bittorrent freezes the system
Lonni J Friedman
netllama at gmail.com
Wed May 10 18:49:12 UTC 2006
On 5/10/06, Josenildo Marques <josenildo.marques at gmail.com> wrote:
> On Monday 08 May 2006 20:02, Lonni J Friedman escreveu o seguinte:
> > On 5/8/06, Josenildo Marques <josenildo.marques at gmail.com> wrote:
> > > On Monday 08 May 2006 19:44, Lonni J Friedman escreveu o seguinte:
> > > > On 5/8/06, Josenildo Marques <josenildo.marques at gmail.com> wrote:
> > > > > On Monday 08 May 2006 19:30, Lonni J Friedman escreveu o seguinte:
> > > > > > Try running:
> > > > > > ethtool -s eth0 duplex full
> > > > >
> > > > > The command was accepted.
> > > >
> > > > ok, so what does "ethtool eth0" show?
> > >
> > > # ethtool eth0
> > > Settings for eth0:
> > > Supported ports: [ TP MII ]
> > > Supported link modes: 10baseT/Half 10baseT/Full
> > > 100baseT/Half 100baseT/Full
> > > Supports auto-negotiation: Yes
> > > Advertised link modes: 10baseT/Half 10baseT/Full
> > > 100baseT/Half 100baseT/Full
> > > Advertised auto-negotiation: No
> > > Speed: 100Mb/s
> > > Duplex: Full
> > > Port: MII
> > > PHYAD: 32
> > > Transceiver: internal
> > > Auto-negotiation: off
> > > Supports Wake-on: pumbg
> > > Wake-on: d
> > > Current message level: 0x00000007 (7)
> > > Link detected: yes
> >
> > ok, you're at 100M/full now, which might be better. Does the problem
> > still reproduce?
>
> Since you helped me it happened twice. I'm using BT right now and the log
> messages are showing
> May 10 14:58:18 localhost kernel: eth0: PCI Bus error 2200.
> May 10 14:58:18 localhost kernel: eth0: PCI Bus error 0200.
> May 10 15:00:14 localhost kernel: eth0: PCI Bus error 2200.
> May 10 15:00:14 localhost kernel: eth0: PCI Bus error 0200.
> May 10 15:01:51 localhost kernel: eth0: PCI Bus error 2200.
> May 10 15:01:51 localhost kernel: eth0: PCI Bus error 0200.
> May 10 15:03:18 localhost kernel: eth0: PCI Bus error 2200.
> May 10 15:03:18 localhost kernel: eth0: PCI Bus error 0200.
> May 10 15:03:38 localhost kernel: eth0: PCI Bus error 2200.
> May 10 15:03:38 localhost kernel: eth0: PCI Bus error 0200.
>
> I think it must be a hardware problem... I'll try and change the network card
> in order to see if the same thing happens.
Updating the BIOS might be a good thing too.
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
L. Friedman netllama at gmail.com
LlamaLand http://netllama.linux-sxs.org
More information about the users
mailing list