Author: tombo
Update of /cvs/docs/release-notes In directory cvs-int.fedora.redhat.com:/tmp/cvs-serv12067
Modified Files: networking-it.xml Log Message: Completed
Index: networking-it.xml =================================================================== RCS file: /cvs/docs/release-notes/networking-it.xml,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- networking-it.xml 4 Nov 2005 20:02:41 -0000 1.1 +++ networking-it.xml 4 Nov 2005 21:13:34 -0000 1.2 @@ -116,23 +116,23 @@ </listitem> </varlistentry> <varlistentry> - <term>DCCP Protocol Support</term> + <term>Supporto protocollo DCCP</term> <listitem> - <para>Kernel version 2.6.14-rc1 was the first version to receive - support for the DCCP protocol. The implementation is still - experimental but known to work. Work to make userspace - applications aware of this new protocol has started. + <para>Il Kernel versione 2.6.14-rc1 fu la prima versione a ricevere + supporto per il protocollo DCCP. L'implementazione �� ancora + sperimentale ma �� risaputo che funziona. Lavora per far si che le applicazioni + in userspace siano a conoscenza che questo nuovo protocollo �� iniziato. </para> </listitem> </varlistentry> <varlistentry> <term>Wireless</term> <listitem> - <para>A new driver named HostAP has been added to 2.6.14-rc1 - allowing the emulation of a wireless access point in software. - Currently this driver only works for Intersil Prism2-based - cards (PC Card/PCI/PLX). Support for wireless cards Intel(R) - PRO/Wireless 2100 and 2200 has been added. + <para>Un nuovo driver denominato HostAP �� stato aggiunto a 2.6.14-rc1 + permettendo l'emulazione di un access point wireless in software. + Attualmente questo driver funziona solo per le carte Intersil Prism2-based + (PC Card/PCI/PLX). Il supporto per le carte wireless Intel(R) + PRO/Wireless 2100 e 2200 �� stato aggiunto. </para> </listitem> </varlistentry> @@ -141,30 +141,30 @@ <listitem> <itemizedlist> <listitem> - <para>A lot of TCP Segmentation Offloading (TSO) related - fixes have been included. + <para>Moltissimi fix riguardanti la TCP Segmentation Offloading (TSO) + sono stati inclusi. </para> </listitem> <listitem> - <para>A new textsearch infrastructure has been added - useable with the corresponding iptables and extended + <para>Una nuova infrastruttura di ricerca testo �� stata aggiunta + utilizzabile con il corrispondente iptables ed extended match. </para> </listitem> <listitem> - <para>Both the IPv4 and IPv6 multicast joining interface - visible by userspace have been reworked and brought up to - the latest standards. + <para>Entrambe le IPv4 ed IPv6 multicast joining interface + visibili in userspace sono state ristrutturate e portate fino + agli ultimi standards. </para> </listitem> <listitem> - <para>The SNMPv2 MIB counter ipInAddrErrors is finally - supported for IPv4. + <para>Il contatore SNMPv2 MIB ipInAddrErrors �� finalmente + supportato per IPv4. </para> </listitem> <listitem> - <para>Various new socket options proposed in Advanced API - (RFC3542) have been added. + <para>Nuove varie opzioni socket proposte in Advanced API + (RFC3542) sono state aggiunte. </para> </listitem> </itemizedlist> @@ -175,10 +175,10 @@ <title>Userspace Tools</title> <title>iproute</title> <para> - The IPv4 address deletion algorithm did not take the prefix - length into account up to kernel version 2.6.12. Since this has - changed the iproute2 tool now issues a warning if no prefix length - is provided to warn about possible unintended deletions: + L'algoritmo di cancellazione indirizzo IPv4 address non prendeva la lunghezza + del prefisso in conto fino al kernel versione 2.6.12. Da quando ci�� �� + cambiato lo strumento iproute2 ora invia un messaggio d'avvertimento se un prefisso di + privo di lunghezza �� fornito per avvertire di possibili cancellazioni non intenzionali: </para> <screen> ip addr list dev eth0 @@ -191,69 +191,68 @@ in further releases, fix your scripts! </screen> <para> - The correct method of deleting the address and thus avoiding the - warning is: + Il metodo corretto di cancellare l'indirizzo evitando l'avvertimento ��: </para> <screen> su -c 'ip addr del 10.0.0.3/24 dev eth0' </screen> <para> - It has not been possible to tell if an interface is down - administratively or because no carrier can be found (cable - unplugged). The flag <computeroutput>NO-CARRIER</computeroutput> - has been introduced that shows up as a link flag if the link is - administratively up but no carrier can be found. + Non �� stato possibile dire se un interfaccia �� spenta + a scopo amministrativo o perch�� non c'�� linea (cavo + staccato). Il flag <computeroutput>NO-CARRIER</computeroutput> + �� stato introdotto per mostrare un link flag se il link �� + administrativamente su ma non viene trovata linea. </para> <para> - The <command>ip</command> command now supports a batch mode via - the argument <option>-batch</option> just like the - <command>tc</command> command to speed up batches of tasks. + Il comando <command>ip</command> adesso supporta una modalit�� batch + con l'argomento <option>-batch</option> in modo simile al + comando <command>tc</command> per velocizzare delle serie di operazioni. </para> </section> </section>
<!-- cruft, but saved just in case :) <para> - This section contains information relating to network connectivity. + Questa sezione contiene informazioni relative alla connettivit�� di rete. </para> <section id="sn-networking-networkmanager"> <title><filename>NetworkManager</filename></title> <para> - The <command>NetworkManager</command> service allows computers - such as laptops to automatically manage changing network - connections. It includes support for wireless networking. + Il servizio <command>NetworkManager</command> permette a computers + come i laptops di amministrare automaticamente cambi di connessione + di rete. Include il supporto per le connessioni di rete wireless. </para> <para> - You must manually enable the <command>NetworkManager</command> - service. To do so, type the following in a terminal window: + Devi abilitare manualmente il servizio <command>NetworkManager</command>. + Per farlo scrivi quanto segue in una finestra terminale: </para> <screen> su -c '/sbin/chkconfig --level 345 NetworkManager on; /sbin/service NetworkManager start' su -c '/sbin/chkconfig --level 345 NetworkManagerDispatcher on; /sbin/service NetworkManagerDispatcher start' </screen> <para> - Enter the root password when prompted. + Inserite la password di root quando richiesto. </para> <para> - Use the <application>Network Monitor</application> desktop applet - to monitor and configure <command>NetworkManager</command>. To load the - applet in GNOME, right-click on the panel and select: + Usate l'applet del desktop <application>Network Monitor</application> + per monitorare e configurare <command>NetworkManager</command>. Per caricare + l'applet in GNOME, click con il bottone destro del mouse sul pannelo e selezionate: </para> <para> <guimenuitem>Add to Panel...</guimenuitem><guimenuitem>Network Monitor</guimenuitem> </para> <para> - <command>NetworkManager</command> uses BIND to proxy DNS requests. - Enabling the <command>NetworkManager</command> service also loads the - <command>named</command> service as well. By default BIND is - configured as a cacheing service for the local system, and does - not accept connections from other systems. + Il <command>NetworkManager</command> usa BIND per mettere in cache le richieste DNS. + Abilitando il servizio <command>NetworkManager</command> verr�� caricato anche + il servizio <command>named</command>. Per impostazione predefinita BIND �� + configurato come un servizio di cacheing per il sistema locale, e non accetta + connessioni da altri sistemi. </para> <para> - Note that some wireless network cards require drivers or firmware - that cannot be included with &DISTRO;. This software must be - installed separately for <command>NetworkManager</command> to function. + Nota che alcune shcede di rete wireless richiedono drivers o firmware + che non pu�� essere incluso con &DISTRO;. Questo software deve essere + installato separatamente per far funzionare <command>NetworkManager</command>. </para> --> <!--