I'm going to compile the sources to generate .debs

[Morenisco]

Hi,

I want to try compiling the sources to generate .debs for Debian/GNU
Linux, just a try...
I would like to avoid use alien, due to could be better to generate .debs
from the sources.

Well, I see that the URL to get the sources if the following:

http://directory.fedoraproject.org/sources/

But I'm not sure about what files do I need.
I think that I need those files:

389-admin-1.1.7.tar.bz2
389-admin-console-1.1.3.tar.bz2
389-adminutil-1.1.8.tar.bz2
389-console-1.1.3.tar.bz2
389-ds-base-1.2.1.tar.bz2
389-ds-console-1.2.0.tar.bz2
389-dsgw-1.1.2.tar.bz2

Can someone confirm please?

Thanks.


-- 
Morenisco.

Centro de Difusión de Software Libre.
http://www.cdsl.cl
http://santiago.flisol.cl
http://trabajosfloss.noc-root.net
Blog: http://morenisco.noc-root.net

[Rob Crittenden]

Morenisco wrote:
>  Hi,
>  
>  I want to try compiling the sources to generate .debs for Debian/GNU
>  Linux, just a try...
>  I would like to avoid use alien, due to could be better to generate .debs
>  from the sources.
>  
>  Well, I see that the URL to get the sources if the following:
>  
>  http://directory.fedoraproject.org/sources/
>  
>  But I'm not sure about what files do I need.
>  I think that I need those files:
>  
>  389-admin-1.1.7.tar.bz2
>  389-admin-console-1.1.3.tar.bz2
>  389-adminutil-1.1.8.tar.bz2
>  389-console-1.1.3.tar.bz2
>  389-ds-base-1.2.1.tar.bz2
>  389-ds-console-1.2.0.tar.bz2
>  389-dsgw-1.1.2.tar.bz2
>  
>  Can someone confirm please?
>   
The really tricky part is probably going to be in the dependencies: 
cyrus-sasl, db4, nss, nspr, netsnmp, mozldap, sasl2 and perhaps a few 
others. You might want to start with the current spec file to get an 
idea of what it requires.

rob

[Rich Megginson]

Morenisco wrote:
>  Hi,
>
>  I want to try compiling the sources to generate .debs for Debian/GNU
>  Linux, just a try...
>  I would like to avoid use alien, due to could be better to generate .debs
>  from the sources.
>
>  Well, I see that the URL to get the sources if the following:
>
>  http://directory.fedoraproject.org/sources/
>
>  But I'm not sure about what files do I need.
>  I think that I need those files:
>
>  389-admin-1.1.7.tar.bz2
>  389-admin-console-1.1.3.tar.bz2
>  389-adminutil-1.1.8.tar.bz2
>  389-console-1.1.3.tar.bz2
>  389-ds-base-1.2.1.tar.bz2
>  389-ds-console-1.2.0.tar.bz2
>  389-dsgw-1.1.2.tar.bz2
>
>  Can someone confirm please?
>     
Start with 389-ds-base - here are the BuildRequires from the spec file:
BuildRequires:    nspr-devel
BuildRequires:    nss-devel
BuildRequires:    svrcore-devel
BuildRequires:    mozldap-devel
BuildRequires:    db4-devel
BuildRequires:    cyrus-sasl-devel
BuildRequires:    icu
BuildRequires:    libicu-devel
# The following are needed to build the snmp ldap-agent
BuildRequires:    net-snmp-devel
%ifnarch sparc sparc64 ppc ppc64
BuildRequires:    lm_sensors-devel
%endif
BuildRequires:    bzip2-devel
BuildRequires:    zlib-devel
BuildRequires:    openssl-devel
BuildRequires:    tcp_wrappers
BuildRequires:    libselinux-devel
# the following is for the pam passthru auth plug-in
BuildRequires:    pam-devel

Most of these are already in debian, although some of them will be named 
differently.

The two notable exceptions are mozldap and svrcore

perl-Mozilla-LDAP is not a build dependency but you will need this to 
run setup et. al.
>  Thanks.
>
>
>

I'm going to compile the sources to generate .debs --scripts attached

[Ryan Braun [ADS]]

On May 19, 2009 07:21:41 pm Rich Megginson wrote:
>  Morenisco wrote:
>  > Hi,
>  >
>  > I want to try compiling the sources to generate .debs for Debian/GNU
>  > Linux, just a try...
>  > I would like to avoid use alien, due to could be better to generate .debs
>  > from the sources.
>  >
>  > Well, I see that the URL to get the sources if the following:
>  >
>  > http://directory.fedoraproject.org/sources/
>  >
>  > But I'm not sure about what files do I need.
>  > I think that I need those files:
>  >
>  > 389-admin-1.1.7.tar.bz2
>  > 389-admin-console-1.1.3.tar.bz2
>  > 389-adminutil-1.1.8.tar.bz2
>  > 389-console-1.1.3.tar.bz2
>  > 389-ds-base-1.2.1.tar.bz2
>  > 389-ds-console-1.2.0.tar.bz2
>  > 389-dsgw-1.1.2.tar.bz2
>  >
>  > Can someone confirm please?
>
>  Start with 389-ds-base - here are the BuildRequires from the spec file:
>  BuildRequires:    nspr-devel
>  BuildRequires:    nss-devel
>  BuildRequires:    svrcore-devel
>  BuildRequires:    mozldap-devel
>  BuildRequires:    db4-devel
>  BuildRequires:    cyrus-sasl-devel
>  BuildRequires:    icu
>  BuildRequires:    libicu-devel
>  # The following are needed to build the snmp ldap-agent
>  BuildRequires:    net-snmp-devel
>  %ifnarch sparc sparc64 ppc ppc64
>  BuildRequires:    lm_sensors-devel
>  %endif
>  BuildRequires:    bzip2-devel
>  BuildRequires:    zlib-devel
>  BuildRequires:    openssl-devel
>  BuildRequires:    tcp_wrappers
>  BuildRequires:    libselinux-devel
>  # the following is for the pam passthru auth plug-in
>  BuildRequires:    pam-devel
>
>  Most of these are already in debian, although some of them will be named
>  differently.
>
>  The two notable exceptions are mozldap and svrcore
>
>  perl-Mozilla-LDAP is not a build dependency but you will need this to
>  run setup et. al.
>
>  > Thanks. 
I've attached some scripts I had created a while back.  I've been running the 
etch 1.1 build for a while.  But they do build lenny 1.2 packages.  I just 
haven't tested them that much yet.  Just edit the config file,  and build 
them in the following order.

svrcore
mozldap
perldap
fedora-ds-base
adminutil
mod_nss
fefora-ds-admin
console

Also,  the debian package control section needs some work,  but the package 
depends should all work if you throw the packages in your own apt repo.  
Also,  the console jars didn't build all that well in lenny,  apt kept 
pulling in some gcj packages that kept breaking the build, so YMMV.

Ryan

I'm going to compile the sources to generate .debs --scripts attached

[Rich Megginson]

Ryan Braun [ADS] wrote:
>  On May 19, 2009 07:21:41 pm Rich Megginson wrote:
>    
> > Morenisco wrote:
> >     
> >> Hi,
> >>
> >> I want to try compiling the sources to generate .debs for Debian/GNU
> >> Linux, just a try...
> >> I would like to avoid use alien, due to could be better to generate .debs
> >> from the sources.
> >>
> >> Well, I see that the URL to get the sources if the following:
> >>
> >> http://directory.fedoraproject.org/sources/
> >>
> >> But I'm not sure about what files do I need.
> >> I think that I need those files:
> >>
> >> 389-admin-1.1.7.tar.bz2
> >> 389-admin-console-1.1.3.tar.bz2
> >> 389-adminutil-1.1.8.tar.bz2
> >> 389-console-1.1.3.tar.bz2
> >> 389-ds-base-1.2.1.tar.bz2
> >> 389-ds-console-1.2.0.tar.bz2
> >> 389-dsgw-1.1.2.tar.bz2
> >>
> >> Can someone confirm please?
> >>       
> > Start with 389-ds-base - here are the BuildRequires from the spec file:
> > BuildRequires:    nspr-devel
> > BuildRequires:    nss-devel
> > BuildRequires:    svrcore-devel
> > BuildRequires:    mozldap-devel
> > BuildRequires:    db4-devel
> > BuildRequires:    cyrus-sasl-devel
> > BuildRequires:    icu
> > BuildRequires:    libicu-devel
> > # The following are needed to build the snmp ldap-agent
> > BuildRequires:    net-snmp-devel
> > %ifnarch sparc sparc64 ppc ppc64
> > BuildRequires:    lm_sensors-devel
> > %endif
> > BuildRequires:    bzip2-devel
> > BuildRequires:    zlib-devel
> > BuildRequires:    openssl-devel
> > BuildRequires:    tcp_wrappers
> > BuildRequires:    libselinux-devel
> > # the following is for the pam passthru auth plug-in
> > BuildRequires:    pam-devel
> >
> > Most of these are already in debian, although some of them will be named
> > differently.
> >
> > The two notable exceptions are mozldap and svrcore
> >
> > perl-Mozilla-LDAP is not a build dependency but you will need this to
> > run setup et. al.
> >
> >     
> >> Thanks.
> >>       
>
>  I've attached some scripts I had created a while back.  I've been running the 
>  etch 1.1 build for a while.  But they do build lenny 1.2 packages.  I just 
>  haven't tested them that much yet.  Just edit the config file,  and build 
>  them in the following order.
>
>  svrcore
>  mozldap
>  perldap
>  fedora-ds-base
>  adminutil
>  mod_nss
>  fefora-ds-admin
>  console
>
>  Also,  the debian package control section needs some work,  but the package 
>  depends should all work if you throw the packages in your own apt repo.  
>  Also,  the console jars didn't build all that well in lenny,  apt kept 
>  pulling in some gcj packages that kept breaking the build, so YMMV.
>     
Does debian now include openjdk?  If so, you should be able to use that 
instead of gcj.
>  Ryan
>
>
>

I'm going to compile the sources to generate .debs --scripts attached

[Morenisco]

On Fri, May 22, 2009 10:57 am, Renato Ribeiro da Silva wrote:
>  Morenisco,
>  I've compiled the sources and generate .debs following the
>  http://wiki.debian.org/Teams/DebianFDSPackaging instructions. It
>  Works.
>  Renato.Em 21/05/2009 14:16, Rich Megginson; 
Wow Renato, I'll try to contribute with the people that are generating the
packages there.

Thanks a lot and regards.


-- 
Morenisco.

Centro de Difusión de Software Libre.
http://www.cdsl.cl
http://santiago.flisol.cl
http://trabajosfloss.noc-root.net
Blog: http://morenisco.noc-root.net