[fedora-arm] F20 on Mirabox

[Brian Kambach]

Thanks Peter.  F21 does work much more easily, although I still had to do the DTB appending thing.

Thanks,
Brian

-----Original Message-----
From: Peter Robinson [mailto:pbrobinson at gmail.com]
Sent: Friday, October 31, 2014 7:02 AM
To: Brian Kambach
Cc: arm at lists.fedoraproject.org
Subject: Re: [fedora-arm] F20 on Mirabox

On Thu, Oct 30, 2014 at 8:50 PM, Brian Kambach <bkambach at i-a-i.com> wrote:
> Does anyone have instructions for getting the stock F20 image to run
> on a Mirabox?
>
>
>
> I’m attempting to use the “Fedora-Minimal-armhfp-20-1-sda.raw.xz”
> image on an SD card.  I initially tried booting the image as-is, but
> it simply hung at “Starting kernel …”.  Following some old
> instructions in this mailing list for F19 from Jon Masters, I appended
> the “armada-370-mirabox.dtb” to the end of the uImage, which gets much further, but stops at:
>
> [  OK  ] Started Show Plymouth Boot Screen.
>
> [  OK  ] Reached target Paths.
>
> [  OK  ] Reached target Basic System.
>
> [  203.390737] dracut-initqueue[247]: Warning: Could not boot.
>
> [  203.432165] dracut-initqueue[247]: Warning: /dev/sdb3 does not
> exist
>
>
>
> So, it obviously can’t find the real root filesystem, but I don’t know
> how to remedy this.  Any ideas?

It's missing the usb driver from from the initrd. It may even have been missing the usb driver entirely in the F-20 GA release as I discovered both issues around the same time but I don't remember exactly when that was.

So to get it running on F-20 you'd likely need to pull in a newer kernel/dracut and regenerate the initrd. I've never run F-20 on my Mirabox but it's running F-21 really well so TBH I'd grab the latest
F-21 Beta RC and go with that as it's very solid on the Mirabox.

Peter



________________________________
This message and all attachments are PRIVATE, and contain information that is PROPRIETARY to Intelligent Automation, Inc. You are not authorized to transmit or otherwise disclose this message or any attachments to any third party whatsoever without the express written consent of Intelligent Automation, Inc. If you received this message in error or you are not willing to view this message or any attachments on a confidential basis, please immediately delete this email and any attachments and notify Intelligent Automation, Inc.