Allow sysaccount to view its own entry
by Adam Bishop
I have a piece of software that tries to look up its own uid to check that LDAP is correctly configured.
This check fails because the sysaccount cannot view anything under cn=etc,cn=sysaccounts.
Is there an existing permission/privilege that I can use to allow it to read the sysaccounts tree (or better, just its own entry)?
Many Thanks,
Adam Bishop
1 month
kinit: KDC can't fulfill requested option while renewing credentials - which approach?
by Pieter Baele
I tried various approached to get Renewable tickets :
modifying the kdc
modifying krb5.conf
using kadmin.local on every replica to modify the principal; which is not
working - as designed (?)- in IPA
What should I do to get a ticket with the correct R flag from IPA ?
I don't think this is SSSD related (the service needing the renewable
ticket this way is Apache Storm)
Thanks a lot!
2 months, 3 weeks
Do keytabs expire?
by Ronald Wimmer
Hi,
today I found out that some entries in a keytab file seemed to have expired:
Request ticket server HTTP/mwc.linux.mydomain.at(a)LINUX.MYDOMAIN.AT kvno
4 not found in keytab; keytab is likely out of date
Fetching the keytab again with ipa-getkeytab fixed the problem. But why
is this happening? Do keytab entries expire? I have not set any custom
password or ticket policies.
Regards,
Ronald
6 months, 1 week
ipa-replica-install -- cannot get past [26/41]: creating DS keytab
by Jonathon Jenkins
Greetings,
I cannot get the ipa-replica-install to proceed past step 26/41 - creating DS keytab. I see the command that is to be run, and I can run that just fine before and after the ipa-replica-install command, and it creates the keytab. I am not sure how to proceed from here - the bug reports I see all pertain to earlier versions, and my files reflect those changes.
I have also tried running this with all manner of password flags, which are correct, but still getting insufficient access rights.
particulars:
centos 7 3.10.0-957.1.3.el7.x86_64
ipa-server-4.6.4-10.el7.centos.x86_64
ipa-common-4.6.4-10.el7.centos.noarch
ipa-server-common-4.6.4-10.el7.centos.noarch
ipa-client-4.6.4-10.el7.centos.x86_64
ipa-server-dns-4.6.4-10.el7.centos.noarch
ipa-client-common-4.6.4-10.el7.centos.noarch
* Note: anonymized output below
ipapython.ipautil: DEBUG stderr=
ipalib.backend: DEBUG Created connection context.ldap2_139891568509776
ipaserver.install.service: DEBUG duration: 7 seconds
ipaserver.install.service: DEBUG [26/41]: creating DS keytab
[26/41]: creating DS keytab
ipalib.frontend: DEBUG raw: service_add(u'ldap/<ipa-replica-host>@<domain>.NET', force=True, version=u'2.229')
ipalib.frontend: DEBUG service_add(ipapython.kerberos.Principal('ldap/<ipa-replica-host>@<domain>.NET'), force=True, all=False, raw=False, version=u'2.229', no_members=False)
ipalib.frontend: DEBUG raw: host_show(u'<ipa-replica-host>', version=u'2.229')
ipalib.frontend: DEBUG host_show(u'<ipa-replica-host>', rights=False, all=False, raw=False, version=u'2.229', no_members=False)
ipalib.install.sysrestore: DEBUG Backing up system configuration file '/etc/dirsrv/ds.keytab'
ipalib.install.sysrestore: DEBUG -> Not backing up - '/etc/dirsrv/ds.keytab' doesn't exist
ipapython.ipautil: DEBUG Starting external process
ipapython.ipautil: DEBUG args=/usr/sbin/ipa-getkeytab -k /etc/dirsrv/ds.keytab -p ldap/<ipa-replica-host>@<domain>.NET -H ldaps://<ipa-replica-master>
ipapython.ipautil: DEBUG Process finished, return code=9
ipapython.ipautil: DEBUG stdout=
ipapython.ipautil: DEBUG stderr=Failed to parse result: Insufficient access rights
Retrying with pre-4.0 keytab retrieval method...
Failed to parse result: Insufficient access rights
Failed to get keytab!
Failed to get keytab
ipaserver.install.service: DEBUG Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", line 570, in start_creation
run_step(full_msg, method)
File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", line 560, in run_step
method()
File "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line 1308, in request_service_keytab
super(DsInstance, self).request_service_keytab()
File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", line 742, in request_service_keytab
self.run_getkeytab(self.api.env.ldap_uri, self.keytab, self.principal)
File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", line 732, in run_getkeytab
ipautil.run(args, nolog=nolog)
File "/usr/lib/python2.7/site-packages/ipapython/ipautil.py", line 562, in run
raise CalledProcessError(p.returncode, arg_string, str(output))
CalledProcessError: Command '/usr/sbin/ipa-getkeytab -k /etc/dirsrv/ds.keytab -p ldap/<ipa-replica-host>@<domain>.NET -H ldaps://<ipa-replica-master>' returned non-zero exit status 9
ipaserver.install.service: DEBUG [error] CalledProcessError: Command '/usr/sbin/ipa-getkeytab -k /etc/dirsrv/ds.keytab -p ldap/<ipa-replica-host>@<domain>.NET -H ldaps://<ipa-replica-master>' returned non-zero exit status 9
[error] CalledProcessError: Command '/usr/sbin/ipa-getkeytab -k /etc/dirsrv/ds.keytab -p ldap/<ipa-replica-host>@<domain>.NET -H ldaps://<ipa-replica-master>' returned non-zero exit status 9
ipalib.backend: DEBUG Destroyed connection context.ldap2_139891548583120
ipalib.install.sysrestore: DEBUG Backing up system configuration file '/etc/ipa/default.conf'
ipalib.install.sysrestore: DEBUG Saving Index File to '/var/lib/ipa/sysrestore/sysrestore.index'
Your system may be partly configured.
Run /usr/sbin/ipa-server-install --uninstall to clean up.
ipapython.admintool: DEBUG File "/usr/lib/python2.7/site-packages/ipapython/admintool.py", line 178, in execute
return_value = self.run()
File "/usr/lib/python2.7/site-packages/ipapython/install/cli.py", line 319, in run
return cfgr.run()
File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 364, in run
return self.execute()
File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 389, in execute
for rval in self._executor():
File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 434, in __runner
exc_handler(exc_info)
File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 463, in _handle_execute_exception
self._handle_exception(exc_info)
File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 453, in _handle_exception
six.reraise(*exc_info)
File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 424, in __runner
step()
File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 421, in <lambda>
step = lambda: next(self.__gen)
File "/usr/lib/python2.7/site-packages/ipapython/install/util.py", line 81, in run_generator_with_yield_from
six.reraise(*exc_info)
File "/usr/lib/python2.7/site-packages/ipapython/install/util.py", line 59, in run_generator_with_yield_from
value = gen.send(prev_value)
File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 658, in _configure
next(executor)
File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 434, in __runner
exc_handler(exc_info)
File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 463, in _handle_execute_exception
self._handle_exception(exc_info)
File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 521, in _handle_exception
self.__parent._handle_exception(exc_info)
File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 453, in _handle_exception
six.reraise(*exc_info)
File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 518, in _handle_exception
super(ComponentBase, self)._handle_exception(exc_info)
File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 453, in _handle_exception
six.reraise(*exc_info)
File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 424, in __runner
step()
File "/usr/lib/python2.7/site-packages/ipapython/install/core.py", line 421, in <lambda>
step = lambda: next(self.__gen)
File "/usr/lib/python2.7/site-packages/ipapython/install/util.py", line 81, in run_generator_with_yield_from
six.reraise(*exc_info)
File "/usr/lib/python2.7/site-packages/ipapython/install/util.py", line 59, in run_generator_with_yield_from
value = gen.send(prev_value)
File "/usr/lib/python2.7/site-packages/ipapython/install/common.py", line 65, in _install
for unused in self._installer(self.parent):
File "/usr/lib/python2.7/site-packages/ipaserver/install/server/__init__.py", line 622, in main
replica_install(self)
File "/usr/lib/python2.7/site-packages/ipaserver/install/server/replicainstall.py", line 406, in decorated
func(installer)
File "/usr/lib/python2.7/site-packages/ipaserver/install/server/replicainstall.py", line 1431, in install
fstore=fstore)
File "/usr/lib/python2.7/site-packages/ipaserver/install/server/replicainstall.py", line 113, in install_replica_ds
setup_pkinit=not options.no_pkinit,
File "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line 419, in create_replica
self.start_creation(runtime=30)
File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", line 570, in start_creation
run_step(full_msg, method)
File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", line 560, in run_step
method()
File "/usr/lib/python2.7/site-packages/ipaserver/install/dsinstance.py", line 1308, in request_service_keytab
super(DsInstance, self).request_service_keytab()
File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", line 742, in request_service_keytab
self.run_getkeytab(self.api.env.ldap_uri, self.keytab, self.principal)
File "/usr/lib/python2.7/site-packages/ipaserver/install/service.py", line 732, in run_getkeytab
ipautil.run(args, nolog=nolog)
File "/usr/lib/python2.7/site-packages/ipapython/ipautil.py", line 562, in run
raise CalledProcessError(p.returncode, arg_string, str(output))
ipapython.admintool: DEBUG The ipa-replica-install command failed, exception: CalledProcessError: Command '/usr/sbin/ipa-getkeytab -k /etc/dirsrv/ds.keytab -p ldap/<ipa-replica-host>@<domain>.NET -H ldaps://<ipa-replica-master>' returned non-zero exit status 9
ipapython.admintool: ERROR Command '/usr/sbin/ipa-getkeytab -k /etc/dirsrv/ds.keytab -p ldap/<ipa-replica-host>@<domain>.NET -H ldaps://<ipa-replica-master>' returned non-zero exit status 9
ipapython.admintool: ERROR The ipa-replica-install command failed. See /var/log/ipareplica-install.log for more information
8 months, 2 weeks
Removal & clean up certificates from o=ipaca
by David Goudet
Hello all,
I have to clean up lot of useless certificate in dirsrv database.
Because of resubmit loop on Certmonger client, i have 99,9% of certificate in dirsrv database that are useless and not obsolete (expiration in 2020) (it represent ~85 000 certificates).
These useless certificates produce some issues on FreeIPA:
- decrease FreeIPA performances on CLI and GUI
- increase the LDAP size
- increase size and time of FreeIPA backup
...
Is it possible to purge these certificates in dirsrv database and how?
I found two branches in LDAP directory about these certificates:
dn: cn=xxx,ou=ca,ou=requests,o=ipaca
dn: cn=yyy,ou=certificateRepository,ou=ca,o=ipaca
I can remove all requests and certificates entry from dirsrv database but how it is supported by PKI manager Dogtag (CRL, certificate generation, OCSP)?
(This topic has already been discuss on https://lists.fedorahosted.org/archives/list/freeipa-users@lists.fedoraho...)
Thank you for you help
--
David GOUDET
LYRA NETWORK
IT Operations service
Tel : +33 (0)5 32 09 09 74 | Poste : 574
10 months
Problem running IPA client on IPv6 only connection
by William Muriithi
Hello,
I have an IPA clients that has both IPv4 and IPv6 addresses. One of the
IPA client is in the office and hence can reach the IPA server on both IPv4
and IPv6. However, the client outside the LAN can only reach the IPA server
over IPv6.
I was able to enroll the external client fine over IPv6 and from the logs,
all clean. However, when I attempted to ssh, its not able to retreave the
user from IPA. The client in the office works fine. I can also make for
example LDAP queries and they work over IPv6 fine. It looks like kerberos
is somehow however using IPv4. I reached this conclusion after taking a
tcpdump when attempting to ssh to the server and the kerberos traffic from
the client to IPA is on IPv4.
What would I need to do on the IPA client for it to prefer IPv6? I am
aware I could remove IPv4 address from DNS, but that would break any
communication from IPv4 only systems. Any assistance would be appreaciated.
[william@ansible ~]$ ssh root(a)mars.external.example.com
Last login: Mon Jan 7 17:19:49 2019 from 65.98.193.94
[root@mars ~]# kinit admin
kinit: Cannot contact any KDC for realm 'EXTERNAL.EXAMPLE.COM
<http://external.example.com/>' while getting initial credentials
[root@mars ~]# ldapsearch -x -b
cn=ftp,cn=groups,cn=compat,dc=external,dc=example,dc=com | tail -n 4
result: 0 Success
# numResponses: 2
# numEntries: 1
[root@mars ~]# cat /etc/resolv.conf
search external.example.com
nameserver 2607:4860:6000:a::5
[root@mars ~]#
Regards,
William
1 year, 4 months
freeipa/certmonger for openvpn user certificates
by Patrick Spinler
Hi,
I'm setting up an openvpn server and I'd like to use our already existing FreeIPA CA to issue user keys/certs for openvpn's use. Since our OpenVPN box is a freeipa client, I thought it'd be nice to use certmonger to issue and keep up to date these certs.
Ergo, I've created a certificate profile:
pat@apex-freeipa ~$ ipa certprofile-show --all OpenVPNUserCert
dn: cn=OpenVPNUserCert,cn=certprofiles,cn=ca,dc=int,dc=apexmw,dc=com
Profile ID: OpenVPNUserCert
Profile description: OpenVPN User Certificates
Store issued certificates: FALSE
objectclass: ipacertprofile, top
And also a CA acl. For experimentation (and working vs our test freeipa) I've left this as wide open as I can:
[pat@apex-freeipa ~]$ ipa caacl-show --all OpenVPN_User_Certificate_ACL
dn: ipaUniqueID=6dde33a6-7849-11e9-aa05-525400b52c7b,cn=caacls,cn=ca,dc=int,dc=apexmw,dc=com
ACL name: OpenVPN_User_Certificate_ACL
Enabled: TRUE
CA category: all
Profile category: all
User category: all
Host category: all
Service category: all
ipauniqueid: 6dde33a6-7849-11e9-aa05-525400b52c7b
objectclass: ipaassociation, ipacaacl
Then, on my openvpn server, I ask for a cert for use for one of my users (myself, in this case):
root@apex-openvpn:~# ipa-getcert request -f /etc/openvpn/client/pat.crt -k /etc/openvpn/client/pat.key -r -N 'CN=pat,O=INT.APEXMW.COM' -K pat -g 4096 --profile OpenVPNUserCert
New signing request "20190603014016" added.
But, it fails due to an access err vs the 'userCertificate' attribute of my account:
root@apex-openvpn:~# ipa-getcert list
(...snippy snip excess...)
Request ID '20190603014016':
status: CA_REJECTED
ca-error: Server at https://apex-freeipa.int.apexmw.com/ipa/xml denied our request, giving up: 2100 (RPC failed at server. Insufficient access: Insufficient 'write' privilege to the 'userCertificate' attribute of entry 'uid=pat,cn=users,cn=accounts,dc=int,dc=apexmw,dc=com'.).
stuck: yes
key pair storage: type=FILE,location='/etc/openvpn/client/pat.key'
certificate: type=FILE,location='/etc/openvpn/client/pat.crt'
CA: IPA
issuer:
subject:
expires: unknown
pre-save command:
post-save command:
track: yes
auto-renew: yes
If I look at the dirsrv log, here's the accesses I see for this request (trimmed off the date/time to make the lines a _little_ shorter):
root@apex-freeipa slapd-INT-APEXMW-COM# grep conn=178 access | cut -d' ' -f3-
conn=178 fd=114 slot=114 connection from 10.10.200.1 to 10.10.200.1
conn=178 op=0 BIND dn="" method=sasl version=3 mech=GSS-SPNEGO
conn=178 op=0 RESULT err=0 tag=97 nentries=0 etime=0.0025554208 dn="fqdn=apex-openvpn.int.apexmw.com,cn=computers,cn=accounts,dc=int,dc=apexmw,dc=com"
conn=178 op=1 SRCH base="cn=ipaconfig,cn=etc,dc=int,dc=apexmw,dc=com" scope=0 filter="(objectClass=*)" attrs=ALL
conn=178 op=1 RESULT err=0 tag=101 nentries=1 etime=0.0001319554
conn=178 op=2 SRCH base="cn=masters,cn=ipa,cn=etc,dc=int,dc=apexmw,dc=com" scope=2 filter="(&(objectClass=ipaConfigObject)(cn=CA))" attrs=ALL
conn=178 op=2 RESULT err=0 tag=101 nentries=1 etime=0.0000979573
conn=178 op=3 SRCH base="cn=masters,cn=ipa,cn=etc,dc=int,dc=apexmw,dc=com" scope=2 filter="(&(objectClass=ipaConfigObject)(cn=CA))" attrs=ALL
conn=178 op=3 RESULT err=0 tag=101 nentries=1 etime=0.0000736730
conn=178 op=4 SRCH base="cn=cas,cn=ca,dc=int,dc=apexmw,dc=com" scope=2 filter="(&(objectClass=ipaca)(cn=ipa))" attrs=""
conn=178 op=4 RESULT err=0 tag=101 nentries=1 etime=0.0000499142
conn=178 op=5 SRCH base="cn=ipa,cn=cas,cn=ca,dc=int,dc=apexmw,dc=com" scope=0 filter="(objectClass=*)" attrs="ipaCaId ipaCaSubjectDN cn ipaCaIssuerDN description"
conn=178 op=5 RESULT err=0 tag=101 nentries=1 etime=0.0000482726
conn=178 op=6 SRCH base="cn=apex-freeipa.int.apexmw.com,cn=masters,cn=ipa,cn=etc,dc=int,dc=apexmw,dc=com" scope=2 filter="(&(objectClass=ipaConfigObject)(ipaConfigString=enabledService)(cn=CA))" attrs=ALL
conn=178 op=6 RESULT err=0 tag=101 nentries=1 etime=0.0000950646 notes=U
conn=178 op=7 SRCH base="cn=accounts,dc=int,dc=apexmw,dc=com" scope=2 filter="(&(objectClass=krbprincipalaux)(krbPrincipalName=pat(a)INT.APEXMW.COM))" attrs=ALL
conn=178 op=7 RESULT err=0 tag=101 nentries=1 etime=0.0002747849
conn=178 op=8 EXT oid="1.3.6.1.4.1.4203.1.11.3" name="whoami-plugin"
conn=178 op=8 RESULT err=0 tag=120 nentries=0 etime=0.0000135034
conn=178 op=9 SRCH base="cn=request certificate ignore caacl,cn=virtual operations,cn=etc,dc=int,dc=apexmw,dc=com" scope=0 filter="(objectClass=*)" attrs="objectClass"
conn=178 op=9 RESULT err=0 tag=101 nentries=1 etime=0.0000932668 - entryLevelRights: none
conn=178 op=10 SRCH base="uid=pat,cn=users,cn=accounts,dc=int,dc=apexmw,dc=com" scope=0 filter="(objectClass=*)" attrs="distinguishedName"
conn=178 op=10 RESULT err=0 tag=101 nentries=1 etime=0.0000640289
conn=178 op=11 SRCH base="uid=pat,cn=users,cn=accounts,dc=int,dc=apexmw,dc=com" scope=0 filter="(objectClass=*)" attrs="telephoneNumber ipaSshPubKey uid krbCanonicalName ipatokenRadiusUserName ipaUserAuthType krbPrincipalExpiration homeDirectory nsAccountLock usercertificate;binary title loginShell uidNumber mail ipaCertMapData memberOf memberofindirect krbPrincipalName givenName gidNumber sn ou userClass ipatokenRadiusConfigLink"
conn=178 op=11 RESULT err=0 tag=101 nentries=1 etime=0.0001401737
conn=178 op=12 SRCH base="dc=int,dc=apexmw,dc=com" scope=2 filter="(|(member=uid=pat,cn=users,cn=accounts,dc=int,dc=apexmw,dc=com)(memberUser=uid=pat,cn=users,cn=accounts,dc=int,dc=apexmw,dc=com)(memberHost=uid=pat,cn=users,cn=accounts,dc=int,dc=apexmw,dc=com))" attrs=""
conn=178 op=12 RESULT err=0 tag=101 nentries=7 etime=0.0001492344 notes=P pr_idx=0 pr_cookie=-1
conn=178 op=13 SRCH base="uid=pat,cn=users,cn=accounts,dc=int,dc=apexmw,dc=com" scope=0 filter="(userPassword=*)" attrs="userPassword"
conn=178 op=13 RESULT err=0 tag=101 nentries=1 etime=0.0000524838
conn=178 op=14 SRCH base="uid=pat,cn=users,cn=accounts,dc=int,dc=apexmw,dc=com" scope=0 filter="(krbPrincipalKey=*)" attrs="krbPrincipalKey"
conn=178 op=14 RESULT err=0 tag=101 nentries=1 etime=0.0000597589
conn=178 op=15 SRCH base="ipaUniqueID=80b23b30-6a0c-11e9-baa3-525400b52c7b,cn=sudorules,cn=sudo,dc=int,dc=apexmw,dc=com" scope=0 filter="(objectClass=*)" attrs="cn"
conn=178 op=15 RESULT err=0 tag=101 nentries=1 etime=0.0000379744
conn=178 op=16 SRCH base="ipaUniqueID=5fb3a640-705a-11e9-aa05-525400b52c7b,cn=hbac,dc=int,dc=apexmw,dc=com" scope=0 filter="(objectClass=*)" attrs="cn"
conn=178 op=16 RESULT err=0 tag=101 nentries=1 etime=0.0000337904
conn=178 op=17 SRCH base="cn=caacls,cn=ca,dc=int,dc=apexmw,dc=com" scope=1 filter="(&(objectClass=ipaassociation)(objectClass=ipacaacl))" attrs="serviceCategory cn ipaMemberCertProfile ipaMemberCa ipaCertProfileCategory memberUser userCategory hostCategory memberHost ipaEnabledFlag ipaCaCategory memberService description"
conn=178 op=17 RESULT err=0 tag=101 nentries=2 etime=0.0001647058
conn=178 op=18 EXT oid="1.3.6.1.4.1.4203.1.11.3" name="whoami-plugin"
conn=178 op=18 RESULT err=0 tag=120 nentries=0 etime=0.0000138321
conn=178 op=19 SRCH base="uid=pat,cn=users,cn=accounts,dc=int,dc=apexmw,dc=com" scope=0 filter="(objectClass=*)" attrs="userCertificate"
conn=178 op=19 RESULT err=0 tag=101 nentries=1 etime=0.0001475052 - entryLevelRights: none
conn=178 op=20 UNBIND
conn=178 op=20 fd=114 closed - U1
To begin with, I note that this session does a BIND with 'dn=""', right at the beginning, it's essentially an anonymous bind, yah?
That operation near the end, here:
op=17 SRCH base="cn=caacls,cn=ca,dc=int,dc=apexmw,dc=com" scope=1 filter="(&(objectClass=ipaassociation)(objectClass=ipacaacl))"
seems like it might be kinda key. and indeed, if I attempt to run this by hand as an anonymous bind, I get no results:
root@apex-freeipa slapd-INT-APEXMW-COM# ldapsearch -x -h localhost -b dc=int,dc=apexmw,dc=com -s sub "(|(objectClass=ipaassociation)(objectClass=ipacaacl))"
# extended LDIF
#
# LDAPv3
# base <dc=int,dc=apexmw,dc=com> with scope subtree
# filter: (|(objectClass=ipaassociation)(objectClass=ipacaacl))
# requesting: ALL
#
# search result
search: 2
result: 0 Success
# numResponses: 1
It's only if I run this as an _authenticated_ bind, that I can find my ACL:
root@apex-freeipa slapd-INT-APEXMW-COM# ldapsearch -x -D "cn=Directory Manager" -W -h localhost -b dc=int,dc=apexmw,dc=com -s sub "(&(objectClass=ipaassociation)(objectClass=ipacaacl))" cn
Enter LDAP Password:
# extended LDIF
#
# LDAPv3
# base <dc=int,dc=apexmw,dc=com> with scope subtree
# filter: (&(objectClass=ipaassociation)(objectClass=ipacaacl))
# requesting: cn
#
# c98b740c-6903-11e9-ad1b-525400b52c7b, caacls, ca, int.apexmw.com
dn: ipaUniqueID=c98b740c-6903-11e9-ad1b-525400b52c7b,cn=caacls,cn=ca,dc=int,dc
=apexmw,dc=com
cn: hosts_services_caIPAserviceCert
# 6dde33a6-7849-11e9-aa05-525400b52c7b, caacls, ca, int.apexmw.com
dn: ipaUniqueID=6dde33a6-7849-11e9-aa05-525400b52c7b,cn=caacls,cn=ca,dc=int,dc
=apexmw,dc=com
cn: OpenVPN_User_Certificate_ACL
# search result
search: 2
result: 0 Success
# numResponses: 3
# numEntries: 2
Is this (using certmonger to auto-issue signed certs/keys for my openvpn users) going to be essentially impossible to do, here? Do I need to go a more traditional route of creating a seperate keystore/certdb, issuing a CSR, and feeding that to FreeIPA to sign?
Any advice appreciated, and thanks in advance,
-- Pat
1 year, 5 months
Broken ipa replica
by Giulio Casella
Hi everyone,
I'm stuck with a broken replica. I had a setup with two ipa server in
replica (ipa-server-4.6.4 on CentOS 7.6), let's say "idc01" and "idc02".
Due to heavy load idc01 crashed many times, and was not working anymore.
So I tried to redo the replica again. At first I tried to
"ipa-replica-manage re-initialize", with no success.
Now I'm trying to redo from scratch the replica setup: on idc02 I
removed the segments (ipa topologysegment-del, for both ca and domain
suffix), on idc01 I removed everything (ipa-server-install --uninstall),
then I joined domain (ipa-client-install), and everything is working so far.
When doing "ipa-replica-install" on idc01 I get:
[...]
[28/41]: setting up initial replication
Starting replication, please wait until this has completed.
Update in progress, 22 seconds elapsed
[ldap://idc02.my.dom.ain:389] reports: Update failed! Status: [Error
(-11) connection error: Unknown connection error (-11) - Total update
aborted]
And on idc02 (the working server), in
/var/log/dirsrv/slapd-MY-DOM-AIN/errors I find lines stating:
[20/Mar/2019:09:28:06.545187923 +0100] - INFO - NSMMReplicationPlugin -
repl5_tot_run - Beginning total update of replica
"agmt="cn=meToidc01.my.dom.ain" (idc01:389)".
[20/Mar/2019:09:28:26.528046160 +0100] - ERR - NSMMReplicationPlugin -
perform_operation - agmt="cn=meToidc01.my.dom.ain" (idc01:389): Failed
to send extended operation: LDAP error -1 (Can't contact LDAP server)
[20/Mar/2019:09:28:26.530763939 +0100] - ERR - NSMMReplicationPlugin -
repl5_tot_log_operation_failure - agmt="cn=meToidc01.my.dom.ain"
(idc01:389): Received error -1 (Can't contact LDAP server): for total
update operation
[20/Mar/2019:09:28:26.532678072 +0100] - ERR - NSMMReplicationPlugin -
release_replica - agmt="cn=meToidc01.my.dom.ain" (idc01:389): Unable to
send endReplication extended operation (Can't contact LDAP server)
[20/Mar/2019:09:28:26.534307539 +0100] - ERR - NSMMReplicationPlugin -
repl5_tot_run - Total update failed for replica
"agmt="cn=meToidc01.my.dom.ain" (idc01:389)", error (-11)
[20/Mar/2019:09:28:26.561763168 +0100] - INFO - NSMMReplicationPlugin -
bind_and_check_pwp - agmt="cn=meToidc01.my.dom.ain" (idc01:389):
Replication bind with GSSAPI auth resumed
[20/Mar/2019:09:28:26.582389258 +0100] - WARN - NSMMReplicationPlugin -
repl5_inc_run - agmt="cn=meToidc01.my.dom.ain" (idc01:389): The remote
replica has a different database generation ID than the local database.
You may have to reinitialize the remote replica, or the local replica.
It seems that idc02 remembers something about the old replica.
Any hint?
Thank you in advance,
Giulio
1 year, 7 months
IPA CA allow CSR SAN names in external domains
by Steve Dainard
Hello
I have a RHEL7 IPA server installed as a subordinate CA. I'd like to be
able to add SAN's for a different dns domain than exists in the IPA realm.
The dns for 'otherdomain.com' is handled by active directory which my IPA
server has a cross-forest trust with.
ie:
host: client1.ipadomain.com
certificate: CN = client1.ipadomain.com, SAN = client1.ipadomain.com,
servicename.otherdomain.com
When I try to submit this CSR with 'ipa-getcert request' the IPA server
denies with: "The service principal for subject alt name
servicename.otherdomain.com in certificate request does not exist"
It seems that the default CAACL enforces a profile named
'caIPAserviceCert', but I'm having some trouble determining what can be
modified (or cloned and changed in a new profile) that would allow the CA
to sign a CSR that contains *.ipadomain.com and *.otherdomain.com in the
SAN.
This is the only section in the profile that contains SAN:
policyset.serverCertSet.12.constraint.class_id=noConstraintImpl
policyset.serverCertSet.12.constraint.name=No Constraint
policyset.serverCertSet.12.default.class_id=commonNameToSANDefaultImpl
policyset.serverCertSet.12.default.name=Copy Common Name to Subject
Alternative Name
Thanks,
Steve
1 year, 9 months
freeipa with sudo and 2FA (OTP)
by John Ratliff
I'm trying to setup freeipa with OTP. I created a TOTP under my user in
freeipa and updated my user to use 2FA (password + OTP).
When I try to do sudo, it only asks for my password and it fails every
time (presumably because it isn't getting the OTP first).
I didn't see anything useful in the sss_sudo logs, even after adding
debug_level = 6 in the config.
What can I do to further troubleshoot this?
Thanks.
1 year, 10 months
