smartd errors
Paolo Galtieri
pgaltieri at gmail.com
Tue Oct 27 19:04:20 UTC 2015
I have attached the output of smartctl -x /dev/sde
Fortunately there is nothing important on this drive.
Paolo
On 10/27/2015 11:59 AM, Gordon Messmer wrote:
> On 10/27/2015 10:39 AM, Paolo Galtieri wrote:
>> I have unmounted the filesystems and run fsck on them and fsck
>> reports no errors.
>
> Bear in mind that fsck only checks the filesystem structure. It does
> not verify that the data in your files is complete or correct. The
> filesystem structure itself occupies a very small percentage of your
> disk space. The 16 bad sectors might be within your data files, in
> which case those files may now be corrupt.
>
> If you have backups, it would be a good idea to compare as many files
> to known good backups as possible, after replacing the drive.
-------------- next part --------------
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.2.3-200.fc22.x86_64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST1500LM003-9YH148
Serial Number: W110C6CD
LU WWN Device Id: 5 000c50 0495eb7ff
Firmware Version: CC9F
User Capacity: 1,500,301,910,016 bytes [1.50 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Oct 27 11:58:32 2015 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 208 (intermediate), recommended: 208
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 656) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 368) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 123 099 006 - 1088593818
3 Spin_Up_Time PO---- 095 088 000 - 0
4 Start_Stop_Count -O--CK 099 099 020 - 1273
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 075 060 030 - 34385725
9 Power_On_Hours -O--CK 072 072 000 - 25275
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 099 099 020 - 1061
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 098 098 000 - 2
188 Command_Timeout -O--CK 100 099 000 - 4295032833
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 059 044 045 Past 41 (Min/Max 40/42 #38)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 370
193 Load_Cycle_Count -O--CK 100 100 000 - 1275
194 Temperature_Celsius -O---K 041 056 000 - 41 (0 13 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 030 027 000 - 1088593818
197 Current_Pending_Sector -O--C- 100 100 000 - 16
198 Offline_Uncorrectable ----C- 100 100 000 - 16
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 25309 (37 75 0)
241 Total_LBAs_Written ------ 100 253 000 - 2141855771
242 Total_LBAs_Read ------ 100 253 000 - 2135375819
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands require SAT ATA PASS-THROUGH (16)
Read GP Log Directory failed
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x09 SL R/W 1 Selective self-test log
0x80-0x9f SL R/W 16 Host vendor specific log
0xa1 SL VS 20 Device vendor specific log
0xa8 SL VS 20 Device vendor specific log
0xa9 SL VS 1 Device vendor specific log
0xc0 SL VS 1 Device vendor specific log
0xe0 SL R/W 1 SCT Command/Status
0xe1 SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 1
ATA Error Count: 2
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2 occurred at disk power-on lifetime: 24708 hours (1029 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 d0 08 ff ff ff 4f 00 05:39:49.263 READ DMA EXT
25 d0 08 ff ff ff 4f 00 05:39:49.218 READ DMA EXT
25 d0 08 ff ff ff 4f 00 05:39:49.217 READ DMA EXT
25 d0 08 ff ff ff 4f 00 05:39:49.216 READ DMA EXT
25 d0 08 ff ff ff 4f 00 05:39:49.216 READ DMA EXT
Error 1 occurred at disk power-on lifetime: 24708 hours (1029 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 d0 f0 ff ff ff 4f 00 05:39:46.548 READ DMA EXT
25 d0 10 ff ff ff 4f 00 05:39:46.546 READ DMA EXT
25 d0 f0 ff ff ff 4f 00 05:39:46.542 READ DMA EXT
25 d0 10 ff ff ff 4f 00 05:39:46.541 READ DMA EXT
25 d0 f0 ff ff ff 4f 00 05:39:46.537 READ DMA EXT
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 41 Celsius
Power Cycle Min/Max Temperature: 40/42 Celsius
Lifetime Min/Max Temperature: 13/56 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 59 minutes
Min/Max recommended Temperature: 14/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (110)
Index Estimated Time Temperature Celsius
111 2015-10-22 06:21 40 *********************
112 2015-10-22 07:20 40 *********************
113 2015-10-22 08:19 40 *********************
114 2015-10-22 09:18 41 **********************
115 2015-10-22 10:17 42 ***********************
116 2015-10-22 11:16 43 ************************
117 2015-10-22 12:15 43 ************************
118 2015-10-22 13:14 44 *************************
119 2015-10-22 14:13 44 *************************
120 2015-10-22 15:12 ? -
121 2015-10-22 16:11 44 *************************
... ..( 3 skipped). .. *************************
125 2015-10-22 20:07 44 *************************
126 2015-10-22 21:06 43 ************************
127 2015-10-22 22:05 43 ************************
0 2015-10-22 23:04 43 ************************
1 2015-10-23 00:03 42 ***********************
2 2015-10-23 01:02 42 ***********************
3 2015-10-23 02:01 42 ***********************
4 2015-10-23 03:00 41 **********************
5 2015-10-23 03:59 41 **********************
6 2015-10-23 04:58 41 **********************
7 2015-10-23 05:57 40 *********************
8 2015-10-23 06:56 40 *********************
9 2015-10-23 07:55 41 **********************
10 2015-10-23 08:54 41 **********************
11 2015-10-23 09:53 41 **********************
12 2015-10-23 10:52 42 ***********************
13 2015-10-23 11:51 42 ***********************
14 2015-10-23 12:50 43 ************************
15 2015-10-23 13:49 43 ************************
16 2015-10-23 14:48 43 ************************
17 2015-10-23 15:47 44 *************************
... ..( 3 skipped). .. *************************
21 2015-10-23 19:43 44 *************************
22 2015-10-23 20:42 43 ************************
23 2015-10-23 21:41 43 ************************
24 2015-10-23 22:40 43 ************************
25 2015-10-23 23:39 42 ***********************
... ..( 3 skipped). .. ***********************
29 2015-10-24 03:35 42 ***********************
30 2015-10-24 04:34 41 **********************
... ..( 5 skipped). .. **********************
36 2015-10-24 10:28 41 **********************
37 2015-10-24 11:27 42 ***********************
38 2015-10-24 12:26 42 ***********************
39 2015-10-24 13:25 43 ************************
40 2015-10-24 14:24 43 ************************
41 2015-10-24 15:23 43 ************************
42 2015-10-24 16:22 44 *************************
43 2015-10-24 17:21 44 *************************
44 2015-10-24 18:20 43 ************************
45 2015-10-24 19:19 43 ************************
46 2015-10-24 20:18 42 ***********************
47 2015-10-24 21:17 42 ***********************
48 2015-10-24 22:16 42 ***********************
49 2015-10-24 23:15 41 **********************
50 2015-10-25 00:14 41 **********************
51 2015-10-25 01:13 40 *********************
52 2015-10-25 02:12 40 *********************
53 2015-10-25 03:11 40 *********************
54 2015-10-25 04:10 39 ********************
55 2015-10-25 05:09 39 ********************
56 2015-10-25 06:08 39 ********************
57 2015-10-25 07:07 40 *********************
58 2015-10-25 08:06 41 **********************
59 2015-10-25 09:05 41 **********************
60 2015-10-25 10:04 41 **********************
61 2015-10-25 11:03 42 ***********************
62 2015-10-25 12:02 43 ************************
... ..( 2 skipped). .. ************************
65 2015-10-25 14:59 43 ************************
66 2015-10-25 15:58 44 *************************
67 2015-10-25 16:57 44 *************************
68 2015-10-25 17:56 43 ************************
69 2015-10-25 18:55 43 ************************
70 2015-10-25 19:54 43 ************************
71 2015-10-25 20:53 42 ***********************
72 2015-10-25 21:52 42 ***********************
73 2015-10-25 22:51 41 **********************
74 2015-10-25 23:50 41 **********************
75 2015-10-26 00:49 41 **********************
76 2015-10-26 01:48 40 *********************
... ..( 3 skipped). .. *********************
80 2015-10-26 05:44 40 *********************
81 2015-10-26 06:43 41 **********************
82 2015-10-26 07:42 40 *********************
83 2015-10-26 08:41 40 *********************
84 2015-10-26 09:40 41 **********************
85 2015-10-26 10:39 42 ***********************
86 2015-10-26 11:38 42 ***********************
87 2015-10-26 12:37 43 ************************
88 2015-10-26 13:36 44 *************************
89 2015-10-26 14:35 44 *************************
90 2015-10-26 15:34 45 **************************
... ..( 2 skipped). .. **************************
93 2015-10-26 18:31 45 **************************
94 2015-10-26 19:30 44 *************************
... ..( 2 skipped). .. *************************
97 2015-10-26 22:27 44 *************************
98 2015-10-26 23:26 43 ************************
99 2015-10-27 00:25 43 ************************
100 2015-10-27 01:24 42 ***********************
... ..( 2 skipped). .. ***********************
103 2015-10-27 04:21 42 ***********************
104 2015-10-27 05:20 41 **********************
105 2015-10-27 06:19 ? -
106 2015-10-27 07:18 41 **********************
... ..( 2 skipped). .. **********************
109 2015-10-27 10:15 41 **********************
110 2015-10-27 11:14 42 ***********************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands require SAT ATA PASS-THROUGH (16)
Read SATA Phy Event Counters failed
More information about the users
mailing list