8:14 p.m.
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2019-ccf415061e
2019-05-21 01:13:12.142096
--------------------------------------------------------------------------------
Name : calamares
Product : Fedora 28
Version : 3.2.8
Release : 3.fc28
URL : https://calamares.io/
Summary : Installer from a live CD/DVD/USB to disk
Description :
Calamares is a distribution-independent installer framework, designed to install
from a live CD/DVD/USB environment to a hard disk. It includes a graphical
installation program based on Qt 5. This package includes the Calamares
framework and the required configuration files to produce a working replacement
for Anaconda's liveinst.
--------------------------------------------------------------------------------
Update Information:
An update of Calamares to version 3.2.8. See https://calamares.io/ for the many
changes since the previously packaged version 3.1.8. In particular, UEFI "Secure
Boot" is now supported. In addition to the changes listed by upstream, the
following fixes for critical Calamares bugs specifically affecting Fedora were
upstreamed into Calamares 3.2.8: * A critical bug where it would fail to mount
`/dev/mapper/live-base` (for unpacking into the target) was fixed. (There were
in fact 2 bugs: 1. the loop device `/dev/mapper/live-base` would get
accidentally destroyed by the `ClearMountsJob` in the `partition` module (a
regression in 3.2.x), and 2. the mounting in the `mount` module would fail to
mount it due to the mount flags used (a bug that also affected the previous
Fedora package, known to affect at least Fedora ��� 29; it is unknown whether an
updated Fedora 28 is also affected or not).) * An issue where Fedora ��� 30
systems installed with Calamares and with SELinux enabled would fail to start
`dbus-broker` due to an SELinux labeling issue was fixed. This also affects
Fedora 28 installations if they are later upgraded to Fedora ��� 30 (and the
workaround is to relabel `/dev` manually). In addition, in the Calamares
package included in this update: * The "Secure Boot" `shim` support was fixed
to create `/boot/efi/EFI/fedora/grub.cfg` using `grub2-mkconfig`, so that UEFI
installations are actually bootable. (This fix will be included in Calamares
3.2.9.) * The optional `calamares-webview` subpackage is now built against
QtWebKit rather than QtWebEngine because QtWebEngine no longer accepts running
as `root` without workarounds (and unfortunately, Calamares still needs to run
as `root`). * Calamares has a new `calamares-plasmalnf` subpackage with the
optional (disabled by default) `plasmalnf` module that allows configuring the
Plasma look&feel. The module is optional because it depends on Plasma.
--------------------------------------------------------------------------------
ChangeLog:
* Sun May 12 2019 Kevin Kofler <Kevin(a)tigcc.ticalc.org> - 3.2.8-3
- bootloader: shim-grub-cfg patch: fix destination path for grub.cfg
- default-settings patch: fix warnings due to missing or unimplemented settings
* Sun May 12 2019 Kevin Kofler <Kevin(a)tigcc.ticalc.org> - 3.2.8-2
- bootloader: fix sb-shim mode to write grub.cfg into the EFI System Partition
* Fri May 10 2019 Kevin Kofler <Kevin(a)tigcc.ticalc.org> - 3.2.8-1
- Update to 3.2.8
- Rebase default-settings patch, disable GeoIP that is now enabled by default
- Drop upstreamed boost-python3, unpackfs-dev,
dont-unmount-dev-mapper-live-base, and mount-selinux patches
* Wed May 8 2019 Kevin Kofler <Kevin(a)tigcc.ticalc.org> - 3.2.7-10
- mount: copy the SELinux context of the host directory to the mountpoint
* Wed May 8 2019 Kevin Kofler <Kevin(a)tigcc.ticalc.org> - 3.2.7-9
- Revert the change from "-8", this cannot be done with shellprocess
* Wed May 8 2019 Kevin Kofler <Kevin(a)tigcc.ticalc.org> - 3.2.7-8
- default-settings patch: enable the shellprocess module to create the mount
point directories on the / partition with the correct SELinux contexts
* Mon May 6 2019 Kevin Kofler <Kevin(a)tigcc.ticalc.org> - 3.2.7-7
- default-settings patch: update the log path in umount.conf
* Mon May 6 2019 Kevin Kofler <Kevin(a)tigcc.ticalc.org> - 3.2.7-6
- Fix branding logos to use the correct form factor for each variant
- partition: do not unmount /dev/mapper/live-* (live-base needed in unpackfs)
* Sun May 5 2019 Kevin Kofler <Kevin(a)tigcc.ticalc.org> - 3.2.7-5
- Drop the grub2-efi*-modules dependencies, not needed with sb-shim support
- Add Requires: efibootmgr instead, used by the sb-shim support
- default-settings patch: disable the new libpwquality check by default
* Sun May 5 2019 Kevin Kofler <Kevin(a)tigcc.ticalc.org> - 3.2.7-4
- unpackfs: do not use -o loop if the source is a device (fails on F29+)
* Sun May 5 2019 Kevin Kofler <Kevin(a)tigcc.ticalc.org> - 3.2.7-3
- Add BuildRequires: parted-devel (used in welcome to check storage requirement)
* Sun May 5 2019 Kevin Kofler <Kevin(a)tigcc.ticalc.org> - 3.2.7-2
- Fix finding Boost::Python3 on F30+
- Only BuildRequire libatasmart-devel and libblkid-devel on F29-
* Sun May 5 2019 Kevin Kofler <Kevin(a)tigcc.ticalc.org> - 3.2.7-1
- Update to 3.2.7 and update BuildRequires and Requires
- Add plasmalnf subpackage for the new plasmalnf module requiring plasma-desktop
- Switch webview from QtWebEngine to QtWebKit to work around upstream issue 1051
- Rebase default-settings patch and update some settings:
- enable INSTALL_CONFIG by default (we patch it in place, so install it)
- disable plymouthcfg by default (now only needed to change the default theme)
- bootloader.conf: enable sb-shim (UEFI "Secure Boot" support)
- plasmalnf.conf (note: module disabled by default): fix default liveuser
- plasmalnf.conf (note: module disabled by default): default: show all themes
- tracking.conf (note: module disabled by default): default tracking to none
- users.conf: default to honoring the default shell from /etc/default/useradd
- welcome.conf: use https for internetCheckUrl (catches more captive portals)
- Rebase kdesu patch
* Thu Jan 31 2019 Fedora Release Engineering <releng(a)fedoraproject.org> - 3.1.8-13
- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
* Thu Jan 24 2019 Jonathan Wakely <jwakely(a)redhat.com> - 3.1.8-12
- Rebuilt for Boost 1.69
* Mon Jan 14 2019 Bj��rn Esser <besser82(a)fedoraproject.org> - 3.1.8-11
- Rebuilt for libcrypt.so.2 (#1666033)
* Thu Jul 12 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 3.1.8-10
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jun 19 2018 Miro Hron��ok <mhroncok(a)redhat.com> - 3.1.8-9
- Rebuilt for Python 3.7
--------------------------------------------------------------------------------
This update can be installed with the "dnf" update program. Use
su -c 'dnf upgrade --advisory FEDORA-2019-ccf415061e' at the command
line. For more information, refer to the dnf documentation available at
http://dnf.readthedocs.io/en/latest/command_ref.html#upgrade-command-label
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------