11:42 p.m.
commit 14cee5031032e2acf73dbc3439ab942907136c55
Author: Jack Reed <jreed(a)redhat.com>
Date: Tue Dec 11 15:41:50 2012 +1000
Restored Add Partition, Create Software RAID, and Create LVM partitioning sections
en-US/Adding_Partitions-x86.xml | 71 +++++---------
en-US/Create_LVM-x86.xml | 90 ++++++++++++------
en-US/Create_Software_RAID-common-para-2.xml | 2 +-
en-US/Create_Software_RAID-x86.xml | 116 ++++++++++++++++++-----
en-US/Disk_Partitioning-x86.xml | 40 +-------
en-US/images/diskpartitioning/lvm-pv.png | Bin 38332 -> 21213 bytes
en-US/images/diskpartitioning/software-raid.png | Bin 40502 -> 30097 bytes
7 files changed, 180 insertions(+), 139 deletions(-)
---
diff --git a/en-US/Adding_Partitions-x86.xml b/en-US/Adding_Partitions-x86.xml
index a12eaf3..5c80e59 100644
--- a/en-US/Adding_Partitions-x86.xml
+++ b/en-US/Adding_Partitions-x86.xml
@@ -8,25 +8,17 @@
<!-- Adding Partitions --> <!-- Begin Index terms --> <xi:include
href="Adding_Partitions_common-indexterm-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
<xi:include href="Adding_Partitions_common-indexterm-2.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
<xi:include href="Adding_Partitions_common-indexterm-3.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- End Index terms --> <para>
- To add a new partition, select the <guibutton>Create</guibutton> button. A
dialog box appears (refer to <xref
linkend="fig-diskpartitioning-part-add-x86" />).
- </para>
- <note>
- <title>Note</title>
- <para>
- You must dedicate at least one partition for this installation, and optionally more.
For more information, refer to <xref linkend="ch-partitions-x86" />.
- </para>
-
- </note>
- <figure float="0" id="fig-diskpartitioning-part-add-x86">
- <title>Creating a New Partition</title>
+ <!-- End Index terms --> <xi:include
href="Disk_Partitioning_Graphical_common-para-10.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- Adding a partition is a two-step process. --> <xi:include
href="Disk_Partitioning_Graphical_common-para-2.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- Above the graphical representation of the device... --> <figure
float="0" id="fig-diskpart-ddmain-x86">
+ <title>Partitioning on x86, AMD64, and Intel 64 Systems</title>
<mediaobject>
<imageobject>
- <imagedata fileref="images/diskpartitioning/part-add.png"
format="PNG" width="444" />
+ <imagedata fileref="images/diskpartitioning/ddmain.png"
format="PNG" width="444" />
</imageobject>
<textobject>
<para>
- Creating a new partition.
+ The main partitioning screen.
</para>
</textobject>
@@ -34,40 +26,23 @@
</mediaobject>
</figure>
- <itemizedlist>
- <xi:include href="Adding_Partitions_x86_ppc-listitem-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Mount Point: Enter the partition's mount point. --> <listitem>
- <para>
- <guilabel>File System Type</guilabel>: Using the pull-down menu, select
the appropriate file system type for this partition. For more information on file system
types, refer to <xref linkend="s3-diskpartitioning-file-x86" />.
- </para>
-
- </listitem>
- <xi:include href="Adding_Partitions_x86_ppc-listitem-2.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Allowable Drives: This field contains a list of the hard disks installed on
your system. --> <xi:include
href="Adding_Partitions_x86_ppc-listitem-3.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Size (MB): Enter the size (in megabytes) of the partition. -->
<xi:include href="Adding_Partitions_x86_ppc-listitem-4.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Additional Size Options: Choose whether to keep this partition at a fixed
size, -->
- <xi:include href="Adding_Partitions_x86_ppc-listitem-7.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Encrypt: Choose whether to encrypt the partition so that the data stored on
it cannot be accessed without a passphrase --> <xi:include
href="Adding_Partitions_x86_ppc-listitem-5.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- OK: Select OK once you are satisfied with the settings --> <xi:include
href="Adding_Partitions_x86_ppc-listitem-6.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Cancel: Select Cancel if you do not want -->
- </itemizedlist>
- <section id="s3-diskpartitioning-file-x86">
- <xi:include href="Adding_Partitions_x86_ppc-title-2.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- File System Types --> <!-- Begin Index terms --> <xi:include
href="Adding_Partitions-section-2-indexterm-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <xi:include href="Adding_Partitions-section-2-indexterm-2.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <xi:include href="Adding_Partitions-section-2-indexterm-3.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <xi:include href="Adding_Partitions-section-2-indexterm-4.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- End Index terms --> <xi:include
href="Adding_Partitions-section-2-para-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Fedora allows you to create different partition types --> <xi:include
href="Adding_Partitions-section-2-itemizedlist-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Partition types --> <xi:include
href="Adding_Partitions-section-2-itemizedlist-2.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- File systems -->
-
- <note>
- <para>
- The Btrfs file system is unavailable in Fedora 17.
- </para>
- </note>
- </section>
+ <xi:include href="Disk_Partitioning_Graphical_common-para-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- Anaconda displays several details for each device listed -->
<xi:include href="Disk_Partitioning_Graphical_common-para-3.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- To change which drive/s a mount point should be located on -->
<para>
+ At the bottom of the screen, a link will state how many storage devices were selected
in <guilabel>Installation Destination</guilabel> — refer to <xref
linkend="s1-diskpartsetup-x86" />. This link opens the
<guilabel>Selected Devices</guilabel> dialog, where you can specify which
device the bootloader should be installed on. Refer to <xref
linkend="s1-x86-bootloader" /> for more information.
+ </para>
+ <!-- <xi:include href="Disk_Partitioning_Graphical_common-para-4.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
+ <!-- Using your mouse, click once to highlight a particular field... -->
<!-- <xi:include
href="Disk_Partitioning_Graphical_common-variablelist-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
+ <!-- the name of the device, logical volume, or partition --> <!--
<xi:include href="Disk_Partitioning_Graphical_common-para-5.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
+ <!-- Beneath the lower pane are four buttons: --> <!-- <xi:include
href="Disk_Partitioning_Graphical_common-para-6.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
+ <!-- Select a device or partition by clicking on it --> <!--
<xi:include href="Disk_Partitioning_common-variablelist-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
+ <!-- Create a new partition, logical volume, or software RAID --> <!--
<xi:include href="Create_Storage-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
+ <!-- Create Storage --> <xi:include
href="Disk_Partitioning_Graphical_common-para-7.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- To customize a partition --> <xi:include
href="Disk_Partitioning_Graphical_common-itemizedlist-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- Mount point --> <xi:include
href="Disk_Partitioning_Graphical_common-para-8.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- Click Apply Changes --> <xi:include
href="Disk_Partitioning_Graphical_common-para-9.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- When all partitions have been created --> <xi:include
href="File_System_Types-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- File System Types -->
</section>
diff --git a/en-US/Create_LVM-x86.xml b/en-US/Create_LVM-x86.xml
index 283650a..e75a9e5 100644
--- a/en-US/Create_LVM-x86.xml
+++ b/en-US/Create_LVM-x86.xml
@@ -8,36 +8,66 @@
<!-- Create LVM Logical Volume --> <xi:include
href="Create_LVM-common-important-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
<!-- Important — LVM Unavailable in Text Installs --> <xi:include
href="Create_LVM-common-para-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
<!-- Logical Volume Management (LVM) presents a simple logical view of underlying
physical storage space --> <xi:include
href="Create_LVM-common-para-2.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- To read more about LVM, refer to the Fedora Deployment Guide -->
<variablelist>
- <varlistentry>
- <term>LVM Physical Volume</term>
- <listitem>
- <para>
- Choose this option to configure a partition or device as an LVM physical volume.
This option is the only choice available if your storage does not already contain LVM
Volume Groups. This is the same dialog that appears when you add a standard partition —
refer to <xref linkend="Adding_Partitions-x86" /> for a description of the
available options. Note, however, that <guilabel>File System Type</guilabel>
must be set to <literal>physical volume (LVM)</literal>
- </para>
- <figure float="0">
- <title>Create an LVM Physical Volume</title>
- <mediaobject>
- <imageobject>
- <imagedata fileref="images/diskpartitioning/lvm-pv.png"
format="PNG" width="444" />
- </imageobject>
- <textobject>
- <para>
- The Create an LVM Physical Volume dialog.
- </para>
-
- </textobject>
-
- </mediaobject>
-
- </figure>
-
- </listitem>
-
- </varlistentry>
-
- </variablelist>
- <xi:include href="Create_LVM-common-variablelist-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- To read more about LVM, refer to the Fedora Deployment Guide -->
+
+ <figure float="0">
+ <title>Create an LVM Physical Volume</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata fileref="images/diskpartitioning/lvm-pv.png"
format="PNG" width="444" />
+ </imageobject>
+ <textobject>
+ <para>
+ The Create an LVM Physical Volume dialog.
+ </para>
+
+ </textobject>
+
+ </mediaobject>
+
+ </figure>
+
+ <para>
+ To create an LVM physical volume:
+ </para>
+
+ <procedure>
+ <step>
+ <para>
+ Create a partition as described in <xref linkend="Adding_Partitions-x86"
/>. Configuring this partition will configure the LVM physical volume.
+ </para>
+ </step>
+
+ <step>
+ <para>
+ Click the <guilabel>Device Type</guilabel> dropdown menu and select
<guilabel>LVM</guilabel>.
+ </para>
+ </step>
+
+ <step>
+ <para>
+ An additional dropdown menu will appear: <guilabel>Volume
Group</guilabel>. The menu will display a newly-created volume group name. Either
click the menu and select <guilabel>Create a new volume group</guilabel> or
click <guibutton>Modify</guibutton> to configure the newly-created volume
group.
+ </para>
+ </step>
+
+ <step>
+ <para>
+ Each option will lead to the <guilabel>Configure Volume
Group</guilabel> dialog, where you can rename the logical volume group and select
which disks will be included. Click <guibutton>Save</guibutton> when the group
is configured.
+ </para>
+ </step>
+
+ <step>
+ <para>
+ Click <guibutton>Apply Changes</guibutton> to save your changes, and
either continue with another partition or click <guibutton>Finish
Partitioning</guibutton> to return to the Installation Hub.
+ </para>
+ </step>
+
+ </procedure>
+
+
+
+
+ <!-- <xi:include href="Create_LVM-common-variablelist-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
<!-- LVM Physical Volume - Choose this option to configure a partition or device as
an LVM physical volume. -->
</section>
diff --git a/en-US/Create_Software_RAID-common-para-2.xml
b/en-US/Create_Software_RAID-common-para-2.xml
index 77b54c9..662c78d 100644
--- a/en-US/Create_Software_RAID-common-para-2.xml
+++ b/en-US/Create_Software_RAID-common-para-2.xml
@@ -4,6 +4,6 @@
%BOOK_ENTITIES;
]>
<para>
- To make a RAID device, you must first create software RAID partitions. Once you have
created two or more software RAID partitions, select
<guibutton>RAID</guibutton> to join the software RAID partitions into a RAID
device.
+ In earlier versions of Fedora, RAID partitions and devices were created in separate
steps. Now, the RAID device is created in one step and disks are added or removed as
necessary. RAID partitions are not individually created prior to this. One RAID partition
is allowed per disk for each device, so the number of disks available to the installer
will determine which levels of RAID device are available to you.
</para>
diff --git a/en-US/Create_Software_RAID-x86.xml b/en-US/Create_Software_RAID-x86.xml
index 9ce27b1..68e5d4f 100644
--- a/en-US/Create_Software_RAID-x86.xml
+++ b/en-US/Create_Software_RAID-x86.xml
@@ -7,37 +7,107 @@
<xi:include href="Create_Software_RAID-common-title-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
<!-- Create Software RAID --> <xi:include
href="Create_Software_RAID-common-para-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
<!-- Redundant arrays of independent disks (RAIDs) are constructed from multiple
storage devices --> <xi:include
href="Create_Software_RAID-common-para-2.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- To make a RAID device, you must first create software RAID partitions. -->
<variablelist>
- <varlistentry>
- <term>RAID Partition</term>
- <listitem>
- <para>
- Choose this option to configure a partition for software RAID. This option is the
only choice available if your disk contains no software RAID partitions. This is the same
dialog that appears when you add a standard partition — refer to <xref
linkend="Adding_Partitions-x86" /> for a description of the available
options. Note, however, that <guilabel>File System Type</guilabel> must be set
to <literal>software RAID</literal>
- </para>
- <figure float="0">
- <title>Create a software RAID partition</title>
- <mediaobject>
- <imageobject>
- <imagedata fileref="images/diskpartitioning/software-raid.png"
format="PNG" width="444" />
+ <!-- To make a RAID device, you must first create software RAID partitions. -->
+
+ <figure float="0">
+ <title>Create a software RAID device</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata fileref="images/diskpartitioning/software-raid.png"
format="PNG" width="444" />
</imageobject>
<textobject>
<para>
- The create a software RAID partition dialog.
+ Configuring a software RAID device in the Manual Partitioning section
</para>
</textobject>
- </mediaobject>
+ </mediaobject>
- </figure>
-
- </listitem>
-
- </varlistentry>
-
- </variablelist>
- <xi:include href="Create_Software_RAID-common-variablelist-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- To make a RAID device, you must first create software RAID partitions.
-->
+ </figure>
+
+ <para>
+ RAID configuration options will only be visible if you have selected two or more disks
in <xref linkend="s1-diskpartsetup-x86" />. At least two disks are
required to create a RAID device.
+ </para>
+
+ <para>
+ To create a RAID device:
+ </para>
+
+ <procedure>
+ <step>
+ <para>
+ Create a partition as described in <xref linkend="Adding_Partitions-x86"
/>. Configuring this partition will configure the RAID device.
+ </para>
+ </step>
+
+ <step>
+ <para>
+ Click the <guilabel>Device Type</guilabel> dropdown menu and select
<guilabel>RAID</guilabel>.
+ </para>
+ </step>
+
+ <step>
+ <para>
+ A group of checkboxes will appear beneath the <guilabel>File
System</guilabel> dropdown menu, which is grayed out for RAID. Choose the RAID level
of the device by checking the appropriate boxes (refer to <xref
linkend="RAID_Levels-x86" /> for information about RAID levels). Certain
boxes may be grayed out and labeled <guilabel>not enough disks</guilabel> if
that RAID level cannot be achieved with the available disks.
+ </para>
+ <itemizedlist>
+ <listitem>
+ <para>
+ <guilabel>Optimized</guilabel> = RAID0
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ <guilabel>Redundancy</guilabel> = RAID1
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ <guilabel>Error detection</guilabel> = RAID4
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ <guilabel>Optimized</guilabel> and
<guilabel>Distributed</guilabel> = RAID5
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ <guilabel>Redundant</guilabel> = RAID6
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ <guilabel>Redundancy</guilabel> and
<guilabel>Optimized</guilabel> = RAID10
+ </para>
+ </listitem>
+ </itemizedlist>
+ </step>
+ <step>
+ <para>
+ While keeping the partition selected in the left-hand pane, select the configuration
button below the pane to choose which disks will be included in the RAID device. If fewer
disks are included than the specified RAID level needs, you will be informed that the
device could not be created.
+ </para>
+ </step>
+
+ <step>
+ <para>
+ Click <guibutton>Apply Changes</guibutton> to save your changes, and
either continue with another partition or click <guibutton>Finish
Partitioning</guibutton> to return to the Installation Hub.
+ </para>
+ </step>
+
+ </procedure>
+
+ <section id="RAID_Levels-x86">
+ <title>RAID Levels</title>
+
+ <para>
+ RAID devices can be created at set levels. Each level distributes data in a specific
fashion and offers distinctive performance and protection features. The following is a
brief description of the available RAID levels.
+ </para>
+
+ <xi:include href="Create_Software_RAID-common-itemizedlist-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- RAID 0 — distributes data across multiple storage devices. -->
+ </section>
</section>
diff --git a/en-US/Disk_Partitioning-x86.xml b/en-US/Disk_Partitioning-x86.xml
index 6df120c..f2251ff 100644
--- a/en-US/Disk_Partitioning-x86.xml
+++ b/en-US/Disk_Partitioning-x86.xml
@@ -24,43 +24,9 @@
</para>
<xi:include href="Disk_Partitioning_common-para-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
<!-- The partitioning tool used by the installation program --> <xi:include
href="Disk_Partitioning_Graphical_x86_ppc-para-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- The Manual Partitioning screen initially features... --> <xi:include
href="Disk_Partitioning_Graphical_common-para-10.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Adding a partition is a two-step process. --> <xi:include
href="Disk_Partitioning_Graphical_common-para-2.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Above the graphical representation of the device... --> <figure
float="0" id="fig-diskpart-ddmain-x86">
- <title>Partitioning on x86, AMD64, and Intel 64 Systems</title>
- <mediaobject>
- <imageobject>
- <imagedata fileref="images/diskpartitioning/ddmain.png"
format="PNG" width="444" />
- </imageobject>
- <textobject>
- <para>
- The main partitioning screen.
- </para>
-
- </textobject>
-
- </mediaobject>
-
- </figure>
- <xi:include href="Disk_Partitioning_Graphical_common-para-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Anaconda displays several details for each device listed -->
<xi:include href="Disk_Partitioning_Graphical_common-para-3.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- To change which drive/s a mount point should be located on -->
<para>
- At the bottom of the screen, a link will state how many storage devices were selected
in <guilabel>Installation Destination</guilabel> — refer to <xref
linkend="s1-diskpartsetup-x86" />. This link opens the
<guilabel>Selected Devices</guilabel> dialog, where you can specify which
device the bootloader should be installed on. Refer to <xref
linkend="s1-x86-bootloader" /> for more information.
- </para>
- <!-- <xi:include href="Disk_Partitioning_Graphical_common-para-4.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
- <!-- Using your mouse, click once to highlight a particular field... -->
<!-- <xi:include
href="Disk_Partitioning_Graphical_common-variablelist-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
- <!-- the name of the device, logical volume, or partition --> <!--
<xi:include href="Disk_Partitioning_Graphical_common-para-5.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
- <!-- Beneath the lower pane are four buttons: --> <!-- <xi:include
href="Disk_Partitioning_Graphical_common-para-6.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
- <!-- Select a device or partition by clicking on it --> <!--
<xi:include href="Disk_Partitioning_common-variablelist-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
- <!-- Create a new partition, logical volume, or software RAID --> <!--
<xi:include href="Create_Storage-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
- <!-- Create Storage --> <!-- <xi:include
href="Adding_Partitions-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
- <!-- Adding Partitions --> <xi:include
href="Disk_Partitioning_Graphical_common-para-7.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- To customize a partition --> <xi:include
href="Disk_Partitioning_Graphical_common-itemizedlist-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Mount point --> <xi:include
href="Disk_Partitioning_Graphical_common-para-8.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Click Apply Changes --> <xi:include
href="Disk_Partitioning_Graphical_common-para-9.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- When all partitions have been created --> <xi:include
href="File_System_Types-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- File System Types --> <!-- <xi:include
href="Create_Software_RAID-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
- <!-- Create Software RAID --> <!-- <xi:include
href="Create_LVM-x86.xml" xmlns:xi="http://www.w3.org/2001/XInclude"
/> -->
+ <!-- The Manual Partitioning screen initially features... --> <xi:include
href="Adding_Partitions-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- Adding Partitions --> <xi:include
href="Create_Software_RAID-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- Create Software RAID --> <xi:include
href="Create_LVM-x86.xml" xmlns:xi="http://www.w3.org/2001/XInclude"
/>
<!-- Create LVM Logical Volume --> <xi:include
href="Disk_Partitioning_Scheme-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
<!-- Recommended Partitioning Scheme -->
</section>
diff --git a/en-US/images/diskpartitioning/lvm-pv.png
b/en-US/images/diskpartitioning/lvm-pv.png
index 6fde276..c05cc80 100644
Binary files a/en-US/images/diskpartitioning/lvm-pv.png and
b/en-US/images/diskpartitioning/lvm-pv.png differ
diff --git a/en-US/images/diskpartitioning/software-raid.png
b/en-US/images/diskpartitioning/software-raid.png
index 78c31eb..2ca0307 100644
Binary files a/en-US/images/diskpartitioning/software-raid.png and
b/en-US/images/diskpartitioning/software-raid.png differ