:16 30 ***********
> 110 2015-03-15 09:15 30 ***********
> 111 2015-03-15 10:14 30 ***********
> 112 2015-03-15 11:13 29 **********
> ... ..( 10 skipped). .. **********
> 123 2015-03-15 22:02 29 **********
> 124 2015-03-15 23:01 28 *********
> 125 2015-03-16 00:00 29 **********
> 126 2015-03-16 00:59 28 *********
> 127 2015-03-16 01:58 29 **********
> 0 2015-03-16 02:57 28 *********
> 1 2015-03-16 03:56 29 **********
>
> SCT Error Recovery Control:
> Read: Disabled
> Write: Disabled
>
> Device Statistics (GP Log 0x04) not supported
>
> SATA Phy Event Counters (GP Log 0x11)
> ID Size Value Description
> 0x000a 2 4 Device-to-host register FISes sent due to a
> COMRESET
> 0x0001 2 0 Command failed due to ICRC error
> 0x0003 2 0 R_ERR response for device-to-host data FIS
> 0x0004 2 0 R_ERR response for host-to-device data FIS
> 0x0006 2 0 R_ERR response for device-to-host non-data FIS
> 0x0007 2 0 R_ERR response for host-to-device non-data FIS
>
> [root at localhost ~]#
>
>
> On Sun, Mar 15, 2015 at 11:07 AM, Chris Murphy <lists at colorremedies.com>
> wrote:
>
>> On Sun, Mar 15, 2015 at 12:08 AM, Angelo Moreschini
>> <mrangelo.fedora at gmail.com> wrote:
>> > Hi Chris,
>> >
>> > I send you again this message
>> >
>> > I followed your suggestion:
>> > I tried efibootmgr -v
>> > and I got this output:
>> > "efibootmgr: EFI variables are not supported on this system."
>>
>> This system isn't booting in UEFI mode.
>>
>> What do you get for
>> # lsblk
>>
>> Does it show your drive? If so,,
>> # smartctl -x /dev/sdX ##where X is probably a from the above
>> command.
>>
>>
>>
>> > ----------
>> > P.S. I cannot send you the content of dmesg.
>> > The moderator reject my message because to much size..
>> > but I can find inside it if you say me what to look for.
>> > -------------
>>
>> This is the bug I filed before I realized my problem was hardware
>> related. Under "Additional info" you'll see the lines that are missing
>> from dmesg when the problem happens.
>> https://bugzilla.redhat.com/show_bug.cgi?id=1182387
>>
>>
>> --
>> Chris Murphy
>> --
>> users mailing list
>> users at lists.fedoraproject.org
>> To unsubscribe or change subscription options:
>> https://admin.fedoraproject.org/mailman/listinfo/users
>> Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
>> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
>> Have a question? Ask away: http://ask.fedoraproject.org
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.fedoraproject.org/pipermail/users/attachments/20150316/2c806fea/attachment.html>
More information about the users
mailing list