Remove ppc32 support
Josh Boyer
jwboyer at fedoraproject.org
Fri May 16 16:22:26 UTC 2014
The powerpc secondary arch team has disabled all ppc32 builds in koji for
F21 and beyond:
https://lists.fedoraproject.org/pipermail/ppc/2014-May/002801.html
There's little point in keeping support for ppc32 support in the kernel
package when it will never be built. This also removes the -smp variant
and with_smp* support, as that was only used on ppc32.
---
Makefile.config | 12 +---
config-powerpc32-generic | 180 -----------------------------------------------
config-powerpc32-smp | 3 -
filter-ppc.sh | 14 ----
kernel.spec | 72 +++----------------
5 files changed, 10 insertions(+), 271 deletions(-)
delete mode 100644 config-powerpc32-generic
delete mode 100644 config-powerpc32-smp
delete mode 100644 filter-ppc.sh
diff --git a/Makefile.config b/Makefile.config
index 3483968..63549f6 100644
--- a/Makefile.config
+++ b/Makefile.config
@@ -11,11 +11,10 @@ CONFIGFILES = \
$(CFG)-s390x.config \
$(CFG)-armv7hl.config $(CFG)-armv7hl-lpae.config \
$(CFG)-aarch64.config \
- $(CFG)-ppc.config $(CFG)-ppc-smp.config \
$(CFG)-ppc64.config $(CFG)-ppc64p7.config $(CFG)-ppc64-debug.config \
$(CFG)-ppc64le.config
-PLATFORMS = x86 x86_64 powerpc powerpc32 powerpc64 s390x arm arm64
+PLATFORMS = x86 x86_64 powerpc powerpc64 s390x arm arm64
TEMPFILES = $(addprefix temp-, $(addsuffix -generic, $(PLATFORMS)))
configs: $(CONFIGFILES)
@@ -81,9 +80,6 @@ temp-powerpc-generic: config-powerpc-generic temp-generic
temp-powerpc-debug-generic: config-powerpc-generic temp-debug-generic
perl merge.pl $^ > $@
-temp-powerpc32-generic: config-powerpc32-generic temp-powerpc-generic
- perl merge.pl $^ > $@
-
temp-powerpc64-generic: config-powerpc64 temp-powerpc-generic
perl merge.pl $^ > $@
@@ -134,9 +130,3 @@ $(CFG)-armv7hl-lpae.config: /dev/null temp-armv7-lpae
$(CFG)-aarch64.config: /dev/null temp-arm64
perl merge.pl $^ arm64 > $@
-
-$(CFG)-ppc.config: /dev/null temp-powerpc32-generic
- perl merge.pl $^ powerpc > $@
-
-$(CFG)-ppc-smp.config: config-powerpc32-smp temp-powerpc32-generic
- perl merge.pl $^ powerpc > $@
diff --git a/config-powerpc32-generic b/config-powerpc32-generic
deleted file mode 100644
index 10e02fb..0000000
--- a/config-powerpc32-generic
+++ /dev/null
@@ -1,180 +0,0 @@
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-# CONFIG_PPC64 is not set
-# CONFIG_RTAS_PROC is not set
-# CONFIG_PCMCIA_M8XX is not set
-# CONFIG_HOTPLUG_PCI is not set
-CONFIG_CPU_FREQ_PMAC=y
-CONFIG_PPC_CHRP=y
-CONFIG_PPC_PMAC=y
-# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PREP=y
-
-# CONFIG_PPC_MPC5200_SIMPLE is not set
-# CONFIG_SATA_FSL is not set
-# CONFIG_SATA_NV is not set
-
-# busted in .28git1
-# ERROR: "cacheable_memzero" [drivers/net/gianfar_driver.ko] undefined!
-# CONFIG_GIANFAR is not set
-# CONFIG_USB_EHCI_FSL is not set
-
-CONFIG_PMAC_APM_EMU=y
-CONFIG_PMAC_BACKLIGHT=y
-
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHMEM_START_BOOL is not set
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-# CONFIG_TASK_SIZE_BOOL is not set
-# CONFIG_KERNEL_START_BOOL is not set
-# CONFIG_PPC601_SYNC_FIX is not set
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_SCSI_MESH=m
-CONFIG_SCSI_MESH_SYNC_RATE=5
-CONFIG_SCSI_MESH_RESET_DELAY_MS=4000
-
-CONFIG_LBDAF=y
-
-CONFIG_SCSI_MAC53C94=m
-CONFIG_ADB_CUDA=y
-CONFIG_ADB_MACIO=y
-CONFIG_INPUT_ADBHID=y
-CONFIG_ADB_PMU_LED=y
-CONFIG_ADB_PMU_LED_IDE=y
-
-CONFIG_PMAC_MEDIABAY=y
-CONFIG_NET_VENDOR_APPLE=y
-CONFIG_BMAC=m
-CONFIG_MACE=m
-# CONFIG_MACE_AAUI_PORT is not set
-# CONFIG_MV643XX_ETH is not set
-CONFIG_I2C_HYDRA=m
-CONFIG_I2C_MPC=m
-CONFIG_THERM_WINDTUNNEL=m
-CONFIG_THERM_ADT746X=m
-# CONFIG_ANSLCD is not set
-
-CONFIG_FB_PLATINUM=y
-CONFIG_FB_VALKYRIE=y
-CONFIG_FB_CT65550=y
-# CONFIG_BDI_SWITCH is not set
-
-CONFIG_MAC_FLOPPY=m
-# CONFIG_BLK_DEV_FD is not set
-
-CONFIG_FB_ATY128=y
-CONFIG_FB_ATY=y
-CONFIG_FB_MATROX=y
-# CONFIG_KEXEC is not set
-
-# CONFIG_HVC_RTAS is not set
-
-# CONFIG_UDBG_RTAS_CONSOLE is not set
-CONFIG_BRIQ_PANEL=m
-
-# CONFIG_ATA_PIIX is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_MPC52xx is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_SERVERWORKS is not set
-
-# CONFIG_SERIAL_MPC52xx is not set
-# CONFIG_MPC5200_WDT is not set
-CONFIG_8xxx_WDT=m
-CONFIG_GEF_WDT=m
-
-# CONFIG_PPC_MPC5200_BUGFIX is not set
-# CONFIG_NET_VENDOR_FREESCALE is not set
-#CHECK: This may later become a tristate.
-CONFIG_MDIO_GPIO=m
-
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-
-# CONFIG_EMBEDDED6xx is not set
-
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
-
-# CONFIG_VIRQ_DEBUG is not set
-
-CONFIG_PPC_BESTCOMM_ATA=m
-CONFIG_PPC_BESTCOMM_FEC=m
-CONFIG_PPC_BESTCOMM_GEN_BD=m
-
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_PAGE_OFFSET_BOOL is not set
-# CONFIG_FB_FSL_DIU is not set
-CONFIG_IRQSTACKS=y
-CONFIG_VIRTUALIZATION=y
-
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_HTC_EGPIO is not set
-
-# CONFIG_TIFM_CORE is not set
-
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_CISS_SCSI_TAPE is not set
-
-# CONFIG_I2C_NFORCE2 is not set
-
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-
-# CONFIG_MEMSTICK is not set
-
-# CONFIG_IPMI_HANDLER is not set
-
-# PPC gets sad with debug alloc (bz 448598)
-# CONFIG_DEBUG_PAGEALLOC is not set
-
-CONFIG_CRYPTO_DEV_TALITOS=m
-
-# CONFIG_FSL_EMB_PERFMON is not set
-# CONFIG_MPC8272_ADS is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_EP8248E is not set
-# CONFIG_MPC830x_RDB is not set
-# CONFIG_MPC831x_RDB is not set
-# CONFIG_MPC832x_MDS is not set
-# CONFIG_MPC832x_RDB is not set
-# CONFIG_MPC834x_MDS is not set
-# CONFIG_MPC834x_ITX is not set
-# CONFIG_MPC836x_MDS is not set
-# CONFIG_MPC836x_RDK is not set
-# CONFIG_MPC837x_MDS is not set
-# CONFIG_MPC837x_RDB is not set
-# CONFIG_SBC834x is not set
-# CONFIG_ASP834x is not set
-# CONFIG_KMETER1 is not set
-# CONFIG_MPC8641_HPCN is not set
-# CONFIG_SBC8641D is not set
-# CONFIG_MPC8610_HPCD is not set
-# CONFIG_FSL_LBC is not set
-# CONFIG_MTD_NAND_FSL_UPM is not set
-
-# CONFIG_USB_MUSB_HDRC is not set
-
-# busted in 2.6.27
-# drivers/mtd/maps/sbc8240.c: In function 'init_sbc8240_mtd':
-# drivers/mtd/maps/sbc8240.c:172: warning: passing argument 1 of 'simple_map_init' from incompatible pointer type
-# drivers/mtd/maps/sbc8240.c:177: error: 'struct mtd_info' has no member named 'module'
-
-CONFIG_RCU_FANOUT=32
-
-CONFIG_KVM_BOOK3S_32=m
-
-# CONFIG_SCSI_QLA_ISCSI is not set
-
-CONFIG_BATTERY_PMU=m
-
diff --git a/config-powerpc32-smp b/config-powerpc32-smp
deleted file mode 100644
index 5dbe87f..0000000
--- a/config-powerpc32-smp
+++ /dev/null
@@ -1,3 +0,0 @@
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_NR_CPUS=4
-# CONFIG_BATTERY_PMU is not set
diff --git a/filter-ppc.sh b/filter-ppc.sh
deleted file mode 100644
index 8ff7a3b..0000000
--- a/filter-ppc.sh
+++ /dev/null
@@ -1,14 +0,0 @@
-#! /bin/bash
-
-# This is the ppc override file for the core/drivers package split. The
-# module directories listed here and in the generic list in filter-modules.sh
-# will be moved to the resulting kernel-modules package for this arch.
-# Anything not listed in those files will be in the kernel-core package.
-#
-# Please review the default list in filter-modules.sh before making
-# modifications to the overrides below. If something should be removed across
-# all arches, remove it in the default instead of per-arch.
-
-driverdirs="atm auxdisplay bcma bluetooth fmc infiniband isdn leds media memstick message mmc mtd nfc ntb pcmcia platform power ssb staging uio uwb"
-
-singlemods="ntb_netdev iscsi_ibft iscsi_boot_sysfs iscsi_tcp megaraid pmcraid qla1280 9pnet_rdma svcrdma xprtrdma hid-picolcd hid-prodikeys hwa-hc hwpoison-inject"
diff --git a/kernel.spec b/kernel.spec
index 11352bc..d460254 100644
--- a/kernel.spec
+++ b/kernel.spec
@@ -84,8 +84,6 @@ Summary: The Linux kernel
#
# standard kernel
%define with_up %{?_without_up: 0} %{?!_without_up: 1}
-# kernel-smp (only valid for ppc 32-bit)
-%define with_smp %{?_without_smp: 0} %{?!_without_smp: 1}
# kernel PAE (only valid for i686 (PAE) and ARM (lpae))
%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
# kernel-debug
@@ -109,8 +107,6 @@ Summary: The Linux kernel
#
# Only build the base kernel (--with baseonly):
%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
-# Only build the smp kernel (--with smponly):
-%define with_smponly %{?_with_smponly: 1} %{?!_with_smponly: 0}
# Only build the pae kernel (--with paeonly):
%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
# Only build the debug kernel (--with dbgonly):
@@ -193,14 +189,6 @@ Summary: The Linux kernel
# if requested, only build base kernel
%if %{with_baseonly}
-%define with_smp 0
-%define with_pae 0
-%define with_debug 0
-%endif
-
-# if requested, only build smp kernel
-%if %{with_smponly}
-%define with_up 0
%define with_pae 0
%define with_debug 0
%endif
@@ -208,7 +196,6 @@ Summary: The Linux kernel
# if requested, only build pae kernel
%if %{with_paeonly}
%define with_up 0
-%define with_smp 0
%define with_debug 0
%endif
@@ -218,7 +205,6 @@ Summary: The Linux kernel
%define with_up 0
%define with_pae 0
%endif
-%define with_smp 0
%define with_pae 0
%define with_tools 0
%define with_perf 0
@@ -228,16 +214,11 @@ Summary: The Linux kernel
%if %{with_vdso_install}
# These arches install vdso/ directories.
-%define vdso_arches %{all_x86} x86_64 ppc ppc64 ppc64p7 s390 s390x aarch64 ppc64le
+%define vdso_arches %{all_x86} x86_64 ppc64 ppc64p7 s390 s390x aarch64 ppc64le
%endif
# Overrides for generic default options
-# only ppc needs a separate smp kernel
-%ifnarch ppc
-%define with_smp 0
-%endif
-
# don't do debug builds on anything but i686 and x86_64
%ifnarch i686 x86_64
%define with_debug 0
@@ -253,12 +234,12 @@ Summary: The Linux kernel
%endif
# bootwrapper is only on ppc
-%ifnarch ppc ppc64 ppc64p7 ppc64le
+%ifnarch ppc64 ppc64p7 ppc64le
%define with_bootwrapper 0
%endif
# sparse blows up on ppc64 and sparc64
-%ifarch ppc64 ppc ppc64p7 ppc64le
+%ifarch ppc64 ppc64p7 ppc64le
%define with_sparse 0
%endif
@@ -311,16 +292,6 @@ Summary: The Linux kernel
%define with_tools 0
%endif
-%ifarch ppc
-%define asmarch powerpc
-%define hdrarch powerpc
-%define all_arch_configs kernel-%{version}-ppc{-,.}*config
-%define image_install_path boot
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%endif
-
%ifarch %{arm}
%define all_arch_configs kernel-%{version}-arm*.config
%define image_install_path boot
@@ -368,7 +339,6 @@ Summary: The Linux kernel
%ifarch %nobuildarches
%define with_up 0
-%define with_smp 0
%define with_pae 0
%define with_debuginfo 0
%define with_perf 0
@@ -382,7 +352,7 @@ Summary: The Linux kernel
%endif
# Architectures we build tools/cpupower on
-%define cpupowerarchs %{ix86} x86_64 ppc ppc64 ppc64p7 %{arm} aarch64 ppc64le
+%define cpupowerarchs %{ix86} x86_64 ppc64 ppc64p7 %{arm} aarch64 ppc64le
#
# Packages that need to be installed before the kernel is, because the %%post
@@ -400,7 +370,7 @@ Version: %{rpmversion}
Release: %{pkg_release}
# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
# SET %%nobuildarches (ABOVE) INSTEAD
-ExclusiveArch: %{all_x86} x86_64 ppc ppc64 ppc64p7 s390 s390x %{arm} aarch64 ppc64le
+ExclusiveArch: %{all_x86} x86_64 ppc64 ppc64p7 s390 s390x %{arm} aarch64 ppc64le
ExclusiveOS: Linux
Requires: kernel-%{?variant:%{variant}-}core-uname-r = %{KVERREL}%{?variant}
Requires: kernel-%{?variant:%{variant}-}modules-uname-r = %{KVERREL}%{?variant}
@@ -452,7 +422,6 @@ Source90: filter-x86_64.sh
Source91: filter-armv7hl.sh
Source92: filter-i686.sh
Source93: filter-aarch64.sh
-Source94: filter-ppc.sh
Source95: filter-ppc64.sh
Source96: filter-ppc64le.sh
Source97: filter-s390x.sh
@@ -473,8 +442,6 @@ Source32: config-x86-32-generic
Source40: config-x86_64-generic
Source50: config-powerpc-generic
-Source51: config-powerpc32-generic
-Source52: config-powerpc32-smp
Source53: config-powerpc64
Source54: config-powerpc64p7
Source55: config-powerpc64le
@@ -923,15 +890,6 @@ Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
# Now, each variant package.
-%define variant_summary The Linux kernel compiled for SMP machines
-%kernel_variant_package -n SMP smp
-%description smp-core
-This package includes a SMP version of the Linux kernel. It is
-required only on machines with two or more CPUs as well as machines with
-hyperthreading technology.
-
-Install the kernel-smp package if your machine uses two or more CPUs.
-
%ifnarch armv7hl
%define variant_summary The Linux kernel compiled for PAE capable machines
%kernel_variant_package %{pae}
@@ -995,13 +953,6 @@ exit 1
%endif
%endif
-%if %{with_smponly}
-%if !%{with_smp}
-echo "Cannot build --with smponly, smp build is disabled"
-exit 1
-%endif
-%endif
-
%if "%{baserelease}" == "0"
echo "baserelease must be greater than zero"
exit 1
@@ -1588,7 +1539,7 @@ BuildKernel() {
fi
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*.o
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*/*.o
-%ifarch ppc ppc64 ppc64p7
+%ifarch ppc64 ppc64p7
cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
%endif
if [ -d arch/%{asmarch}/include ]; then
@@ -1773,10 +1724,6 @@ BuildKernel %make_target %kernel_image %{pae}
BuildKernel %make_target %kernel_image
%endif
-%if %{with_smp}
-BuildKernel %make_target %kernel_image smp
-%endif
-
%global perf_make \
make -s %{?cross_opts} %{?_smp_mflags} -C tools/perf V=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_LIBNUMA=1 NO_STRLCPY=1 NO_BIONIC=1 prefix=%{_prefix}
%if %{with_perf}
@@ -2062,9 +2009,6 @@ fi}\
%kernel_variant_preun
%kernel_variant_post -r kernel-smp
-%kernel_variant_preun smp
-%kernel_variant_post -v smp
-
%kernel_variant_preun %{pae}
%kernel_variant_post -v %{pae} -r (kernel|kernel-smp)
@@ -2217,7 +2161,6 @@ fi
%kernel_variant_files %{with_up}
-%kernel_variant_files %{with_smp} smp
%kernel_variant_files %{with_debug} debug
%kernel_variant_files %{with_pae} %{pae}
%kernel_variant_files %{with_pae_debug} %{pae}debug
@@ -2236,6 +2179,9 @@ fi
# ||----w |
# || ||
%changelog
+* Fri May 16 2014 Josh Boyer <jwboyer at fedoraproject.org>
+- Remove ppc32 support
+
* Thu May 15 2014 Josh Boyer <jwboyer at fedoraproject.org> - 3.15.0-0.rc5.git2.9
- Fix build fail on s390x
--
1.9.0
More information about the kernel
mailing list