[install-guide/f21-branch] Small fixes in NetworkSpoke

[pbokoc]

commit 6c83cc7d59a1a1803efc609b7c9a377b6b0a7e8a
Author: Petr Bokoc <pbokoc(a)redhat.com&gt;
Date:   Wed Dec 3 14:52:01 2014 +0100

    Small fixes in NetworkSpoke

 en-US/NetworkSpoke_EditConnection.xml |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
---
diff --git a/en-US/NetworkSpoke_EditConnection.xml
b/en-US/NetworkSpoke_EditConnection.xml
index bddf74d..c260489 100644
--- a/en-US/NetworkSpoke_EditConnection.xml
+++ b/en-US/NetworkSpoke_EditConnection.xml
@@ -22,7 +22,7 @@
                     In the <guilabel>General</guilabel> tab of the
configuration dialog, you can select or unselect the <guilabel>Automatically connect
to this network when it is available</guilabel> check box to allow or disallow this
connection to connect by default. When enabled on a wired connection, this means the
system will typically connect during startup (unless you unplug the network cable); on a
wireless connection, it means that the interface will attempt to connect to any known
wireless networks in range.
                 </para>
                 <para>
-                    Additionally, you can allow or disallow all users on the system from
connecting to this network using the <guilabel>All users may connect to this
network</guilabel> tab. If you disable this option, only <systemitem
class="username">root</systemitem> will be able to connect to this
network.
+                    Additionally, you can allow or disallow all users on the system from
connecting to this network using the <guilabel>All users may connect to this
network</guilabel> option. If you disable this option, only <systemitem
class="username">root</systemitem> will be able to connect to this
network.
                 </para>
                 <note>
                     <para>
@@ -35,7 +35,7 @@
             <term>Set up static IPv4 or IPv6 settings</term>
             <listitem>
                 <para>
-                    By default, both <systemitem
class="protocol">IPv4</systemitem> and <systemitem
class="protocol">IPv6</systemitem> are set to automatic configuration
depending on current network settings. This means that addresses such as the local IP
address, DNS address, and other settings will be detected automatically each time the
interface connects to a network. In many cases, this is sufficient, but you can also
provide static configuration in the <guilabel>IPv4 Settings</guilabel> and
<guilabel>IPv6</guilabel> settings, respectively.
+                    By default, both <systemitem
class="protocol">IPv4</systemitem> and <systemitem
class="protocol">IPv6</systemitem> are set to automatic configuration
depending on current network settings. This means that addresses such as the local IP
address, DNS address, and other settings will be detected automatically each time the
interface connects to a network. In many cases, this is sufficient, but you can also
provide static configuration in the <guilabel>IPv4 Settings</guilabel> and
<guilabel>IPv6 Settings</guilabel>, respectively.
                 </para>
                 <para>
                     To set static network configuration, navigate to one of the settings
tabs and select a method other than <guilabel>Automatic</guilabel> (for
example, <guilabel>Manual</guilabel>) from the
<guilabel>Method</guilabel> drop-down menu. This will enable the
<guilabel>Addresses</guilabel> field below.