Installing suds-jurko

[Matthew Ashton]

I'm having the worst time trying to install this fork..

(suds-jurko)mpc:~/Documents/suds-jurko$ easy_install suds-jurko
Searching for suds-jurko
Reading http://pypi.python.org/simple/suds-jurko/
Reading https://bitbucket.org/jurko/suds
Best match: suds-jurko 0.4.1.jurko.4
Downloading
https://bitbucket.org/jurko/suds/downloads/suds-jurko-0.4.1.jurko.4.tar.bz2
Processing suds-jurko-0.4.1.jurko.4.tar.bz2
Running suds-jurko-0.4.1.jurko.4/setup.py -q bdist_egg --dist-dir
/tmp/easy_install-kTovJQ/suds-jurko-0.4.1.jurko.4/egg-dist-tmp-Lr5DRJ
Searching for distribute
Reading http://pypi.python.org/simple/distribute/
Reading http://packages.python.org/distribute
Best match: distribute 0.6.45
Downloading
http://pypi.python.org/packages/source/d/distribute/distribute-0.6.45.tar...
Processing distribute-0.6.45.tar.gz
Running distribute-0.6.45/setup.py -q bdist_egg --dist-dir
/tmp/easy_install-kTovJQ/suds-jurko-0.4.1.jurko.4/temp/easy_install-TcMpSO/distribute-0.6.45/egg-dist-tmp-XeHbmj
Before install bootstrap.
Scanning installed packages
Setuptools installation detected at
./Documents/suds-jurko/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg
Egg installation
Patching...
Renaming
./Documents/suds-jurko/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg
to
./Documents/suds-jurko/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg.OLD.1371144330.21
Patching complete.
Relaunching...
Before install bootstrap.
Scanning installed packages
Setuptools installation detected at
./Documents/suds-jurko/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg
Egg installation
Already patched.
After install bootstrap.
Creating
./Documents/suds-jurko/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg-info
Creating ./Documents/suds-jurko/lib/python2.7/site-packages/setuptools.pth
Moving distribute-0.6.45-py2.7.egg to
/tmp/easy_install-kTovJQ/suds-jurko-0.4.1.jurko.4

Installed
/tmp/easy_install-kTovJQ/suds-jurko-0.4.1.jurko.4/distribute-0.6.45-py2.7.egg
./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/sandbox.py:60:
UserWarning: Module pkg_resources was already imported from
./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/pkg_resources.py,
but
/tmp/easy_install-kTovJQ/suds-jurko-0.4.1.jurko.4/distribute-0.6.45-py2.7.egg
is being added to sys.path
./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/sandbox.py:60:
UserWarning: Module setuptools was already imported from
./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/__init__.py,
but
/tmp/easy_install-kTovJQ/suds-jurko-0.4.1.jurko.4/distribute-0.6.45-py2.7.egg
is being added to sys.path
Traceback (most recent call last):
  File "./Documents/suds-jurko/bin/easy_install", line 8, in <module>
    load_entry_point('setuptools==0.6c11', 'console_scripts',
'easy_install')()
  File
"./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/command/easy_install.py",
line 1712, in main
  File
"./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/command/easy_install.py",
line 1700, in with_ei_usage
  File
"./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/command/easy_install.py",
line 1716, in <lambda>
  File "/usr/lib/python2.7/distutils/core.py", line 152, in setup
    dist.run_commands()
  File "/usr/lib/python2.7/distutils/dist.py", line 953, in run_commands
    self.run_command(cmd)
  File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command
    cmd_obj.run()
  File
"./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/command/easy_install.py",
line 211, in run
  File
"./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/command/easy_install.py",
line 446, in easy_install
  File
"./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/command/easy_install.py",
line 476, in install_item
  File
"./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/command/easy_install.py",
line 655, in install_eggs
  File
"./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/command/easy_install.py",
line 930, in build_and_install
  File
"./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/command/easy_install.py",
line 919, in run_setup
  File
"./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/sandbox.py",
line 62, in run_setup
  File
"./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/sandbox.py",
line 105, in run
  File
"./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/sandbox.py",
line 64, in <lambda>
  File "setup.py", line 161, in <module>
  File "/usr/lib/python2.7/distutils/core.py", line 152, in setup
    dist.run_commands()
  File "/usr/lib/python2.7/distutils/dist.py", line 953, in run_commands
    self.run_command(cmd)
  File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command
    cmd_obj.run()
  File
"./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/command/bdist_egg.py",
line 167, in run
  File "/usr/lib/python2.7/distutils/cmd.py", line 326, in run_command
    self.distribution.run_command(command)
  File "/usr/lib/python2.7/distutils/dist.py", line 972, in run_command
    cmd_obj.run()
  File
"./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/command/egg_info.py",
line 177, in run
  File
"./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/command/egg_info.py",
line 252, in find_sources
  File
"./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/command/egg_info.py",
line 306, in run
  File
"./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/command/egg_info.py",
line 330, in add_defaults
  File
"./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/command/sdist.py",
line 199, in add_defaults
  File "/usr/lib/python2.7/distutils/cmd.py", line 311, in
get_finalized_command
    cmd_obj = self.distribution.get_command_obj(command, create)
  File "/usr/lib/python2.7/distutils/dist.py", line 845, in get_command_obj
    klass = self.get_command_class(command)
  File
"./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/setuptools/dist.py",
line 395, in get_command_class
  File
"./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg/pkg_resources.py",
line 1954, in load
zipimport.ZipImportError: bad local file header in
./Documents/suds-jurko/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg


and then from there, usually my pip install is messed up

(suds-jurko)mpc:~/Documents/suds-jurko$ pip
Traceback (most recent call last):
  File "/./Documents/suds-jurko/bin/pip", line 5, in <module>
    from pkg_resources import load_entry_point
ImportError: No module named pkg_resources


pip version 1.0.2
on Ubuntu 12.10

[Jurko Gospodnetić]

   Hi.

On 13.6.2013. 19:31, Matthew Ashton wrote:
>  I'm having the worst time trying to install this fork.. 
   Sorry to hear that, and unfortunately I have no idea what is going on 
there. :-)

   As I said in a private message to you - try to get find me on Skype 
when you read this and perhaps we can take a look.

   I would suggest installing the package manually from its sources. 
Just download the latest sources from the Hg repository on BitBucket 
into some folder. Then go to that folder and run 'python setup.py install'.

   That should set everything up into site-packages of the used Python 
distribution without any side-affects from easy-install or pip. Then if 
the installation problem is reproduced - you have something simpler to 
analyse, and if it is not - you have a working installation you can test 
things on and you can still debug the packaged installation separately 
(you can for instance easily use setup.py to package the current sources 
into the a new distribution package and test with that to see if the 
problem affects only the old version or if it affects a version based on 
the current sources as well).

   Hope this helps.

   Best regards,
     Jurko Gospodnetić

[Jurko Gospodnetić]

   Hi.

>  I'm having the worst time trying to install this fork.. 
   If you have the time, please try installing the version from the 
sources found in the BitBucket Hg repository.

   The latest changes there updated the setup procedure to depend on the 
latest setuptools version instead of the now deprecated 'distribute' 
package. Perhaps that may clean up some of the problems you've encountered.

   Hope this helps.

   Best regards,
     Jurko Gospodnetić

[Matthew Ashton]

Awesome! It works and installs correctly now :)

On Tue, Jun 18, 2013 at 7:08 PM, Jurko Gospodnetić <jurko.gospodnetic(a)pke.hr
>  wrote: 
>    Hi.
>
>
>   I'm having the worst time trying to install this fork..
> >
>
>    If you have the time, please try installing the version from the sources
>  found in the BitBucket Hg repository.
>
>    The latest changes there updated the setup procedure to depend on the
>  latest setuptools version instead of the now deprecated 'distribute'
>  package. Perhaps that may clean up some of the problems you've encountered.
>
>
>    Hope this helps.
>
>    Best regards,
>      Jurko Gospodnetić
>
>

[Jurko Gospodnetić]

   Hi.

>  Awesome! It works and installs correctly now :) 
   Yippie!!! :-)

   Best regards,
     Jurko Gospodnetić