[fedora-virt] Problem installing Fedora 20 cloud image
Eric V. Smith
eric at trueblade.com
Tue Mar 18 20:05:42 UTC 2014
I want to use the stock Fedora cloud image,
Fedora-x86_64-20-20131211.1-sda.raw. Dom0 is also Fedora 20, running the
Xen kernel. I've yum update'd everything.
I have downloaded a local copy of the .raw file.
I've created a user-data file containing:
==================
#cloud-config
password: fedora
chpasswd: {expire: False}
ssh_pwauth: True
==================
And a meta-data file containing:
==================
instance-id: build-f20; local-hostname: build-f20
==================
I create an iso image of these with:
# genisoimage -output build-f20-cidata.iso -volid cidata -joliet
-rational-rock user-data meta-data
Then I try to install the image with:
# virt-install --import --name build-f20 --ram 512 --vcpus 1 --disk
path=./Fedora-x86_64-20-20131211.1-sda.raw,bus=scsi --disk
build-f20-cidata.iso,device=cdrom,bus=scsi --network
bridge=virbr0,model=virtio --graphics=none
After a number of output lines, I get the error:
[ 1.268756] VFS: Cannot open root device
"UUID=e78f2b16-8836-4e6a-9e5e-fdc6c9d3cfc3" or unknown-block(0,0): error -6
(Full --debug output at the end of the email).
I've verified that this error comes from the UUID that's in
/boot/extlinux/extlinux.conf, but everything looks correct there. I've
verified that this is the volume's UUID with
# guestfish -a Fedora-x86_64-20-20131211.1-sda.raw << EOF
> run
> vfs-uuid /dev/sda1
> EOF
e78f2b16-8836-4e6a-9e5e-fdc6c9d3cfc3
If I don't include the iso image, then after the VFS error line I get:
Please append a correct "root=" boot option; here are the available
partitions:
with no partitions listed.
I'm at a loss as to what to try next. I suspect it has something to do
with the /dev/sda1 vs. sda in the XML (which follows in the debug
output), but I'm not sure what to do about it. Any suggestions?
I've been unable to find any documentation on how to use the stock F20
image while running Dom0 as F20. Any pointers appreciated.
Thanks.
Eric.
# virt-install --import --name build-f20 --ram 512 --vcpus 1 --disk
path=./Fedora-x86_64-20-20131211.1-sda.raw,bus=scsi --disk
build-f20-cidata.iso,device=cdrom,bus=scsi --network
bridge=virbr0,model=virtio --graphics=none --debug
[Tue, 18 Mar 2014 15:55:34 virt-install 25981] DEBUG (cli:187) Launched
with command line: /usr/share/virt-manager/virt-install --import --name
build-f20 --ram 512 --vcpus 1 --disk
path=./Fedora-x86_64-20-20131211.1-sda.raw,bus=scsi --disk
build-f20-cidata.iso,device=cdrom,bus=scsi --network
bridge=virbr0,model=virtio --graphics=none --debug
[Tue, 18 Mar 2014 15:55:34 virt-install 25981] DEBUG (cli:195)
Requesting libvirt URI default
[Tue, 18 Mar 2014 15:55:34 virt-install 25981] DEBUG (cli:199) Received
libvirt URI xen:///
[Tue, 18 Mar 2014 15:55:34 virt-install 25981] DEBUG (virt-install:193)
Requesting virt method 'default', hv type 'default'.
[Tue, 18 Mar 2014 15:55:34 virt-install 25981] DEBUG (virt-install:432)
Received virt method 'xen'
[Tue, 18 Mar 2014 15:55:34 virt-install 25981] DEBUG (virt-install:433)
Hypervisor name is 'xen'
[Tue, 18 Mar 2014 15:55:34 virt-install 25981] WARNING
(virt-install:343) CDROM media does not print to the text console by
default, so you likely will not see text install output. You might want
to use --location.
[Tue, 18 Mar 2014 15:55:34 virt-install 25981] DEBUG (virt-install:551)
Guest.has_install_phase: False
Starting install...
[Tue, 18 Mar 2014 15:55:34 virt-install 25981] DEBUG (guest:446)
Generated install XML: None required
[Tue, 18 Mar 2014 15:55:34 virt-install 25981] DEBUG (guest:447)
Generated boot XML:
<domain type="xen">
<name>build-f20</name>
<uuid>c8abc5af-d6e7-4710-bb69-869cbc59872a</uuid>
<memory>524288</memory>
<currentMemory>524288</currentMemory>
<vcpu>1</vcpu>
<bootloader>/usr/bin/pygrub</bootloader>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<devices>
<disk type="file" device="disk">
<source file="/root/Fedora-x86_64-20-20131211.1-sda.raw"/>
<target dev="sda" bus="scsi"/>
</disk>
<disk type="file" device="cdrom">
<source file="/root/build-f20-cidata.iso"/>
<target dev="sdb" bus="scsi"/>
<readonly/>
</disk>
<interface type="bridge">
<source bridge="virbr0"/>
<mac address="00:16:3e:df:98:ef"/>
<model type="virtio"/>
</interface>
<input type="mouse" bus="xen"/>
</devices>
</domain>
Creating domain...
| 0 B 00:00:01
[Tue, 18 Mar 2014 15:55:36 virt-install 25981] DEBUG (guest:477) XML
fetched from libvirt object:
<domain type='xen' id='55'>
<name>build-f20</name>
<uuid>c8abc5af-d6e7-4710-bb69-869cbc59872a</uuid>
<memory unit='KiB'>524288</memory>
<currentMemory unit='KiB'>524288</currentMemory>
<vcpu placement='static'>1</vcpu>
<bootloader>/usr/bin/pygrub</bootloader>
<os>
<type>linux</type>
</os>
<clock offset='utc' adjustment='reset'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<devices>
<disk type='file' device='disk'>
<driver name='file'/>
<source file='/root/Fedora-x86_64-20-20131211.1-sda.raw'/>
<target dev='sda' bus='scsi'/>
</disk>
<disk type='file' device='cdrom'>
<driver name='file'/>
<source file='/root/build-f20-cidata.iso'/>
<target dev='sdb' bus='scsi'/>
<readonly/>
</disk>
<interface type='bridge'>
<mac address='00:16:3e:df:98:ef'/>
<source bridge='virbr0'/>
<script path='/etc/xen/scripts/vif-bridge'/>
<target dev='vif55.0'/>
<model type='virtio'/>
</interface>
<console type='pty' tty='/dev/pts/4'>
<source path='/dev/pts/4'/>
<target type='xen' port='0'/>
</console>
</devices>
</domain>
[Tue, 18 Mar 2014 15:55:36 virt-install 25981] DEBUG (cli:397)
Connecting to text console
[Tue, 18 Mar 2014 15:55:36 virt-install 25981] DEBUG (cli:344) Running:
/usr/bin/virsh --connect xen:/// console build-f20
Connected to domain build-f20
Escape character is ^]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11.10-301.fc20.x86_64
(mockbuild at bkernel01.phx2.fedoraproject.org) (gcc version 4.8.2 20131017
(Red Hat 4.8.2-1) (GCC) ) #1 SMP Thu Dec 5 14:01:17 UTC 2013
[ 0.000000] Command line: ro
root=UUID=e78f2b16-8836-4e6a-9e5e-fdc6c9d3cfc3 console=tty1
console=ttyS0,115200n8
[ 0.000000] ACPI in unprivileged domain disabled
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x00000000207fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI not present or invalid.
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x20800 max_arch_pfn = 0x400000000
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x1fe00000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1fdfffff]
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
[ 0.000000] init_memory_mapping: [mem 0x20000000-0x207fffff]
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000207fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x207fffff]
[ 0.000000] NODE_DATA [mem 0x1ff02000-0x1ff15fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0x207fffff]
[ 0.000000] SFI: Simple Firmware Interface v0.81
http://simplefirmware.org
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] No local APIC present
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] e820: [mem 0x20800000-0xffffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.3.2 (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128
nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88001f800000 s85568
r8192 d20928 u2097152
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 130922
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: ro
root=UUID=e78f2b16-8836-4e6a-9e5e-fdc6c9d3cfc3 console=tty1
console=ttyS0,115200n8
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 494892K/532092K available (6493K kernel code,
990K rwdata, 2864K rodata, 1424K init, 1544K bss, 37200K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:8448 nr_irqs:256 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [hvc0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 2621440 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] tsc: Detected 3400.144 MHz processor
[ 0.001000] Calibrating delay loop (skipped), value calculated using
timer frequency.. 6800.28 BogoMIPS (lpj=3400144)
[ 0.001000] pid_max: default: 32768 minimum: 301
[ 0.001000] Security Framework initialized
[ 0.001000] SELinux: Initializing.
[ 0.001000] Dentry cache hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.001000] Inode-cache hash table entries: 32768 (order: 6, 262144
bytes)
[ 0.001000] Mount-cache hash table entries: 256
[ 0.001000] Initializing cgroup subsys memory
[ 0.001000] Initializing cgroup subsys devices
[ 0.001000] Initializing cgroup subsys freezer
[ 0.001000] Initializing cgroup subsys net_cls
[ 0.001010] Initializing cgroup subsys blkio
[ 0.001046] Initializing cgroup subsys perf_event
[ 0.001090] Initializing cgroup subsys hugetlb
[ 0.001177] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.001177] ENERGY_PERF_BIAS: View and update with
x86_energy_perf_policy(8)
[ 0.001289] CPU: Physical Processor ID: 0
[ 0.001328] CPU: Processor Core ID: 0
[ 0.001631] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.001631] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.001631] tlb_flushall_shift: 1
[ 0.030632] Freeing SMP alternatives memory: 24K (ffffffff81e5d000 -
ffffffff81e63000)
[ 0.032322] ftrace: allocating 25129 entries in 99 pages
[ 0.036101] Performance Events: unsupported p6 CPU model 58 no PMU
driver, software events only.
[ 0.036902] Brought up 1 CPUs
[ 0.036953] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.037005] devtmpfs: initialized
[ 0.037558] atomic64 test passed for x86-64 platform with CX8 and
with SSE
[ 0.037624] xen:grant_table: Grant tables using version 2 layout
[ 0.037675] Grant table initialized
[ 0.056717] RTC time: 165:165:165, date: 165/165/65
[ 0.056820] NET: Registered protocol family 16
[ 0.057339] PCI: setting up Xen PCI frontend stub
[ 0.057796] bio: create slab <bio-0> at 0
[ 0.057886] ACPI: Interpreter disabled.
[ 0.057917] xen:balloon: Initialising balloon driver
[ 0.058023] xen_balloon: Initialising balloon driver
[ 0.058084] vgaarb: loaded
[ 0.058142] SCSI subsystem initialized
[ 0.058240] usbcore: registered new interface driver usbfs
[ 0.058290] usbcore: registered new interface driver hub
[ 0.058352] usbcore: registered new device driver usb
[ 0.058442] PCI: System does not support PCI
[ 0.058483] PCI: System does not support PCI
[ 0.059051] NetLabel: Initializing
[ 0.059077] NetLabel: domain hash size = 128
[ 0.059107] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.059149] NetLabel: unlabeled traffic allowed by default
[ 0.059212] Switched to clocksource xen
[ 0.061818] pnp: PnP ACPI: disabled
[ 0.062600] NET: Registered protocol family 2
[ 0.062711] TCP established hash table entries: 4096 (order: 4, 65536
bytes)
[ 0.062778] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.062833] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.062884] TCP: reno registered
[ 0.062910] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.062953] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.063024] NET: Registered protocol family 1
[ 0.063111] platform rtc_cmos: registered platform RTC device (no PNP
device found)
[ 0.182976] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 0.183175] Initialise system trusted keyring
[ 0.183239] audit: initializing netlink socket (disabled)
[ 0.183289] type=2000 audit(1395172536.673:1): initialized
[ 0.197775] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.198334] zbud: loaded
[ 0.198457] VFS: Disk quotas dquot_6.5.2
[ 0.198522] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.198782] msgmni has been set to 966
[ 0.198854] Key type big_key registered
[ 0.199217] alg: No test for stdrng (krng)
[ 0.199256] NET: Registered protocol family 38
[ 0.199297] Key type asymmetric registered
[ 0.199334] Asymmetric key parser 'x509' registered
[ 0.199401] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 252)
[ 0.199476] io scheduler noop registered
[ 0.199509] io scheduler deadline registered
[ 0.199570] io scheduler cfq registered (default)
[ 0.199656] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.199708] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.199940] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.200181] Non-volatile memory driver v1.3
[ 0.200214] Linux agpgart interface v0.103
[ 0.200323] libphy: Fixed MDIO Bus: probed
[ 0.200392] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.200441] ehci-pci: EHCI PCI platform driver
[ 0.200486] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.200537] ohci-pci: OHCI PCI platform driver
[ 0.200583] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.200656] usbcore: registered new interface driver usbserial
[ 0.200703] usbcore: registered new interface driver usbserial_generic
[ 0.200752] usbserial: USB Serial support registered for generic
[ 0.200801] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.208821] mousedev: PS/2 mouse device common for all mice
[ 1.268983] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.269076] rtc_cmos: probe of rtc_cmos failed with error -38
[ 1.269178] device-mapper: uevent: version 1.0.3
[ 1.269264] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26)
initialised: dm-devel at redhat.com
[ 1.269355] Intel P-state driver initializing.
[ 1.269424] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.269525] usbcore: registered new interface driver usbhid
[ 1.269567] usbhid: USB HID core driver
[ 1.269619] drop_monitor: Initializing network drop monitor service
[ 1.269743] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.269810] TCP: cubic registered
[ 1.269840] Initializing XFRM netlink socket
[ 1.269942] NET: Registered protocol family 10
[ 1.270100] mip6: Mobile IPv6
[ 1.270126] NET: Registered protocol family 17
[ 1.270235] Loading compiled-in X.509 certificates
[ 1.270831] Loaded X.509 cert 'Fedora kernel signing key:
03591dc57a690741401a1c202e2b3d9f4fed2a0e'
[ 1.270912] registered taskstats version 1
[ 1.270965] xenbus_probe_frontend: Device with no driver: device/vbd/2048
[ 1.271019] xenbus_probe_frontend: Device with no driver: device/vbd/2064
[ 1.271100] xenbus_probe_frontend: Device with no driver: device/vif/0
[ 1.271178] Magic number: 1:252:3141
[ 1.271222] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.271323] md: Waiting for all devices to be available before autodetect
[ 1.271373] md: If you don't use raid, use raid=noautodetect
[ 1.271504] md: Autodetecting RAID arrays.
[ 1.271536] md: Scanned 0 and added 0 devices.
[ 1.271576] md: autorun ...
[ 1.271604] md: ... autorun DONE.
[ 1.271671] VFS: Cannot open root device
"UUID=e78f2b16-8836-4e6a-9e5e-fdc6c9d3cfc3" or unknown-block(0,0): error -6
Domain creation completed. You can restart your domain by running:
virsh --connect xen:/// start build-f20
#
More information about the virt
mailing list