Biting the bullet?

Ranjan Maitra maitra.mbox.ignored at inbox.com
Thu May 21 21:44:37 UTC 2015 

Hi,

I have been working on this again, but am unable to compile:

Here is the file:

$ fpaste pdf-stapler.spec 
Uploading (2.2KiB)...
http://ur1.ca/ml5wc -> http://paste.fedoraproject.org/224474/43224459

Here are the errors I get:


$ rpmbuild -bb pdf-stapler.spec 
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.5e1XxN
+ umask 022
+ cd /home/maitra/rpmbuild/BUILD
+ cd /home/maitra/rpmbuild/BUILD
+ rm -rf stapler-0.3.0
+ /usr/bin/gzip -dc /home/maitra/rpmbuild/SOURCES/stapler-0.3.0.tar.gz
+ /usr/bin/tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd stapler-0.3.0
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.0eE4rq
+ umask 022
+ cd /home/maitra/rpmbuild/BUILD
+ cd stapler-0.3.0
+ /usr/bin/python3 setup.py build
running build
running build_py
creating build
creating build/lib
creating build/lib/staplelib
copying staplelib/commands.py -> build/lib/staplelib
copying staplelib/stapler.py -> build/lib/staplelib
copying staplelib/tests.py -> build/lib/staplelib
copying staplelib/iohelper.py -> build/lib/staplelib
copying staplelib/__init__.py -> build/lib/staplelib
running egg_info
writing requirements to stapler.egg-info/requires.txt
writing stapler.egg-info/PKG-INFO
writing top-level names to stapler.egg-info/top_level.txt
writing entry points to stapler.egg-info/entry_points.txt
writing dependency_links to stapler.egg-info/dependency_links.txt
reading manifest file 'stapler.egg-info/SOURCES.txt'
writing manifest file 'stapler.egg-info/SOURCES.txt'
+ exit 0
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.eg4I03
+ umask 022
+ cd /home/maitra/rpmbuild/BUILD
+ '[' /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64 '!=' / ']'
+ rm -rf /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64
++ dirname /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64
+ mkdir -p /home/maitra/rpmbuild/BUILDROOT
+ mkdir /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64
+ cd stapler-0.3.0
+ /usr/bin/python3 setup.py install -O1 --skip-build --root /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64
running install
running install_lib
creating /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64/usr
creating /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64/usr/lib
creating /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64/usr/lib/python3.4
creating /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64/usr/lib/python3.4/site-packages
creating /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64/usr/lib/python3.4/site-packages/staplelib
copying build/lib/staplelib/commands.py -> /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64/usr/lib/python3.4/site-packages/staplelib
copying build/lib/staplelib/stapler.py -> /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64/usr/lib/python3.4/site-packages/staplelib
copying build/lib/staplelib/tests.py -> /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64/usr/lib/python3.4/site-packages/staplelib
copying build/lib/staplelib/iohelper.py -> /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64/usr/lib/python3.4/site-packages/staplelib
copying build/lib/staplelib/__init__.py -> /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64/usr/lib/python3.4/site-packages/staplelib
byte-compiling /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64/usr/lib/python3.4/site-packages/staplelib/commands.py to commands.cpython-34.pyc
  File "/usr/lib/python3.4/site-packages/staplelib/commands.py", line 33
    print input['name']
              ^
SyntaxError: Missing parentheses in call to 'print'

byte-compiling /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64/usr/lib/python3.4/site-packages/staplelib/stapler.py to stapler.cpython-34.pyc
  File "/usr/lib/python3.4/site-packages/staplelib/stapler.py", line 79
    print "Mode: %s" % mode
                   ^
SyntaxError: Missing parentheses in call to 'print'

byte-compiling /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64/usr/lib/python3.4/site-packages/staplelib/tests.py to tests.cpython-34.pyc
byte-compiling /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64/usr/lib/python3.4/site-packages/staplelib/iohelper.py to iohelper.cpython-34.pyc
  File "/usr/lib/python3.4/site-packages/staplelib/iohelper.py", line 36
    print "The password did not match."
                                      ^
SyntaxError: Missing parentheses in call to 'print'

byte-compiling /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64/usr/lib/python3.4/site-packages/staplelib/__init__.py to __init__.cpython-34.pyc
writing byte-compilation script '/tmp/tmpzhfhibts.py'
/usr/bin/python3 -O /tmp/tmpzhfhibts.py
  File "/usr/lib/python3.4/site-packages/staplelib/commands.py", line 33
    print input['name']
              ^
SyntaxError: Missing parentheses in call to 'print'

  File "/usr/lib/python3.4/site-packages/staplelib/stapler.py", line 79
    print "Mode: %s" % mode
                   ^
SyntaxError: Missing parentheses in call to 'print'

  File "/usr/lib/python3.4/site-packages/staplelib/iohelper.py", line 36
    print "The password did not match."
                                      ^
SyntaxError: Missing parentheses in call to 'print'

removing /tmp/tmpzhfhibts.py
running install_egg_info
running egg_info
writing entry points to stapler.egg-info/entry_points.txt
writing top-level names to stapler.egg-info/top_level.txt
writing requirements to stapler.egg-info/requires.txt
writing stapler.egg-info/PKG-INFO
writing dependency_links to stapler.egg-info/dependency_links.txt
reading manifest file 'stapler.egg-info/SOURCES.txt'
writing manifest file 'stapler.egg-info/SOURCES.txt'
Copying stapler.egg-info to /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64/usr/lib/python3.4/site-packages/stapler-0.3.0-py3.4.egg-info
running install_scripts
Installing stapler script to /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64/usr/bin
+ install -m 755 -d /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64//usr/sbin
+ ln -s ../bin/eject /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64//usr/sbin
+ mv /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64//usr/bin/stapler /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64//usr/bin/pdf-stapler
+ /usr/lib/rpm/find-debuginfo.sh --strict-build-id -m --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 /home/maitra/rpmbuild/BUILD/stapler-0.3.0
/usr/lib/rpm/sepdebugcrcfix: Updated 0 CRC32s, 0 CRC32s did match.
find: 'debug': No such file or directory
+ /usr/lib/rpm/check-buildroot
+ /usr/lib/rpm/brp-compress
+ /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1
Bytecompiling .py files below /home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64/usr/lib/python3.4 using /usr/bin/python3.4
*** Error compiling '/home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64/usr/lib/python3.4/site-packages/staplelib/commands.py'...
  File "/usr/lib/python3.4/site-packages/staplelib/commands.py", line 33
    print input['name']
              ^
SyntaxError: Missing parentheses in call to 'print'

*** Error compiling '/home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64/usr/lib/python3.4/site-packages/staplelib/iohelper.py'...
  File "/usr/lib/python3.4/site-packages/staplelib/iohelper.py", line 36
    print "The password did not match."
                                      ^
SyntaxError: Missing parentheses in call to 'print'

*** Error compiling '/home/maitra/rpmbuild/BUILDROOT/pdf-stapler-0.3.0-1.fc22.x86_64/usr/lib/python3.4/site-packages/staplelib/stapler.py'...
  File "/usr/lib/python3.4/site-packages/staplelib/stapler.py", line 79
    print "Mode: %s" % mode
                   ^
SyntaxError: Missing parentheses in call to 'print'

error: Bad exit status from /var/tmp/rpm-tmp.eg4I03 (%install)


RPM build errors:
    Bad exit status from /var/tmp/rpm-tmp.eg4I03 (%install)

WHat is wrong?

Thanks,
Ranjan

____________________________________________________________
FREE ONLINE PHOTOSHARING - Share your photos online with your friends and family!
Visit http://www.inbox.com/photosharing to find out more!

More information about the users mailing list