[Fedora] - No GUI after install bumblebee on Fedora 23
Earl A Ramirez
earlaramirez at gmail.com
Thu Jan 7 15:11:02 UTC 2016
Dear All,
I have a ASUS laptop with NVIDIA Optimus technology, therefore, I used the
Fedora documentation [0] to install bumbleeble using the third party
managed driver to install NVIDIA. After the installation I am no longer
seeing the NVIDIA when I use 'lspci | grep VGA'; however, when I use 'lspci
| egrep 'VGA|3D'' I can see the NVIDIA video card.
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Device 191b (rev 06)
$ lspci | egrep 'VGA|3D'
00:02.0 VGA compatible controller: Intel Corporation Device 191b (rev 06)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 960M] (rev a2)
Also I no longer see the vgaswitcheroo under /sys/kernel/debug/. When I try
to boot with the kernel that NVIDIA was build on; the laptop locks up just
before the GUI and you will hear the fans blowing and the only way around
it is to power the laptop down. I have tried booting into that kernel with
different kernel parameters; E.g. nomodeset rd.driver.blacklist=nouveau and
even i915.preliminary_hw_support=1 and all options and combinations fails.
However when I boot from the kernel that NVIDIA was not compiled on I can
the the get a display that says "oops something went wrong, please try
again" and there is an option to log out, I can also switch to another
virtual console and have full access to the OS. I get the same behaviour
even if I use nomodeset; however, if I use i915.preliminary_hw_support=1 I
get the appropriate resolution.
Can anyone shed some light on how to get the GUI, with bumblebee or even
the Intel graphic drivers?
The packages that were installed are:
$ rpm -qa | egrep 'bumblebee|bbswitch|primus|VirtualGL'
primus-1.1.03282015-2.fc23.x86_64
bumblebee-nvidia-352.63-2.fc23.x86_64
bbswitch-dkms-0.8.0-2.fc23.x86_64
bumblebee-nonfree-release-1.2-1.noarch
VirtualGL-2.4-5.fc23.i686
bumblebee-release-1.2-1.noarch
primus-1.1.03282015-2.fc23.i686
VirtualGL-2.4-5.fc23.x86_64
bumblebee-3.2.1-9.fc23.x86_64
Below is the content of the Xorg.0.log:
[ 4.303]
X.Org X Server 1.18.0
Release Date: 2015-11-09
[ 4.303] X Protocol Version 11, Revision 0
[ 4.303] Build Operating System: 4.2.5-300.fc23.x86_64
[ 4.303] Current Operating System: Linux devlap-f23
4.2.3-300.fc23.x86_64 #1 SMP Mon Oct 5 15:42:54 UTC 2015 x86_64
[ 4.303] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.3-300.fc23.x86_64
root=/dev/mapper/dev--lap-root ro rd.lvm.lv=dev-lap/root rd.lvm.lv=dev-lap/swap
nouveau.modeset=0 rd.driver.blacklist=nouveau
[ 4.303] Build Date: 16 November 2015 10:08:25AM
[ 4.303] Build ID: xorg-x11-server 1.18.0-2.fc23
[ 4.303] Current version of pixman: 0.33.6
[ 4.303] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.303] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.303] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 5
23:28:56 2016
[ 4.305] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4.305] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.306] (==) No Layout section. Using the first Screen section.
[ 4.306] (==) No screen section available. Using defaults.
[ 4.306] (**) |-->Screen "Default Screen Section" (0)
[ 4.306] (**) | |-->Monitor "<default monitor>"
[ 4.306] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.306] (==) Automatically adding devices
[ 4.306] (==) Automatically enabling devices
[ 4.306] (==) Automatically adding GPU devices
[ 4.306] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 4.306] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 4.306] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 4.306] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.306] (II) Loader magic: 0x81cde0
[ 4.306] (II) Module ABI versions:
[ 4.306] X.Org ANSI C Emulation: 0.4
[ 4.306] X.Org Video Driver: 20.0
[ 4.306] X.Org XInput driver : 22.1
[ 4.306] X.Org Server Extension : 9.0
[ 4.308] (++) using VT number 1
[ 4.310] (II) systemd-logind: took control of session
/org/freedesktop/login1/session/c2
[ 4.312] (--) PCI:*(0:0:2:0) 8086:191b:1043:1c5d rev 6, Mem @
0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @
0x????????/131072
[ 4.312] (--) PCI: (0:1:0:0) 10de:139b:1043:1c5d rev 162, Mem @
0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @
0x0000e000/128, BIOS @ 0x????????/524288
[ 4.312] (II) LoadModule: "glx"
[ 4.313] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 4.334] (II) Module glx: vendor="NVIDIA Corporation"
[ 4.334] compiled for 4.0.2, module version = 1.0.0
[ 4.334] Module class: X.Org Server Extension
[ 4.335] (II) NVIDIA GLX Module 358.16 Mon Nov 16 18:54:01 PST 2015
[ 4.335] (==) Matched intel as autoconfigured driver 0
[ 4.335] (==) Matched modesetting as autoconfigured driver 1
[ 4.335] (==) Matched fbdev as autoconfigured driver 2
[ 4.335] (==) Matched vesa as autoconfigured driver 3
[ 4.335] (==) Assigned the driver to the xf86ConfigLayout
[ 4.335] (II) LoadModule: "intel"
[ 4.335] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 4.338] (II) Module intel: vendor="X.Org Foundation"
[ 4.338] compiled for 1.17.99.901, module version = 2.99.917
[ 4.338] Module class: X.Org Video Driver
[ 4.338] ABI class: X.Org Video Driver, version 20.0
[ 4.338] (II) LoadModule: "modesetting"
[ 4.338] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 4.339] (II) Module modesetting: vendor="X.Org Foundation"
[ 4.339] compiled for 1.18.0, module version = 1.18.0
[ 4.339] Module class: X.Org Video Driver
[ 4.339] ABI class: X.Org Video Driver, version 20.0
[ 4.339] (II) LoadModule: "fbdev"
[ 4.339] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 4.339] (II) Module fbdev: vendor="X.Org Foundation"
[ 4.339] compiled for 1.17.99.901, module version = 0.4.3
[ 4.339] Module class: X.Org Video Driver
[ 4.339] ABI class: X.Org Video Driver, version 20.0
[ 4.339] (II) LoadModule: "vesa"
[ 4.339] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 4.340] (II) Module vesa: vendor="X.Org Foundation"
[ 4.340] compiled for 1.17.99.901, module version = 2.3.2
[ 4.340] Module class: X.Org Video Driver
[ 4.340] ABI class: X.Org Video Driver, version 20.0
[ 4.340] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 4.340] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 4.340] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 4.340] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200,
6200, P6300
[ 4.340] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4.340] (II) FBDEV: driver for framebuffer: fbdev
[ 4.340] (II) VESA: driver for VESA chipsets: vesa
[ 4.346] (EE) open /dev/dri/card0: No such file or directory
[ 4.346] (WW) Falling back to old probe method for modesetting
[ 4.346] (EE) open /dev/dri/card0: No such file or directory
[ 4.346] (II) Loading sub module "fbdevhw"
[ 4.346] (II) LoadModule: "fbdevhw"
[ 4.347] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 4.347] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 4.347] compiled for 1.18.0, module version = 0.0.2
[ 4.347] ABI class: X.Org Video Driver, version 20.0
[ 4.347] (**) FBDEV(1): claimed PCI slot 0 at 0:2:0
[ 4.347] (II) FBDEV(1): using default device
[ 4.347] (WW) Falling back to old probe method for vesa
[ 4.347] (EE) Screen 0 deleted because of no matching config section.
[ 4.347] (II) UnloadModule: "modesetting"
[ 4.347] (II) FBDEV(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.347] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[ 4.347] (==) FBDEV(0): RGB weight 888
[ 4.347] (==) FBDEV(0): Default visual is TrueColor
[ 4.347] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.347] (II) FBDEV(0): hardware: EFI VGA (video memory: 1876kB)
[ 4.347] (II) FBDEV(0): checking modes against framebuffer device...
[ 4.347] (II) FBDEV(0): checking modes against monitor...
[ 4.347] (--) FBDEV(0): Virtual size is 800x600 (pitch 800)
[ 4.347] (**) FBDEV(0): Built-in mode "current": 48.0 MHz, 46.9 kHz,
75.1 Hz
[ 4.347] (II) FBDEV(0): Modeline "current"x0.0 48.00 800 832 928
1024 600 604 608 624 -hsync -vsync -csync (46.9 kHz b)
[ 4.347] (==) FBDEV(0): DPI set to (96, 96)
[ 4.347] (II) Loading sub module "fb"
[ 4.347] (II) LoadModule: "fb"
[ 4.348] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 4.348] (II) Module fb: vendor="X.Org Foundation"
[ 4.348] compiled for 1.18.0, module version = 1.0.0
[ 4.348] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.348] (**) FBDEV(0): using shadow framebuffer
[ 4.348] (II) Loading sub module "shadow"
[ 4.348] (II) LoadModule: "shadow"
[ 4.348] (II) Loading /usr/lib64/xorg/modules/libshadow.so
[ 4.349] (II) Module shadow: vendor="X.Org Foundation"
[ 4.349] compiled for 1.18.0, module version = 1.1.0
[ 4.349] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.349] (II) UnloadModule: "vesa"
[ 4.349] (II) Unloading vesa
[ 4.349] (==) Depth 24 pixmap format is 32 bpp
[ 4.349] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking
not supported by kernel - disabling)
[ 4.350] (==) FBDEV(0): Backing store enabled
[ 4.351] (==) FBDEV(0): DPMS enabled
[ 4.351] (==) RandR enabled
[ 4.355] (II) SELinux: Disabled by boolean
[ 4.356] (EE) Failed to initialize GLX extension (Compatible NVIDIA X
driver not found)
[ 4.391] (II) config/udev: Adding input device Power Button
(/dev/input/event2)
[ 4.391] (**) Power Button: Applying InputClass "evdev keyboard
catchall"
[ 4.391] (**) Power Button: Applying InputClass "libinput keyboard
catchall"
[ 4.391] (**) Power Button: Applying InputClass "system-keyboard"
[ 4.391] (II) LoadModule: "libinput"
[ 4.391] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[ 4.393] (II) Module libinput: vendor="X.Org Foundation"
[ 4.393] compiled for 1.18.0, module version = 0.16.0
[ 4.393] Module class: X.Org XInput Driver
[ 4.393] ABI class: X.Org XInput driver, version 22.1
[ 4.395] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 14
paused 0
[ 4.395] (II) Using input driver 'libinput' for 'Power Button'
[ 4.395] (**) Power Button: always reports core events
[ 4.395] (**) Option "Device" "/dev/input/event2"
[ 4.395] (**) Option "_source" "server/udev"
[ 4.395] (II) input device 'Power Button', /dev/input/event2 is tagged
by udev as: Keyboard
[ 4.395] (II) input device 'Power Button', /dev/input/event2 is a
keyboard
[ 4.395] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 4.395] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 6)
[ 4.395] (**) Option "xkb_layout" "us"
[ 4.396] (II) input device 'Power Button', /dev/input/event2 is tagged
by udev as: Keyboard
[ 4.396] (II) input device 'Power Button', /dev/input/event2 is a
keyboard
[ 4.396] (II) config/udev: Adding input device Lid Switch
(/dev/input/event0)
[ 4.396] (II) No input driver specified, ignoring this device.
[ 4.396] (II) This device may have been added with another device file.
[ 4.397] (II) config/udev: Adding input device Sleep Button
(/dev/input/event1)
[ 4.397] (**) Sleep Button: Applying InputClass "evdev keyboard
catchall"
[ 4.397] (**) Sleep Button: Applying InputClass "libinput keyboard
catchall"
[ 4.397] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 4.397] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 17
paused 0
[ 4.397] (II) Using input driver 'libinput' for 'Sleep Button'
[ 4.397] (**) Sleep Button: always reports core events
[ 4.397] (**) Option "Device" "/dev/input/event1"
[ 4.397] (**) Option "_source" "server/udev"
[ 4.398] (II) input device 'Sleep Button', /dev/input/event1 is tagged
by udev as: Keyboard
[ 4.398] (II) input device 'Sleep Button', /dev/input/event1 is a
keyboard
[ 4.398] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 4.398] (II) XINPUT: Adding extended input device "Sleep Button"
(type: KEYBOARD, id 7)
[ 4.398] (**) Option "xkb_layout" "us"
[ 4.398] (II) input device 'Sleep Button', /dev/input/event1 is tagged
by udev as: Keyboard
[ 4.398] (II) input device 'Sleep Button', /dev/input/event1 is a
keyboard
[ 4.399] (II) config/udev: Adding input device USB2.0 HD UVC WebCam
(/dev/input/event6)
[ 4.399] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard
catchall"
[ 4.399] (**) USB2.0 HD UVC WebCam: Applying InputClass "libinput
keyboard catchall"
[ 4.399] (**) USB2.0 HD UVC WebCam: Applying InputClass
"system-keyboard"
[ 4.399] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 18
paused 0
[ 4.399] (II) Using input driver 'libinput' for 'USB2.0 HD UVC WebCam'
[ 4.399] (**) USB2.0 HD UVC WebCam: always reports core events
[ 4.399] (**) Option "Device" "/dev/input/event6"
[ 4.399] (**) Option "_source" "server/udev"
[ 4.400] (II) input device 'USB2.0 HD UVC WebCam', /dev/input/event6 is
tagged by udev as: Keyboard
[ 4.400] (II) input device 'USB2.0 HD UVC WebCam', /dev/input/event6 is
a keyboard
[ 4.400] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input5/event6"
[ 4.400] (II) XINPUT: Adding extended input device "USB2.0 HD UVC
WebCam" (type: KEYBOARD, id 8)
[ 4.400] (**) Option "xkb_layout" "us"
[ 4.400] (II) input device 'USB2.0 HD UVC WebCam', /dev/input/event6 is
tagged by udev as: Keyboard
[ 4.400] (II) input device 'USB2.0 HD UVC WebCam', /dev/input/event6 is
a keyboard
[ 4.401] (II) config/udev: Adding input device Logitech Lenovo USB
Optical Mouse (/dev/input/event4)
[ 4.401] (**) Logitech Lenovo USB Optical Mouse: Applying InputClass
"evdev pointer catchall"
[ 4.401] (**) Logitech Lenovo USB Optical Mouse: Applying InputClass
"libinput pointer catchall"
[ 4.453] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 19
paused 0
[ 4.453] (II) Using input driver 'libinput' for 'Logitech Lenovo USB
Optical Mouse'
[ 4.453] (**) Logitech Lenovo USB Optical Mouse: always reports core
events
[ 4.453] (**) Option "Device" "/dev/input/event4"
[ 4.453] (**) Option "_source" "server/udev"
[ 4.453] (II) input device 'Logitech Lenovo USB Optical Mouse',
/dev/input/event4 is tagged by udev as: Mouse
[ 4.453] (II) input device 'Logitech Lenovo USB Optical Mouse',
/dev/input/event4 is a pointer caps
[ 4.453] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:17EF:6019.0001/input/input4/event4"
[ 4.453] (II) XINPUT: Adding extended input device "Logitech Lenovo USB
Optical Mouse" (type: MOUSE, id 9)
[ 4.454] (**) Option "AccelerationScheme" "none"
[ 4.454] (**) Logitech Lenovo USB Optical Mouse: (accel) selected
scheme none/0
[ 4.454] (**) Logitech Lenovo USB Optical Mouse: (accel) acceleration
factor: 2.000
[ 4.454] (**) Logitech Lenovo USB Optical Mouse: (accel) acceleration
threshold: 4
[ 4.454] (II) input device 'Logitech Lenovo USB Optical Mouse',
/dev/input/event4 is tagged by udev as: Mouse
[ 4.454] (II) input device 'Logitech Lenovo USB Optical Mouse',
/dev/input/event4 is a pointer caps
[ 4.455] (II) config/udev: Adding input device Logitech Lenovo USB
Optical Mouse (/dev/input/mouse0)
[ 4.455] (II) No input driver specified, ignoring this device.
[ 4.455] (II) This device may have been added with another device file.
[ 4.455] (II) config/udev: Adding input device HDA Intel PCH Mic
(/dev/input/event7)
[ 4.455] (II) No input driver specified, ignoring this device.
[ 4.455] (II) This device may have been added with another device file.
[ 4.455] (II) config/udev: Adding input device HDA Intel PCH Headphone
(/dev/input/event8)
[ 4.455] (II) No input driver specified, ignoring this device.
[ 4.455] (II) This device may have been added with another device file.
[ 4.456] (II) config/udev: Adding input device HDA Intel PCH
HDMI/DP,pcm=3 (/dev/input/event9)
[ 4.456] (II) No input driver specified, ignoring this device.
[ 4.456] (II) This device may have been added with another device file.
[ 4.456] (II) config/udev: Adding input device Asus WMI hotkeys
(/dev/input/event5)
[ 4.456] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard
catchall"
[ 4.456] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard
catchall"
[ 4.456] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard"
[ 4.457] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 20
paused 0
[ 4.457] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[ 4.457] (**) Asus WMI hotkeys: always reports core events
[ 4.457] (**) Option "Device" "/dev/input/event5"
[ 4.457] (**) Option "_source" "server/udev"
[ 4.457] (II) input device 'Asus WMI hotkeys', /dev/input/event5 is
tagged by udev as: Keyboard
[ 4.457] (II) input device 'Asus WMI hotkeys', /dev/input/event5 is a
keyboard
[ 4.457] (**) Option "config_info"
"udev:/sys/devices/platform/asus-nb-wmi/input/input6/event5"
[ 4.457] (II) XINPUT: Adding extended input device "Asus WMI hotkeys"
(type: KEYBOARD, id 10)
[ 4.457] (**) Option "xkb_layout" "us"
[ 4.458] (II) input device 'Asus WMI hotkeys', /dev/input/event5 is
tagged by udev as: Keyboard
[ 4.458] (II) input device 'Asus WMI hotkeys', /dev/input/event5 is a
keyboard
[ 4.458] (II) config/udev: Adding input device AT Translated Set 2
keyboard (/dev/input/event3)
[ 4.458] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev
keyboard catchall"
[ 4.458] (**) AT Translated Set 2 keyboard: Applying InputClass
"libinput keyboard catchall"
[ 4.458] (**) AT Translated Set 2 keyboard: Applying InputClass
"system-keyboard"
[ 4.459] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 21
paused 0
[ 4.459] (II) Using input driver 'libinput' for 'AT Translated Set 2
keyboard'
[ 4.459] (**) AT Translated Set 2 keyboard: always reports core events
[ 4.459] (**) Option "Device" "/dev/input/event3"
[ 4.459] (**) Option "_source" "server/udev"
[ 4.459] (II) input device 'AT Translated Set 2 keyboard',
/dev/input/event3 is tagged by udev as: Keyboard
[ 4.459] (II) input device 'AT Translated Set 2 keyboard',
/dev/input/event3 is a keyboard
[ 4.459] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 4.459] (II) XINPUT: Adding extended input device "AT Translated Set 2
keyboard" (type: KEYBOARD, id 11)
[ 4.459] (**) Option "xkb_layout" "us"
[ 4.460] (II) input device 'AT Translated Set 2 keyboard',
/dev/input/event3 is tagged by udev as: Keyboard
[ 4.460] (II) input device 'AT Translated Set 2 keyboard',
/dev/input/event3 is a keyboard
[ 16.612] (**) Option "fd" "14"
[ 16.613] (**) Option "fd" "17"
[ 16.613] (**) Option "fd" "18"
[ 16.613] (**) Option "fd" "19"
[ 16.613] (**) Option "fd" "20"
[ 16.613] (**) Option "fd" "21"
[ 16.617] (II) systemd-logind: got pause for 13:65
[ 16.617] (II) systemd-logind: got pause for 13:66
[ 16.617] (II) systemd-logind: got pause for 13:69
[ 16.617] (II) systemd-logind: got pause for 13:67
[ 16.617] (II) systemd-logind: got pause for 13:68
[ 16.617] (II) systemd-logind: got pause for 13:70
[ 17.953] (II) UnloadModule: "libinput"
[ 17.954] (II) systemd-logind: releasing fd for 13:67
[ 17.974] (II) UnloadModule: "libinput"
[ 17.974] (II) systemd-logind: releasing fd for 13:69
[ 18.053] (II) UnloadModule: "libinput"
[ 18.053] (II) systemd-logind: releasing fd for 13:68
[ 18.095] (II) UnloadModule: "libinput"
[ 18.095] (II) systemd-logind: releasing fd for 13:70
[ 18.131] (II) UnloadModule: "libinput"
[ 18.131] (II) systemd-logind: releasing fd for 13:65
[ 18.155] (II) UnloadModule: "libinput"
[ 18.155] (II) systemd-logind: releasing fd for 13:66
[ 18.174] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[ 18.174] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[ 18.174] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[ 18.174] (II) Server terminated successfully (0). Closing log file.
Thanks in advance
[0] https://fedoraproject.org/wiki/Bumblebee
--
Kind Regards
Earl Ramirez
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.fedoraproject.org/pipermail/users/attachments/20160108/faec31aa/attachment.html>
More information about the users
mailing list