Branch 'f13' - en-US/Automatic_Partitioning_common-figure-1.xml en-US/Automatic_Partitioning_common-itemizedlist-1.xml en-US/Automatic_Partitioning_common-para-6.xml en-US/Automatic_Partitioning_common-title.xml en-US/Automatic_Partitioning-x86.xml en-US/Create_Storage-common-itemizedlist-1.xml en-US/Create_Storage-common-itemizedlist-2.xml en-US/Create_Storage-common-itemizedlist-3.xml en-US/Deleting_Partitions_x86_ppc-indexterm-1.xml en-US/Deleting_Partitions_x86_ppc-indexterm-2.xml en-US/Deleting_Partiti
6:51 a.m.
en-US/Automatic_Partitioning-x86.xml | 60 ----
en-US/Automatic_Partitioning_common-figure-1.xml | 13 -
en-US/Automatic_Partitioning_common-itemizedlist-1.xml | 46 ---
en-US/Automatic_Partitioning_common-para-6.xml | 26 --
en-US/Automatic_Partitioning_common-title.xml | 8
en-US/Create_Storage-common-itemizedlist-1.xml | 17 -
en-US/Create_Storage-common-itemizedlist-2.xml | 27 --
en-US/Create_Storage-common-itemizedlist-3.xml | 27 --
en-US/Deleting_Partitions-x86.xml | 25 --
en-US/Deleting_Partitions_x86_ppc-indexterm-1.xml | 9
en-US/Deleting_Partitions_x86_ppc-indexterm-2.xml | 11
en-US/Deleting_Partitions_x86_ppc-para-1.xml | 10
en-US/Deleting_Partitions_x86_ppc-title.xml | 8
en-US/Disk_Partitioning_Disk_Druid-listitem-LVM.xml | 48 ---
en-US/Disk_Partitioning_Disk_Druid-listitem-delete.xml | 17 -
en-US/Disk_Partitioning_Disk_Druid-listitem-makeraid.xml | 114 ---------
en-US/Disk_Partitioning_Disk_Druid-listitem-reset.xml | 9
en-US/Disk_Partitioning_Disk_Druid-x86-indexterm-1.xml | 8
en-US/Disk_Partitioning_Disk_Druid-x86-indexterm-2.xml | 8
en-US/Disk_Partitioning_Disk_Druid-x86.xml | 48 ---
en-US/Disk_Partitioning_Disk_Druid_common-indexterm-1.xml | 9
en-US/Disk_Partitioning_Disk_Druid_common-para-1.xml | 8
en-US/Disk_Partitioning_Disk_Druid_common-title.xml | 5
en-US/Disk_Partitioning_Disk_Druid_common_listitem-para-1.xml | 11
en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml | 125 ----------
en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-2.xml | 13 -
en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-para-2.xml | 11
en-US/Disk_Partitioning_Fields-common.xml | 60 ----
en-US/Disk_Partitioning_Graphical-x86.xml | 20 -
en-US/Disk_Partitioning_Graphical_x86_ppc-title.xml | 8
en-US/Disk_Partitioning_Setup_common-warning-1.xml | 11
en-US/Disk_Partitioning_Setup_common-warning-para-1.xml | 10
en-US/Disk_Partitioning_Setup_common-warning-para-2.xml | 10
en-US/Disk_Partitioning_Setup_common-warning-para-3.xml | 10
en-US/Disk_Partitioning_Setup_common-warning-para-4.xml | 10
en-US/Disk_Partitioning_Setup_common-warning-title.xml | 8
en-US/Disk_Partitioning_x86_ppc-note-1.xml | 9
en-US/Editing_Partitions-common.xml | 27 --
en-US/Loopbacktip-common.xml | 14 -
en-US/Trouble_After_Sound.xml | 34 --
40 files changed, 952 deletions(-)
New commits:
commit 665e3490dca248b300c2f245af0398f80455bf0a
Author: Ruediger Landmann <r.landmann(a)redhat.com>
Date: Fri Apr 30 21:50:36 2010 +1000
rm unused xml
diff --git a/en-US/Automatic_Partitioning-x86.xml b/en-US/Automatic_Partitioning-x86.xml
deleted file mode 100644
index 908e9ca..0000000
--- a/en-US/Automatic_Partitioning-x86.xml
+++ /dev/null
@@ -1,60 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<section id="s1-diskpartauto-x86">
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Automatic_Partitioning_common-title.xml"/>
- <!-- Default Layout -->
-
- <!-- Begin Index terms -->
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Automatic_Partitioning_common-indexterm-1.xml"/>
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Automatic_Partitioning_common-indexterm-2.xml"/>
- <!-- End Index terms -->
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Automatic_Partitioning_common-para-1.xml"/>
- <!-- Automatic partitioning allows you to have some ... -->
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Automatic_Partitioning_common-itemizedlist-1.xml"/>
- <!-- Remove all partitions on selected drives and create default layout
- Remove linux partitions on selected drives and create default layout
- Caution
- Use free space on selected drives and create default layout -->
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Automatic_Partitioning_common-figure-1.xml"/>
- <!-- Automatic Partitioning -->
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Automatic_Partitioning_common-para-2.xml"/>
- <!-- Using your mouse, choose the hard drive ... -->
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Automatic_Partitioning_common-caution-1.xml"/>
- <!-- It is always a good idea to back up any data ... -->
-
- <note><title>Note</title>
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Automatic_Partitioning_x86_ppc-tip-para-1.xml"/>
- <!-- If you have a RAID card, be aware that some BIOSes... -->
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Automatic_Partitioning_x86_ppc-tip-para-2.xml"/>
- <!-- A /boot/ partition is also necessary for ... -->
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Automatic_Partitioning_x86_ppc-tip-para-3.xml"/>
- <!-- If you have chosen to automatically partition your system ... -->
- </note>
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Automatic_Partitioning_common-para-5.xml"/>
- <!-- Select Encrypt system to encrypt all partitions... -->
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Automatic_Partitioning_common-para-6.xml"/>
- <!-- Use the Advanced storage options option if... -->
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Automatic_Partitioning_common-para-3.xml"/>
- <!-- To review and make any necessary changes to the partitions... -->
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Automatic_Partitioning_common-note-1.xml"/>
- <!-- Installation in text mode... -->
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Automatic_Partitioning_common-para-4.xml"/>
- <!-- Click Next once you have made your selection... -->
-
-</section>
\ No newline at end of file
diff --git a/en-US/Automatic_Partitioning_common-figure-1.xml
b/en-US/Automatic_Partitioning_common-figure-1.xml
deleted file mode 100644
index e40934c..0000000
--- a/en-US/Automatic_Partitioning_common-figure-1.xml
+++ /dev/null
@@ -1,13 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE figure PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<figure float="0"><title>Create Default Layout</title>
- <mediaobject>
- <imageobject><imagedata fileref="images/diskpartauto/autopart.png"
format="PNG"/></imageobject>
- <textobject><para>
- Automatic partitioning.
- </para>
- </textobject>
- </mediaobject>
-</figure>
\ No newline at end of file
diff --git a/en-US/Automatic_Partitioning_common-itemizedlist-1.xml
b/en-US/Automatic_Partitioning_common-itemizedlist-1.xml
deleted file mode 100644
index 1346057..0000000
--- a/en-US/Automatic_Partitioning_common-itemizedlist-1.xml
+++ /dev/null
@@ -1,46 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE itemizedlist PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<itemizedlist>
- <listitem>
- <para>
- <guilabel>Use entire drive</guilabel> — select this option to
remove all partitions on your hard drive(s) (this includes partitions created by other
operating systems such as Windows VFAT or NTFS partitions).
- </para>
- <warning>
- <title>Warning</title>
-
- <para>
- If you select this option, all data on the selected hard drive(s) is removed by the
installation program. Do not select this option if you have information that you want to
keep on the hard drive(s) where you are installing Fedora.
- </para>
- </warning>
- </listitem>
-
- <listitem>
- <para>
- <guilabel>Replace existing Linux system</guilabel> — select this
option to remove only Linux partitions (partitions created from a previous Linux
installation). This does not remove other partitions you may have on
- your hard drive(s) (such as VFAT or FAT32 partitions).
- </para>
-
-
- </listitem>
-
- <listitem>
- <para>
- <guilabel>Shrink existing system</guilabel> — select this option
to resize your current data and partitions manually and install a default Fedora layout in
the space that is freed.
- </para>
- <warning>
- <title>Warning</title>
-
- <para>
- If you shrink partitions on which other operating systems are installed, you might
not be able to use those operating systems. Although this partitioning option does not
destroy data, operating systems typically require some free space in their partitions.
Before you resize a partition that holds an operating system that you might want to use
again, find out how much space you need to leave free.
- </para>
- </warning>
- </listitem>
-
- <listitem>
- <para>
- <guilabel>Use free space</guilabel> — select this option to
retain your current data and partitions, assuming you have enough free space available on
your hard drive(s).
- </para>
- </listitem>
-</itemizedlist>
\ No newline at end of file
diff --git a/en-US/Automatic_Partitioning_common-para-6.xml
b/en-US/Automatic_Partitioning_common-para-6.xml
deleted file mode 100644
index 3aa1e09..0000000
--- a/en-US/Automatic_Partitioning_common-para-6.xml
+++ /dev/null
@@ -1,26 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-
-<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
- "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
-
- <para>
- Use the <guilabel>Advanced storage options</guilabel> option if:
- <itemizedlist>
- <listitem>
- <para>
- You want to install Fedora to a drive connected through
- the <firstterm>iSCSI</firstterm> protocol. Select
- <guilabel>Advanced storage options</guilabel>, then select
- <guilabel>Add iSCSI target</guilabel>, then select
- <guilabel>Add drive</guilabel>. Provide an IP address and
- the iSCSI initiator name, and select <guilabel>Add
- drive</guilabel>.
- </para>
- </listitem>
- <listitem>
- <para>You want to disable a <firstterm>dmraid</firstterm>
- device that was detected at boot time. <!-- Need more here,
- but how? PWF. --></para>
- </listitem>
- </itemizedlist>
- </para>
diff --git a/en-US/Automatic_Partitioning_common-title.xml
b/en-US/Automatic_Partitioning_common-title.xml
deleted file mode 100644
index 22f94f5..0000000
--- a/en-US/Automatic_Partitioning_common-title.xml
+++ /dev/null
@@ -1,8 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE title PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<title>Create Default Layout</title>
\ No newline at end of file
diff --git a/en-US/Create_Storage-common-itemizedlist-1.xml
b/en-US/Create_Storage-common-itemizedlist-1.xml
deleted file mode 100644
index 2df12a0..0000000
--- a/en-US/Create_Storage-common-itemizedlist-1.xml
+++ /dev/null
@@ -1,17 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE itemizedlist PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<itemizedlist>
- <title>Create Partition</title>
- <para>
- Refer to
- </para>
- <listitem>
- <para>
- <guilabel>Standard Partition</guilabel> — create a standard disk partition
(as described in <xref linkend="ch-partitions-x86"/>) in unallocated
space.
- </para>
- </listitem>
-
-</itemizedlist>
-
diff --git a/en-US/Create_Storage-common-itemizedlist-2.xml
b/en-US/Create_Storage-common-itemizedlist-2.xml
deleted file mode 100644
index 822915a..0000000
--- a/en-US/Create_Storage-common-itemizedlist-2.xml
+++ /dev/null
@@ -1,27 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE itemizedlist PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<itemizedlist>
- <title>Create Software RAID</title>
- <para>
- Refer to
- </para>
- <listitem>
- <para>
- <guilabel>RAID Partition</guilabel> — create a partition in unallocated
space to form part of a software RAID device. To form a software RAID device, two or more
RAID partitions must be available on the system.
- </para>
- </listitem>
- <listitem>
- <para>
- <guilabel>RAID Device</guilabel> — combine two or more RAID partitions
into a software RAID device. When you choose this option, you can specify the type of RAID
device to create (the <firstterm>RAID level</firstterm>. This option is only
available when two or more RAID partitions are available on the system.
- </para>
- </listitem>
- <listitem>
- <para>
- <guilabel>RAID Clone</guilabel> — create a mirror of a RAID partition on
one storage device on another storage device. This option is only available when at least
one RAID partition is available on the system.
- </para>
- </listitem>
-
-</itemizedlist>
-
diff --git a/en-US/Create_Storage-common-itemizedlist-3.xml
b/en-US/Create_Storage-common-itemizedlist-3.xml
deleted file mode 100644
index 04a8c03..0000000
--- a/en-US/Create_Storage-common-itemizedlist-3.xml
+++ /dev/null
@@ -1,27 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE itemizedlist PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<itemizedlist>
- <title>Create LVM</title>
- <para>
- Refer to
- </para>
- <listitem>
- <para>
- <guilabel>LVM Physical Volume</guilabel> — create a
<firstterm>physical volume</firstterm> in unallocated space.
- </para>
- </listitem>
- <listitem>
- <para>
- <guilabel>LVM Volume Group</guilabel> — create a
<firstterm>volume group</firstterm> from one or more physical volumes. This
option is only available when at least one physical volume is available on the system.
- </para>
- </listitem>
- <listitem>
- <para>
- <guilabel>LVM Logical Volume</guilabel> — create a
<firstterm>logical volume</firstterm> on a volume group. This option is only
available when at least one volume group is available on the system.
- </para>
- </listitem>
-
-</itemizedlist>
-
diff --git a/en-US/Deleting_Partitions-x86.xml b/en-US/Deleting_Partitions-x86.xml
deleted file mode 100644
index a60bdac..0000000
--- a/en-US/Deleting_Partitions-x86.xml
+++ /dev/null
@@ -1,25 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<section id="s2-diskpartdelete-x86">
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Deleting_Partitions_x86_ppc-title.xml"/>
- <!-- Deleting Partitions -->
-
- <!-- Begin Index Terms -->
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Deleting_Partitions_x86_ppc-indexterm-1.xml"/>
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Deleting_Partitions_x86_ppc-indexterm-2.xml"/>
- <!-- End Index Terms -->
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Deleting_Partitions_x86_ppc-para-1.xml"/>
- <!-- To delete a partition, highlight it in the ... -->
-
- <para>
- For further installation instructions for x86, AMD64, and <trademark
class="registered">Intel</trademark> 64 systems, skip to <xref
linkend="s1-x86-bootloader"/>.
- </para>
-
- <!-- <para>
- For further installation instructions for Itanium systems, skip to <xref
linkend="s1-netconfig-x86"/>.
- </para> -->
-</section>
diff --git a/en-US/Deleting_Partitions_x86_ppc-indexterm-1.xml
b/en-US/Deleting_Partitions_x86_ppc-indexterm-1.xml
deleted file mode 100644
index 1609f03..0000000
--- a/en-US/Deleting_Partitions_x86_ppc-indexterm-1.xml
+++ /dev/null
@@ -1,9 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE indexterm PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<indexterm significance="normal">
- <primary><application>Partitioning</application>
- </primary>
- <secondary>deleting partitions</secondary>
-</indexterm>
\ No newline at end of file
diff --git a/en-US/Deleting_Partitions_x86_ppc-indexterm-2.xml
b/en-US/Deleting_Partitions_x86_ppc-indexterm-2.xml
deleted file mode 100644
index 8fc165b..0000000
--- a/en-US/Deleting_Partitions_x86_ppc-indexterm-2.xml
+++ /dev/null
@@ -1,11 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE indexterm PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<indexterm significance="normal">
- <primary>partitioning</primary>
- <secondary>deleting</secondary>
-</indexterm>
\ No newline at end of file
diff --git a/en-US/Deleting_Partitions_x86_ppc-para-1.xml
b/en-US/Deleting_Partitions_x86_ppc-para-1.xml
deleted file mode 100644
index ca3043d..0000000
--- a/en-US/Deleting_Partitions_x86_ppc-para-1.xml
+++ /dev/null
@@ -1,10 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<para>
- To delete a partition, highlight it in the <guilabel>Partitions</guilabel>
section and click the <guibutton>Delete</guibutton> button. Confirm the
deletion when prompted.
-</para>
\ No newline at end of file
diff --git a/en-US/Deleting_Partitions_x86_ppc-title.xml
b/en-US/Deleting_Partitions_x86_ppc-title.xml
deleted file mode 100644
index 8fc5013..0000000
--- a/en-US/Deleting_Partitions_x86_ppc-title.xml
+++ /dev/null
@@ -1,8 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE title PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<title>Deleting a Partition</title>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Disk_Druid-listitem-LVM.xml
b/en-US/Disk_Partitioning_Disk_Druid-listitem-LVM.xml
deleted file mode 100644
index a7b576b..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid-listitem-LVM.xml
+++ /dev/null
@@ -1,48 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<listitem>
- <para>
- <guibutton>LVM</guibutton>: Allows you to create an LVM logical volume. The
role of LVM (Logical Volume Manager) is to present a simple logical view of underlying
physical storage space, such as a hard drive(s). LVM manages individual physical disks
— or to be more precise, the individual partitions present on them.
<emphasis>It should only be used if you have experience using LVM.</emphasis>
<!-- Reference to RHEL Deployment Guide: To read more about LVM, refer to the
<citetitle>Red Hat Enterprise Linux Deployment Guide</citetitle>.--> Note,
LVM is only available in the graphical installation program.
- </para>
-
- <para>
- To assign one or more physical volumes to a volume group,
- first name the volume group. Then select the physical
- volumes to be used in the volume group. Finally, configure
- logical volumes on any volume groups using the
- <guilabel>Add</guilabel>, <guilabel>Edit</guilabel> and
- <guilabel>Delete</guilabel> options.
- </para>
- <para>
- You may not remove a physical volume from a volume group if
- doing so would leave insufficient space for that group's
- logical volumes. Take for example a volume group made up of
- two 5 GB LVM physical volume partitions, which contains an 8
- GB logical volume. The installer would not allow you to
- remove either of the component physical volumes, since that
- would leave only 5 GB in the group for an 8 GB logical
- volume. If you reduce the total size of any logical volumes
- appropriately, you may then remove a physical volume from
- the volume group. In the example, reducing the size of the
- logical volume to 4 GB would allow you to remove one of the
- 5 GB physical volumes.
- </para>
- <important>
- <title>LVM Unavailable in Text Installs</title>
- <para>LVM initial set up is not available in a text-mode
- installation. The installer allows you to edit
- pre-configured LVM volumes. If you need to create an LVM
- configuration from scratch, hit <keycombo>
- <keycap function="alt">Alt</keycap>
- <keycap function="other"
otherfunction="F2">F2</keycap>
- </keycombo> to use the terminal, and run the
- <command>lvm</command> command. To return to the
- text-mode installation, hit <keycombo>
- <keycap function="alt">Alt</keycap>
- <keycap function="other"
otherfunction="F1">F1</keycap>
- </keycombo>.</para>
- </important>
-
-</listitem>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Disk_Druid-listitem-delete.xml
b/en-US/Disk_Partitioning_Disk_Druid-listitem-delete.xml
deleted file mode 100644
index 37f3ef5..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid-listitem-delete.xml
+++ /dev/null
@@ -1,17 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<listitem>
- <para>
- <guibutton>Delete</guibutton>: Used to remove the partition currently
highlighted in the <guilabel>Current Disk Partitions</guilabel> section. You
will be asked to confirm the deletion of any partition.
- </para>
- <para>To delete an LVM
- physical volume, first delete any volume groups of which
- that physical volume is a member.
- </para>
- <para>
- If you make a mistake, use the <guilabel>Reset</guilabel>
- option to abandon all the changes you have made.
- </para>
-</listitem>
diff --git a/en-US/Disk_Partitioning_Disk_Druid-listitem-makeraid.xml
b/en-US/Disk_Partitioning_Disk_Druid-listitem-makeraid.xml
deleted file mode 100644
index cc7d7ba..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid-listitem-makeraid.xml
+++ /dev/null
@@ -1,114 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<listitem>
- <para>
- <guibutton>RAID</guibutton>: Used to provide redundancy to any or all disk
partitions. <emphasis>It should only be used if you have experience using
RAID.</emphasis> <!-- Reference to RHEL Deployment Guide: To read more about
RAID, refer to the <citetitle>Red Hat Enterprise Linux Deployment
Guide</citetitle>. -->
- </para>
-
- <para>
- To make a RAID device, you must first create software RAID partitions. Once you have
created two or more software RAID partitions, select
<guibutton>RAID</guibutton> to join the software RAID partitions into a RAID
device.
- </para>
-
- <warning>
- <title>Intel BIOS-RAID</title>
- <para>
- In Fedora 12, <application>anaconda</application> uses
<application>mdraid</application> instead of
<application>dmraid</application> to access Intel BIOS-RAID sets that use the
Intel Matrix Storage Manager metadata format.
<application>Mdraid</application> supports Intel Matrix Storage Manager RAID
0, RAID 1, RAID 5, and RAID 10 sets.
- </para>
- <para>
- If you have Intel BIOS-RAID sets on your system that use the Intel Matrix Storage
Manager metadata format and you upgrade from a previous version of Fedora, the device node
names will change. Therefore, take special precautions when upgrading systems that
incorporate this hardware.
- </para>
- <para>
- By default, Fedora does not refer to these devices by their device node names, but
uses UUID, so you should not encounter problems if you upgrade a system with a default
Fedora installations.
- </para>
- <para>
- However, on installations with local modifications to
<filename>/etc/fstab</filename>,
<filename>/etc/crypttab</filename>, or to other configuration files which
refer to device node names, you must manually edit the affected files to refer to the
devices by UUID instead of by device node path. You can use the output of the
<command>blkid</command> command to obtain the UUIDs of the devices on your
system.
- </para>
- </warning>
-
- <figure float="0"
id="fig-diskpart-makeraid-x86"><title>RAID options</title>
- <mediaobject>
- <imageobject><imagedata
fileref="images/diskpartitioning/raid-options.png"
format="PNG"/></imageobject>
- <textobject><para>
- The RAID options dialog.
- </para>
- </textobject>
- </mediaobject>
- </figure>
-
- <variablelist>
- <varlistentry>
- <term><guilabel>Create a software RAID
- partition</guilabel></term>
- <listitem>
- <para>
- Choose this option to add a partition for software
- RAID. This option is the only choice available if your
- disk contains no software RAID partitions.
- </para>
-
- <figure float="0"
id="fig-diskpart-software-raid-x86"><title>Create a software RAID
partition</title>
- <mediaobject>
- <imageobject><imagedata
fileref="images/diskpartitioning/software-raid.png"
format="PNG"/></imageobject>
- <textobject><para>
- The create a software RAID partition dialog.
- </para>
- </textobject>
- </mediaobject>
- </figure>
-
-
- </listitem>
- </varlistentry>
-
-
- <varlistentry>
- <term><guilabel>Create a RAID
device</guilabel></term>
- <listitem>
- <para>
- Choose this option to construct a RAID device from two
- or more existing software RAID partitions. This option
- is available if two or more software RAID partitions
- have been configured.
- </para>
-
- <figure float="0"
id="fig-diskpart-raid-device-x86"><title>Create a RAID
device</title>
- <mediaobject>
- <imageobject><imagedata
fileref="images/diskpartitioning/raid-device.png"
format="PNG"/></imageobject>
- <textobject><para>
- The create a RAID device dialog.
- </para>
- </textobject>
- </mediaobject>
- </figure>
-
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term><guilabel>Clone a drive to create a RAID
- device</guilabel></term>
- <listitem>
- <para>
- Choose this option to set up a RAID
- <firstterm>mirror</firstterm> of an existing disk.
- This option is available if two or more disks are
- attached to the system.
- </para>
-
- <figure float="0"
id="fig-diskpart-clone-raid-x86"><title>Clone a RAID
device</title>
- <mediaobject>
- <imageobject><imagedata
fileref="images/diskpartitioning/raid-clone.png"
format="PNG"/></imageobject>
- <textobject><para>
- The clone a RAID device dialog.
- </para>
- </textobject>
- </mediaobject>
- </figure>
-
- </listitem>
- </varlistentry>
- </variablelist>
-
-</listitem>
diff --git a/en-US/Disk_Partitioning_Disk_Druid-listitem-reset.xml
b/en-US/Disk_Partitioning_Disk_Druid-listitem-reset.xml
deleted file mode 100644
index ea1f0e2..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid-listitem-reset.xml
+++ /dev/null
@@ -1,9 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<listitem>
- <para>
- <guibutton>Reset</guibutton>: Used to restore the partitioning screen to
its original state. All changes made will be lost if you
<guibutton>Reset</guibutton> the partitions.
- </para>
-</listitem>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Disk_Druid-x86-indexterm-1.xml
b/en-US/Disk_Partitioning_Disk_Druid-x86-indexterm-1.xml
deleted file mode 100644
index 42b0017..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid-x86-indexterm-1.xml
+++ /dev/null
@@ -1,8 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE indexterm PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<indexterm significance="normal">
- <primary>RAID</primary>
- <secondary>creating a software RAID</secondary>
-</indexterm>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Disk_Druid-x86-indexterm-2.xml
b/en-US/Disk_Partitioning_Disk_Druid-x86-indexterm-2.xml
deleted file mode 100644
index 38d3d22..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid-x86-indexterm-2.xml
+++ /dev/null
@@ -1,8 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE indexterm PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<indexterm significance="normal">
- <primary>RAID</primary>
- <secondary>partitioning a RAID</secondary>
-</indexterm>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Disk_Druid-x86.xml
b/en-US/Disk_Partitioning_Disk_Druid-x86.xml
deleted file mode 100644
index 399b288..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid-x86.xml
+++ /dev/null
@@ -1,48 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<section id="s2-diskpartitioning-dd-x86">
-
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Disk_Partitioning_Disk_Druid_common-title.xml"/>
- <!-- The partitioning screen -->
-
- <!-- Index terms -->
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Disk_Partitioning_Disk_Druid_common-indexterm-1.xml"/>
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Disk_Partitioning_Disk_Druid-x86-indexterm-1.xml"/>
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Disk_Partitioning_Disk_Druid-x86-indexterm-2.xml"/>
- <!-- End Index terms -->
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Disk_Partitioning_Disk_Druid_common-para-1.xml"/>
- <!--These buttons are used... -->
-
- <itemizedlist>
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml"/>
- <!-- New: Used to request a new partition -->
-
- <listitem>
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Disk_Partitioning_Disk_Druid_common_listitem-para-1.xml"/>
- <!-- Edit: Used to modify attributes of the partition -->
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Disk_Partitioning_Disk_Druid_x86_ppc-listitem-para-2.xml"/>
- <!-- You can also edit free space as represented in... -->
- </listitem>
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Disk_Partitioning_Disk_Druid_x86_ppc-listitem-2.xml"/>
- <!-- To make a RAID device, you must first create... -->
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Disk_Partitioning_Disk_Druid-listitem-delete.xml"/>
- <!-- Delete: Used to remove the partition... -->
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Disk_Partitioning_Disk_Druid-listitem-reset.xml"/>
- <!-- Reset: Used to restore Disk Druid to its original state... -->
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Disk_Partitioning_Disk_Druid-listitem-makeraid.xml"/>
- <!-- RAID: Used to provide redundancy ... -->
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Disk_Partitioning_Disk_Druid-listitem-LVM.xml"/>
- <!-- LVM: Allows you to create an LVM logical volume. -->
-
- </itemizedlist>
-</section>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Disk_Druid_common-indexterm-1.xml
b/en-US/Disk_Partitioning_Disk_Druid_common-indexterm-1.xml
deleted file mode 100644
index 2ccce8b..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid_common-indexterm-1.xml
+++ /dev/null
@@ -1,9 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE indexterm PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<indexterm significance="normal">
- <primary><application>Partitioning</application>
- </primary>
- <secondary>buttons</secondary>
-</indexterm>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Disk_Druid_common-para-1.xml
b/en-US/Disk_Partitioning_Disk_Druid_common-para-1.xml
deleted file mode 100644
index def25fb..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid_common-para-1.xml
+++ /dev/null
@@ -1,8 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<para>
- These buttons are used to change the attributes of a partition (for example the file
system type and mount point) and also to create RAID devices. Buttons on this screen are
- also used to accept the changes you have made, or to exit the partitioning screen. For
further explanation, take a look at each button in order:
-</para>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Disk_Druid_common-title.xml
b/en-US/Disk_Partitioning_Disk_Druid_common-title.xml
deleted file mode 100644
index f74cd9b..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid_common-title.xml
+++ /dev/null
@@ -1,5 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE title PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<title>The partitioning screen</title>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Disk_Druid_common_listitem-para-1.xml
b/en-US/Disk_Partitioning_Disk_Druid_common_listitem-para-1.xml
deleted file mode 100644
index e610040..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid_common_listitem-para-1.xml
+++ /dev/null
@@ -1,11 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<para>
- <guibutton>Edit</guibutton>: Used to modify attributes of the partition
currently selected in the <guilabel>Partitions</guilabel> section. Selecting
<guibutton>Edit</guibutton> opens a dialog box. Some
- or all of the fields can be edited, depending on whether the partition information has
already been written to disk.
-</para>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml
b/en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml
deleted file mode 100644
index 439db1c..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml
+++ /dev/null
@@ -1,125 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<listitem>
- <para>
- <guibutton>New</guibutton>: Select this option to add a partition
- or LVM physical
- volume to the disk. In the <guilabel>Add
- partition</guilabel> dialog, choose a mount point and a
- partition type. If you have more than one disk on the
- system, choose which disks the partition may inhabit.
- Indicate a size in megabytes for the partition. If you
- wish to encrypt the partition, select that option.
- </para>
- <important>
- <title>Illegal Partitions</title>
-
- <para>
- <indexterm>
- <primary>partition</primary>
- <secondary>illegal</secondary>
- </indexterm> You cannot create separate partitions for the
<filename>/bin/</filename>,
- <filename>/dev/</filename>, <filename>/etc/</filename>,
- <filename>/lib/</filename>, <filename>/proc/</filename>,
- <filename>/root/</filename>, and
- <filename>/sbin/</filename> directories. These directories must reside
on the
- <indexterm>
- <primary>partition</primary>
- <secondary>root</secondary>
- </indexterm> <filename>/</filename> (root) partition.
- </para>
-
- <para>
- The <filename>/boot</filename> partition may not reside on
- an LVM volume group. Create the <filename>/boot</filename>
- partition before configuring any volume groups. Furthermore, you cannot use the
btrfs file system for the <filename>/boot</filename> partition.
- </para>
-
- <para>
- Avoid placing <filename>/usr</filename> on a separate partition. If
<filename>/usr</filename> does not reside on the
<filename>/</filename> (root) partition, the boot process becomes more complex
and some systems (for example, those with iSCSI storage) will fail to boot.
- </para>
-
- </important>
- <para>
- You may also choose from three options for sizing your
- partition:
- </para>
- <variablelist>
- <varlistentry>
- <term><guilabel>Fixed size</guilabel></term>
- <listitem>
- <para>
- Use a fixed size as close to your entry as possible.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term><guilabel>Fill all space up
to</guilabel></term>
- <listitem>
- <para>
- Grow the partition to a maximum size of your choice.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term><guilabel>Fill to maximum allowable
- size</guilabel></term>
- <listitem>
- <para>
- Grow the partition until it fills the remainder of the
- selected disks.
- </para>
- </listitem>
- </varlistentry>
- </variablelist>
- <note>
- <title>Partition Sizes</title>
-
- <para>
- The actual partition on the disk may be slightly smaller
- or larger than your choice. Disk geometry issues cause
- this effect, not an error or bug.
- </para>
- </note>
- <para>
- Select the <guilabel>Encrypt partition</guilabel> option to
- encrypt all information on the disk partition.
- </para>
- <para>
- After you enter the details for your partition, select
- <guibutton>OK</guibutton> to continue. If you chose to
- encrypt the partition, the installer prompts you to assign a
- passphrase by typing it twice. For hints on using good
- passphrases, refer to <xref
linkend="sn-account_configuration"/>.
- </para>
- </listitem>
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
diff --git a/en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-2.xml
b/en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-2.xml
deleted file mode 100644
index 670d691..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-2.xml
+++ /dev/null
@@ -1,13 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<listitem>
- <para>
- To make a RAID device, you must first create (or reuse existing) software RAID
partitions. Once you have created two or more software RAID partitions, select
<guibutton>Make RAID</guibutton> to join the software RAID partitions into a
- RAID device.
- </para>
-</listitem>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-para-2.xml
b/en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-para-2.xml
deleted file mode 100644
index 8a5014d..0000000
--- a/en-US/Disk_Partitioning_Disk_Druid_x86_ppc-listitem-para-2.xml
+++ /dev/null
@@ -1,11 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE listitem PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<para>
- You can also edit free space as represented in the graphical display to create a new
partition within that space. Either highlight the free space and then select the
<guibutton>Edit</guibutton> button, or double-click on the free space to
- edit it.
-</para>
diff --git a/en-US/Disk_Partitioning_Fields-common.xml
b/en-US/Disk_Partitioning_Fields-common.xml
deleted file mode 100644
index 3216c74..0000000
--- a/en-US/Disk_Partitioning_Fields-common.xml
+++ /dev/null
@@ -1,60 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<section>
- <title>Partition Fields</title>
-
- <para>
- Above the partition hierarchy are labels which present information about the partitions
you are creating. The labels are defined as follows:
- </para>
-
- <itemizedlist>
- <listitem>
- <para>
- <guilabel>Device</guilabel>: This field displays the partition's
device name.
- </para>
- </listitem>
-
- <listitem>
- <para>
- <guilabel>Mount Point/RAID/Volume</guilabel>: A mount point is the
location within the directory hierarchy at which a volume exists; the volume is
"mounted" at this location. This field indicates where the partition is mounted.
If a
- partition exists, but is not set, then you need to define its mount point.
Double-click on the partition or click the <guibutton>Edit</guibutton>
button.
- </para>
- </listitem>
-
- <listitem>
- <para>
- <guilabel>Type</guilabel>: This field shows the partition's file
system type (for example, ext2, ext3, ext4, or vfat).
- </para>
- </listitem>
-
- <listitem>
- <para>
- <guilabel>Format</guilabel>: This field shows if the partition being
created will be formatted.
- </para>
- </listitem>
-
- <listitem>
- <para>
- <guilabel>Size (MB)</guilabel>: This field shows the partition's size
(in MB).
- </para>
- </listitem>
-
- <listitem>
- <para>
- <guilabel>Start</guilabel>: This field shows the cylinder on your hard
drive where the partition begins.
- </para>
- </listitem>
-
- <listitem>
- <para>
- <guilabel>End</guilabel>: This field shows the cylinder on your hard
drive where the partition ends.
- </para>
- </listitem>
- </itemizedlist>
-
- <para>
- <guilabel>Hide RAID device/LVM Volume Group members</guilabel>: Select this
option if you do not want to view any RAID device or LVM Volume Group members that have
been created.
- </para>
-</section>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Graphical-x86.xml
b/en-US/Disk_Partitioning_Graphical-x86.xml
deleted file mode 100644
index 4e5e82c..0000000
--- a/en-US/Disk_Partitioning_Graphical-x86.xml
+++ /dev/null
@@ -1,20 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<section>
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Disk_Partitioning_Graphical_x86_ppc-title.xml"/>
- <!-- Title: Graphical Display of Hard Drives -->
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Disk_Partitioning_Graphical_x86_ppc-para-1.xml"/>
- <!-- The partitioning screen offers a graphical representation... -->
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Disk_Partitioning_Graphical_common-para-1.xml"/>
- <!-- Using your mouse, click once to highlight a particular field... -->
-
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
href="Disk_Partitioning_Graphical_common-para-2.xml"/>
- <!-- Using your mouse, click once to highlight a particular field... -->
-
-</section>
-
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Graphical_x86_ppc-title.xml
b/en-US/Disk_Partitioning_Graphical_x86_ppc-title.xml
deleted file mode 100644
index bcb55a4..0000000
--- a/en-US/Disk_Partitioning_Graphical_x86_ppc-title.xml
+++ /dev/null
@@ -1,8 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE title PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<title>Graphical Display of Hard Drive(s)</title>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Setup_common-warning-1.xml
b/en-US/Disk_Partitioning_Setup_common-warning-1.xml
deleted file mode 100644
index ace5575..0000000
--- a/en-US/Disk_Partitioning_Setup_common-warning-1.xml
+++ /dev/null
@@ -1,11 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE warning PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<warning>
- <title>Warning</title>
-
- <para>
- The <!-- (RHEL) <application>Red Hat Update Agent</application> -->
<application>PackageKit</application> update software downloads updated
packages to <filename>/var/cache/yum/</filename> by default. If you partition
the system manually, and create a separate <filename>/var/</filename>
partition, be sure to create the partition large enough (3.0 GB or more) to download
package updates.
- </para>
-</warning>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Setup_common-warning-para-1.xml
b/en-US/Disk_Partitioning_Setup_common-warning-para-1.xml
deleted file mode 100644
index df19e88..0000000
--- a/en-US/Disk_Partitioning_Setup_common-warning-para-1.xml
+++ /dev/null
@@ -1,10 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<para>
- If you receive an error after the <guilabel>Disk Partitioning
Setup</guilabel> phase of the installation saying something similar to:
- </para>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Setup_common-warning-para-2.xml
b/en-US/Disk_Partitioning_Setup_common-warning-para-2.xml
deleted file mode 100644
index 3d35450..0000000
--- a/en-US/Disk_Partitioning_Setup_common-warning-para-2.xml
+++ /dev/null
@@ -1,10 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<para>
- "The partition table on device hda was unreadable. To create new partitions it must
be initialized, causing the loss of ALL DATA on this drive."
-</para>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Setup_common-warning-para-3.xml
b/en-US/Disk_Partitioning_Setup_common-warning-para-3.xml
deleted file mode 100644
index a17d19e..0000000
--- a/en-US/Disk_Partitioning_Setup_common-warning-para-3.xml
+++ /dev/null
@@ -1,10 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<para>
- you may not have a partition table on that drive or the partition table on the drive may
not be recognizable by the partitioning software used in the installation program.
-</para>
diff --git a/en-US/Disk_Partitioning_Setup_common-warning-para-4.xml
b/en-US/Disk_Partitioning_Setup_common-warning-para-4.xml
deleted file mode 100644
index bf47421..0000000
--- a/en-US/Disk_Partitioning_Setup_common-warning-para-4.xml
+++ /dev/null
@@ -1,10 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<para>
- No matter what type of installation you are performing, backups of the existing data on
your systems should always be made.
-</para>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_Setup_common-warning-title.xml
b/en-US/Disk_Partitioning_Setup_common-warning-title.xml
deleted file mode 100644
index 12f418f..0000000
--- a/en-US/Disk_Partitioning_Setup_common-warning-title.xml
+++ /dev/null
@@ -1,8 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE title PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-
-
-
-]>
-
-<title>Warning</title>
\ No newline at end of file
diff --git a/en-US/Disk_Partitioning_x86_ppc-note-1.xml
b/en-US/Disk_Partitioning_x86_ppc-note-1.xml
deleted file mode 100644
index 9db1744..0000000
--- a/en-US/Disk_Partitioning_x86_ppc-note-1.xml
+++ /dev/null
@@ -1,9 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE note PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<note>
- <para>
- Please note that in the text mode installation it is not possible to work with LVM
(Logical Volumes) beyond viewing the existing setup. LVM can only be set up during
graphical installation.
- </para>
-</note>
\ No newline at end of file
diff --git a/en-US/Editing_Partitions-common.xml b/en-US/Editing_Partitions-common.xml
deleted file mode 100644
index 57799a0..0000000
--- a/en-US/Editing_Partitions-common.xml
+++ /dev/null
@@ -1,27 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<section>
- <title>Editing Partitions</title>
- <indexterm significance="normal">
- <primary><application>Partitioning</application>
- </primary>
- <secondary>editing partitions</secondary>
- </indexterm>
- <indexterm significance="normal">
- <primary>partitioning</primary>
- <secondary>editing</secondary>
- </indexterm>
- <para>
- To edit a partition, select the <guibutton>Edit</guibutton> button or
double-click on the existing partition.
- </para>
-
- <note>
- <title>Note</title>
-
- <para>
- If the partition already exists on your disk, you can only change the partition's
mount point. To make any other changes, you must delete the partition and recreate it.
- </para>
- </note>
-</section>
diff --git a/en-US/Loopbacktip-common.xml b/en-US/Loopbacktip-common.xml
deleted file mode 100644
index 8255f45..0000000
--- a/en-US/Loopbacktip-common.xml
+++ /dev/null
@@ -1,14 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE tip PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<note><title>Note</title>
-<para>
- You can save disk space by using the ISO images you have already copied to the server.
To accomplish this, install Fedora using ISO images without copying them into a single
tree by loopback mounting them. For each ISO image:
-</para>
-<para><command>mkdir
disc<replaceable>X</replaceable></command></para>
-<para><command>mount -o loop
Fedora&PRODVER;-disc<replaceable>X</replaceable>.iso
disc<replaceable>X</replaceable></command></para>
-
-
-<para>Replace <command>X</command> with the corresponding disc
number.</para>
-</note>
diff --git a/en-US/Trouble_After_Sound.xml b/en-US/Trouble_After_Sound.xml
deleted file mode 100644
index 226578c..0000000
--- a/en-US/Trouble_After_Sound.xml
+++ /dev/null
@@ -1,34 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
-]>
-
-<section id="s2-trouble-sound">
- <title>Problems with Sound Configuration</title>
- <indexterm significance="normal">
- <primary>troubleshooting</primary>
- <secondary>after the installation</secondary>
- <tertiary>sound configuration</tertiary>
- </indexterm>
- <para>
- If, for some reason, you do not hear sound and know that you do have a sound card
installed, you can run the <application moreinfo="none">Sound Card
Configuration Tool</application> (<command
moreinfo="none">system-config-soundcard</command>) utility.
- </para>
-
- <para>
- To use the <application moreinfo="none">Sound Card Configuration
Tool</application>, choose <guimenu moreinfo="none">Main
Menu</guimenu> => <guimenuitem moreinfo="none">System
</guimenuitem> => <guimenuitem moreinfo="none">Administration
</guimenuitem> => <guimenuitem moreinfo="none">Soundcard
- Detection</guimenuitem> in GNOME, or <guimenu
moreinfo="none">Main Menu</guimenu> => <guimenuitem
moreinfo="none">Computer </guimenuitem> => <guimenuitem
moreinfo="none">System Settings</guimenuitem> => <guimenuitem
moreinfo="none">Multimedia</guimenuitem> in KDE. A small text box pops
up prompting you for your root password.
- </para>
-
- <para>
- You can also type the <command
moreinfo="none">system-config-soundcard</command> command at a shell
prompt to launch the <application moreinfo="none">Sound Card Configuration
Tool</application>. If you are not root, it prompts you for the root password
- to continue.
- </para>
-
- <!-- <para>
- To run the text-based configuration tool, as root, type <command
moreinfo="none">sndconfig</command> in a terminal window. Note, the
<command moreinfo="none">sndconfig</command> application is not
installed by default but can be found on the Red Hat
- Enterprise Linux CD-ROMs.
- </para> -->
-
- <para>
- If the <application moreinfo="none">Sound Card Configuration
Tool</application> does not work (if the sample does not play and you still do not
have audio sounds), it is likely that your sound card is not yet supported in Fedora.
- </para>
-</section>
5134
days inactive
5134
days old
docs-commits@lists.fedoraproject.org
0 comments
1 participants
participants (1)
-
Rüdiger Landmann