마음 같아선 더 많이 하고 싶은데 워낙 타자가 느리고.. 근무중에 몰래 하는 일이라... -_-;
여튼 오늘 할당량은 다 했는데...
요 며칠 사이에 십시일반으로 모은게 꽤 될것 같은데, 어떤가요? 아직 갈길이 먼가요?
# ======================================================== #: ltrace-0.3.10-5.i386.rpm:1005 ltrace-0.3.10-5.src.rpm:1005
Ltrace is a debugging program that runs a specified command until the\n command exits. While the command is executing, ltrace intercepts and\n records both the dynamic library calls called by the executed process\n and the signals received by the executed process. Ltrace can also\n intercept and print system calls executed by the process.
Ltrace 는 지정한 명령이 종료 할때까지 그 명령을 수행하는 디버깅 프로그램 입니다. 명령이 수행되는 동안 ltrace 는 실행되는 프로세스의 동적 라이브러 리 호출과 프로세스가 받는 시그널들을 잡아서 기록합니다. ltrace 는 또한 프로세스가 실행하는 인쇄 시스템 호출도 잡을수 있습니다.
# ======================================================== #: lv-4.49.4-1.i386.rpm:1005 lv-4.49.4-1.src.rpm:1005
The lv utility is a file viewer. Lv can decode and encode multilingual\n streams using many coding systems: ISO-8859, ISO-2022, EUC, SJIS,\n Big5, HZ, and Unicode. It recognizes multi-byte patterns as regular\n expressions and also provides multilingual grep. Additionally, lv can\n recognize ANSI escape sequences for text decoration.
lv 는 파일 뷰어 입니다. Lv 는 SO-8859, ISO-2022, EUC, SJIS, Big5, HZ, Unicode 등 여러 코딩 시스템을 이용해서 여러국적의 언어로 인코딩하거나 디 코딩 할 수 있으며 멀티바이트 문자로 이루어진 패턴으로된 정규표현식을 인 식할 수 있고 다국적 언어용 grep 을 제공합니다. 덧붙여, lv 는 문자 장식을 위한 ANSI 확장 문자열도 인식할 수 있습니다.
# ======================================================== #: lvm-1.0.3-3.i386.rpm:1005 lvm-1.0.3-3.src.rpm:1005
LVM includes all of the support for handling read/write operations on\n physical volumes (hard disks, RAID-Systems, magneto optical, etc.,\n multiple devices (MD), see mdadd(8) or even loop devices, see\n losetup(8)), creating volume groups (kind of virtual disks) from one\n or more physical volumes and creating one or more logical volumes\n (kind of logical partitions) in volume groups.
LVM 은 물리적 볼륨의 읽고 쓰기와 하나 또는 그 이상의 물리적 볼륨 (하드디 스크, RAID 시스템, 광자기 디스크, MD (설명서 페이지 mdadd(8)참조), 루프 백 디바이스, (losetup(8) 참조)), 에서 볼륨 그룹(일종의 가상 디스크)을 생 성하고 하나 또는 그 이상의 논리적 볼륨(일종의 논리 파티션)을 볼륨 그룹들 안에서 생성하는데 필요한 모든 지원을 포함하고 있습니다.
# ======================================================== #: lynx-2.8.4-5.i386.rpm:1005 lynx-2.8.4-5.src.rpm
Lynx is a text-based Web browser. Lynx does not display any images,\n but it does support frames, tables, and most other HTML tags. One\n advantage Lynx has over graphical browsers is speed; Lynx starts and\n exits quickly and swiftly displays webpages.
Lynx 는 텍스트 기반의 브라우져로써 그림 파일들을 열지는 못하지만 프레임, 테이블 그리고 대부분의 다른 HTML 태그들을 지원 합니다. 그래픽 기반의 브 라우져들에 비교했을때 Lynx 의 강점은 속도입니다. Lynx 는 빠르게 실행되고 웹페이지를 빠르게 그려냅니다.
# ======================================================== #: m4-1.4.1-3.i386.rpm:1005 m4-1.4.1-3.src.rpm:1005
M4 is a GNU implementation of the traditional UNIX macro processor.\n M4 is useful for writing text files that can be logically parsed and\n is used by many programs as part of their build process. M4 has\n built-in functions for including files, running shell commands, doing\n arithmetic, etc. The autoconf program needs m4 for generating\n configure scripts, but not for running configure scripts.
M4 는 GNU 에서 구현한 전통적인 UNIX 의 매크로 처리기 입니다. M4 는 논리 적으로 해석할 수 있는 텍스트 파일을 만들때 유용하며 많은 프로그램들이 이 것을 빌드 프로세스에 사용합니다. M4 는 외부 파일을 불러 읽거나 쉘 명령어 수행, 산술 계산등 많은 기능들을 가지고 있습니다. M4 는 autoconf 프로그램 이 설정스크립트 (configure script)를 생성하는데 쓰입니다. (설정스크립트 를 실행하는데는 필요하지 않습니다.)
# ======================================================== #: macutils-2.0b3-15.i386.rpm:1005 macutils-2.0b3-15.src.rpm:1005
The macutils package includes a set of utilities for manipulating\n files that are commonly used by Macintosh machines. Macutils includes\n utilities like binhex, hexbin, macunpack, etc.
Macutils 패키지에는 매킨토시 컴퓨터에서 쓰이는 파일들을 조작하는데 쓰이 는 유틸러티 프로그램들이 들어 있습니다. Macutils 에는 binhex, hexbin, macunpack 등이 있습니다.
# ======================================================== #: magicdev-0.2.7-5.i386.rpm:1005 magicdev-0.2.7-5.src.rpm:1005
Magicdev is a daemon that runs within the GNOME environment and\n detects when a CD is removed or inserted. Magicdev handles running\n autorun programs on the CD, updating the File Manager, and playing\n audio CDs.
Magicdev 은 GNOME 환경에서 CD 가 삽입되거나 제거되는것을 검사하는 데몬 입니다. Magicdev 은 CD 에 들어 있는 autorun 프로그램을 실행시키거나 파일 관리자 업데이트, 오디오 CD 재생을 할 수 있습니다.
# ======================================================== #: mailcap-2.1.0-1.noarch.rpm:1005 mailcap-2.1.0-1.src.rpm:10
The mailcap file is used by various programs. They read the mailcap file\n to determine how non-text or multimedia material should be handled. It does\n this by associating a particular type of file with a particular program\n that a mail agent or other program can call to handle the file.
mailcap 파일은 여러 다른 프로그램들이 일반 텍스트 파일이 아닌 파일이나 멀티미디어 파일을 어떻게 처리해야 하는지 결정하는데 쓰입니다. mailcap 파 일은 단순히 특정 파일과 그 파일을 처리 할 수 있는 프로그램을 지정해주어 이메일 프로그램이나 다른 프로그램들이 어떤 프로그램으로 이 파일을 처리해 야 할 지 알게 해줍니다.
# ======================================================== #: mailman-2.0.5-2.i386.rpm:1005 mailman-2.0.5-2.src.rpm:1005
Mailman is software to help manage email discussion lists, much like\n Majordomo and Smartmail. Unlike most similar products, Mailman gives\n each mailing list a webpage, and allows users to subscribe,\n unsubscribe, etc. over the Web. Even the list manager can administer\n his or her list entirely from the Web. Mailman also integrates most\n things people want to do with mailing lists, including archiving, mail\n <-> news gateways, and so on.\n \n When the package has finished installing, you will need to:\n \n * Run /var/mailman/bin/mmsitepass\n to set the mailman administrator password.\n * Edit /var/mailman/Mailman/mm_cfg.py\n to customize mailman's configuration for your site.\n * Modify the sendmail configuration to ensure that it is running and\n accepting connections from the outside world (to ensure that it runs,\n set "DAEMON=yes" in /etc/sysconfig/sendmail, ensuring that it accepts\n connections from the outside world may require modifying\n /etc/mail/sendmail.mc and regenerating sendmail.cf), and\n * Add these lines:\n ScriptAlias /mailman/ /var/mailman/cgi-bin/\n Alias /pipermail/ /var/mailman/archives/public/\n <Directory /var/mailman/archives>\n Options +FollowSymlinks\n </Directory>\n to /etc/httpd/conf/httpd.conf to configure your Web server.\n \n Users upgrading from previous releases of this package may need to\n move their data or adjust the configuration files to point to the\n locations where their data is.
Mailman 은 Majordomo 나 Smartmail 처럼 메일링 리스트 관리를 도와주는 프 로그램입니다. 다른 비슷한 프로그램들과 달리 Mailman 은 각 메일링 리스트 의 웹페이지를 제공하여 사용자들이 여기서 가입, 탈퇴등을 할 수 있게 해줍 니다. 리스트 관리자도 웹페이지를 통해서 모든 관리 작업을 할 수 있습니다. 또한 mailman 에는 아카이브 만들기, mail <-> news 게이트웨이 등 대부분의 사람들이 메일링 리스트로 하고 싶어하는 작업들이 통합되어 있습니다. 패키지를 설치하신 후에는 다음의 작업을 실시 하셔야 합니다.
* /var/mailman/bin/mmsitepass 실행\n mailman 관리자 암호를 설정하는 일입니다.\n */var/mailman/Mailman/mm_cfg.py 파일 편집\n 웹사이트를 위해 mailman 의 설정을 변경\n * sendmail 이 실행 되며 외부로부터 접속을 허용하는지 확인 하기 위해\n sendmail 의 설정을 변경합니다. (/etc/sysconfig/sendmail 의 \n "DAEMON=yes" 를 확인하시고 외부로부터의 접속을 허용하기 위해서는\n /etc/mail/sendmail.mc 파일을 편집하고 sendmail.cf 파일을 재생성\n 하셔야 할것입니다.) * 웹서버를 위해서는 다음의 내용을 /etc/httpd/conf/httpd.conf 에 \n 더하십시요.\n ScriptAlias /mailman/ /var/mailman/cgi-bin/\n Alias /pipermail/ /var/mailman/archives/public/\n <Directory /var/mailman/archives>\n Options +FollowSymlinks\n </Directory>\n
이 패키지를 이전 버전에서 업그레이드 하시는 경우에는 가지고 계신 데이터 를 \n 설정파일에서 지정한 장소로 옮기거나 설정파일을 편집해서 기존의 데이터가 어디에 \n 있는지를 알려주어야 합니다.\n
# ======================================================== #: make-3.79.1-5.i386.rpm:1005 make-3.79.1-5.src.rpm:1005
A GNU tool for controlling the generation of executables and other\n non-source files of a program from the program's source files. Make\n allows users to build and install packages without any significant\n knowledge about the details of the build process. The details about\n how the program should be built are provided for make in the program's\n makefile.\n \n The GNU make tool should be installed on your system because it is\n commonly used to simplify the process of installing programs.
이 프로그램은 실행파일을 생성하거나 프로그램의 소스 파일에서 다른 파일을 생성하는데 쓰이는 GNU 툴 입니다. Make 은 유저들이 프로그램 빌드 프로세스 에 대한 자세한 지식이 없이도 패키지를 만들고 설치할 수 있게 해줍니다. 프 로그램이 어떻게 빌되 되어야 하는가에 대한 자세한 사항들은 그 프로그램의 makefile 에 정의 되어 있습니다. 이 GNU Make 툴은 프로그램의 설치를 간단하게 만들기 위해서 널리 쓰이기 때 문에 여러분의 시스템에 꼭 필요할 것입니다.
# ======================================================== #: man-1.5h1-15.i386.rpm:1005 man-1.5h1-15.src.rpm:1005
The man package includes three tools for finding information and/or\n documentation about your Linux system: man, apropos, and whatis. The\n man system formats and displays on-line manual pages about commands or\n functions on your system. Apropos searches the whatis database\n (containing short descriptions of system commands) for a string.\n Whatis searches its own database for a complete word.\n \n The man package should be installed on your system because it is the\n primary way to find documentation on a Linux system.
man 패키지에는 여러분의 리눅스 시스템에 대한 문서와 그에 대한 정보를 검 색하는man, apropos, whatis 의 세 가지 툴이 들어 있습니다. man 시스템은 명령어들에 대한 온라인 메뉴얼을 화면에 보여주고 apropos 는 시스템 명령에 대한 간단한 설명이 들어있는 whatis 데이터베이스를 검색해주고, whatis 는 데이터베이스에서 단어를 검색해 줍니다. man 패키지는 리눅스 시스템에서 설명서를 찾는 가장 기본적인 방법이기 때문 에 여러분의 시스템에 반드시 설치하시는게 좋습니다.
# ======================================================== #: mars-nwe-0.99pl19-11.i386.rpm:1005 mars-nwe-0.99pl19-11.src.rpm:1005
The mars_nwe (MARtin Stover's NetWare Emulator) package enables Linux\n to provide both file and print services for NetWare clients,\n similar to the services provided by a Novell NetWare file server. Mars_nwe\n allows the sharing of files between Linux machines and Novell NetWare\n clients, using NetWare's native IPX protocol suite.
Mars_nwe (MARtin Stover's NetWare Emulator) 는 Novell NetWare 파일 서버 처럼 리눅스에서 넷웨어 클라이언트들에게 파일 및 인쇄 서비스를 제공하는 패키지 입니다. Mars_nwe 는 넷웨어의 IPX 프로토콜을 이용하여 리눅스 머신들과 Novell NetWare 클라이언트들 간에 파일 공유를 가능하게 해줍니다.
# ======================================================== #: mc-4.5.51-18.i386.rpm:1005 mc-4.5.51-18.src.rpm:1005
Midnight Commander is a visual shell much like a file manager, only\n with many more features. It is a text mode application, but it also\n includes mouse support if you are running GPM. Midnight Commander's\n best features are its ability to FTP, view tar and zip files, and to\n poke into RPMs for specific files.
미드나잇 커맨더는 일반 파일 매니져들과 같은 쉘이지만 더 많은 기능들을 가 지고 있습니다. 이것은 텍스트 기반이지만 GPM 을 사용하신다면 마우스도 지 원됩니다. 미드나잇 커맨더는 FTP 지원, tar, zip, RPM 등 의 아카이브 파일 브라우징 등 뛰어난 기능들을 가지고 있습니다.
# ======================================================== #: memprof-0.4.0-1.i386.rpm:1005 memprof-0.4.0-1.src.rpm:1005 Memprof is a tool for profiling memory usage and detecting memory\n leaks. Memprof can be used with existing binaries without\n recompilation.
Memprof 는 메모리의 사용과 메모리누수 (memory leak)를 프로파일링 하는 툴 입니다. 이것은 기존의 바이너리 파일을 재컴파일 하지 않고도 사용할 수 있 습니다.
# ======================================================== #: mgetty-1.1.22-3.i386.rpm:1005 mgetty-1.1.22-3.src.rpm:1005
The mgetty package contains a "smart" getty which allows logins over a\n serial line (such as through a modem). If you are using a Class 2 or 2.0\n modem, mgetty can receive faxes. If you also need to send faxes,\n you need to install the sendfax program.\n \n If you plan to dial in to your system using a modem, you should\n install the mgetty package. If you want to send faxes using mgetty and\n your modem, you need to install the mgetty-sendfaxprogram. If you\n need a viewer for faxes, you also need to install the mgetty-viewfax\n package.
mgetty 패키지는 시리얼라인을 통한 로그인을 가능하게 해 주는 "smart" getty를 포함하고 있습니다. 여러분에 Class 2 나 2.0 모뎀을 사용하고 계신 다면 팩스의 송수신도 가능합니다. 다만 팩스송신에는 sendfax 프로그램이 필 요합니다. 모뎀으로 시스템에 로그인 하시려면 mgetty 패키지를 설치 하셔야 합니다. 또, 팩스 송신을 하시려면 mgetty-sendfax, 받은 팩스를 보시려면 mgetty-viewfax 를 설치 하십시요.
# ======================================================== #: mgetty-1.1.22-3.src.rpm:1005 mgetty-sendfax-1.1.22-3.i386.rpm:1005
Sendfax is a standalone backend program for sending fax files. The\n mgetty program (a getty replacement for handling logins over a serial\n line) plus sendfax will allow you to send faxes through a Class 2\n modem.\n \n If you want to send faxes over a Class 2 modem, you need to install\n the mgetty-sendfax and the mgetty packages.
Sendfax 는 팩스를 송신하는 독립된 백엔드 프로그램입니다. 여러분은 mgetty (getty 를 대체하는 프로그램) 프로그램과 sendfax 로 Class 2 모뎀을 이용, 팩스를 송신 할 수 있습니다. Class 2 모뎀으로 팩스를 보내시려면 mgetty-sendfax 와 mgetty 패키지를 설 치 하십시요.
# ======================================================== #: mgetty-1.1.22-3.src.rpm:1005 mgetty-viewfax-1.1.22-3.i386.rpm:1
Viewfax displays the fax files received using mgetty in an X11 window.\n Viewfax is capable of zooming in and out on the displayed fax.\n \n If you're installing the mgetty-viewfax package, you will also need to\n install mgetty.
Viewfax 는 X11 윈도우 상에서 mgetty 로 받은 팩스를 보여줍니다. Viewfax 에는 줌 기능이 있어 팩스파일을 확대 해서 보여줄 수 있습니다. mgetty-viewfax 를 설치 하시려면 mgetty 도 같이 설치 하셔야 합니다.
# ======================================================== #: mgetty-1.1.22-3.src.rpm:1005 mgetty-voice-1.1.22-3.i386.rpm:1005
The mgetty-voice package contains the vgetty system, which enables\n mgetty and your modem to support voice capabilities. In simple terms,\n vgetty lets your modem act as an answering machine. How well the\n system will work depends upon your modem, which may or may not be able\n to handle this kind of implementation.\n \n Install mgetty-voice along with mgetty if you would like to try having\n your modem act as an answering machine.
mgetty-voice 패키지는 vgetty 라는 모뎀과 mgetty 에서 음성 기능을 쓸 수 있게 해 주는 시스템이 들어 있습니다. 간단히 설명 하자면, vgetty 는 모뎀 을 자동응답 전화기 처럼 쓸 수 있게 만들어 주는 것입니다. 하지만 이것의 작동 여부는 여러분께서 가지고 계신 모뎀의 성능에 달려 있습니다. 모뎀을 자동응답 전화처럼 써보시려면 mgetty-voice 와 mgetty 패키지를 설 치 하십시요.
# ======================================================== #: mikmod-3.1.6-10.i386.rpm:1005 mikmod-3.1.6-10.src.rpm:1005
MikMod is a MOD music file player. MikMod uses the OSS /dev/dsp driver\n including all recent kernels for output, and will also write .wav\n files. Supported file formats include MOD, STM, S3M, MTM, XM, ULT, and\n IT. The player uses ncurses for console output. It supports\n transparent loading from gzip/pkzip/zoo archives and the loading and\n saving of playlists.
MikMod 는 MOD 음악 파일 재생기 입니다. MikMod 는 출력에 최신 커널을 포함 한 모든 OSS /dev/dsp 드라이버를 이용 합니다. (.wav 파일로 출력할 수도 있 습니다.) 지원되는 파일 포맷은 MOD, STM, S3M, MTM, XM, ULT, IT 등입니다. 이 재생기는 ncurses 로 콘솔상에 화면을 띄우고, gzip/pkzip/zoo 아카이브 에서 음악 추출과 플레이리스트를 지원 합니다.
# ======================================================== #: mingetty-0.9.4-14.i386.rpm:1005 mingetty-0.9.4-14.src.rpm:1005
The mingetty program is a lightweight, minimalist getty program for\n use only on virtual consoles. Mingetty is not suitable for serial\n lines (you should use the mgetty program in that case).
mingetty 프로그램은 가상 콘솔에 쓰는 가볍고 작은 getty 프로그램 입니다. 이것은 시리얼 라인을 통한 로그인에 쓸 수 없습니다. 이런 경우에는 mgetty 를 설치해서 쓰시기 바랍니다.
Jooil Lee Telephone: (07) 3365 4408 jooil.lee@its.uq.edu.au Information Technology Services The University of Queensland Brisbane Queensland 4072 AUSTRALIA
와 근무중에 몰래 하시는데도 빨리 하셨네요
처음에 스펙스포 파일이 2448 메시지가 이미 번역되었고, 298 메시지가 번역 되지 않은 상태였는데 현재는 2509개가 번역되었고 237개가 번역되지 않았습니다.
많이들 도와주셨는데도 아직 갈 길이 좀 머네요. 이번에 보내주신 것 20개를 더 올리면 217개가 남습니다. 시작한 후로 81개가 모인 거네요. :)
만일 10개씩 자르면 최소한 21분 정도의 도움이 필요하네요. 지금까지 보고만 계시다가 지금이 기회다 싶으신 분은 빨리 뛰어들어 주세요~ 하루에 10분께서 10개씩만 해주셔도 이틀이나 삼일이면 백퍼센트가 될 수 있 을 것 같아요... 만일 오늘처럼 조용한 날은..좀 천천히 될 수도 있구요
힘드신데도 함께 일할 수 있다는게 너무 즐겁구요 저도 무척 바쁘지만 조용한 리스트를 바라보는 것 보단 힘이 납니다.
하루에 10명이서 10개입니다! 앗싸
Jooil Lee wrote:
마음 같아선 더 많이 하고 싶은데 워낙 타자가 느리고.. 근무중에 몰래 하는 일이라... -_-;
여튼 오늘 할당량은 다 했는데...
요 며칠 사이에 십시일반으로 모은게 꽤 될것 같은데, 어떤가요? 아직 갈길이 먼가요?
# ======================================================== #: ltrace-0.3.10-5.i386.rpm:1005 ltrace-0.3.10-5.src.rpm:1005
Ltrace is a debugging program that runs a specified command until the\n command exits. While the command is executing, ltrace intercepts and\n records both the dynamic library calls called by the executed process\n and the signals received by the executed process. Ltrace can also\n intercept and print system calls executed by the process.
Ltrace 는 지정한 명령이 종료 할때까지 그 명령을 수행하는 디버깅 프로그램 입니다. 명령이 수행되는 동안 ltrace 는 실행되는 프로세스의 동적 라이브러 리 호출과 프로세스가 받는 시그널들을 잡아서 기록합니다. ltrace 는 또한 프로세스가 실행하는 인쇄 시스템 호출도 잡을수 있습니다.
# ======================================================== #: lv-4.49.4-1.i386.rpm:1005 lv-4.49.4-1.src.rpm:1005
The lv utility is a file viewer. Lv can decode and encode multilingual\n streams using many coding systems: ISO-8859, ISO-2022, EUC, SJIS,\n Big5, HZ, and Unicode. It recognizes multi-byte patterns as regular\n expressions and also provides multilingual grep. Additionally, lv can\n recognize ANSI escape sequences for text decoration.
lv 는 파일 뷰어 입니다. Lv 는 SO-8859, ISO-2022, EUC, SJIS, Big5, HZ, Unicode 등 여러 코딩 시스템을 이용해서 여러국적의 언어로 인코딩하거나 디 코딩 할 수 있으며 멀티바이트 문자로 이루어진 패턴으로된 정규표현식을 인 식할 수 있고 다국적 언어용 grep 을 제공합니다. 덧붙여, lv 는 문자 장식을 위한 ANSI 확장 문자열도 인식할 수 있습니다.
# ======================================================== #: lvm-1.0.3-3.i386.rpm:1005 lvm-1.0.3-3.src.rpm:1005
LVM includes all of the support for handling read/write operations on\n physical volumes (hard disks, RAID-Systems, magneto optical, etc.,\n multiple devices (MD), see mdadd(8) or even loop devices, see\n losetup(8)), creating volume groups (kind of virtual disks) from one\n or more physical volumes and creating one or more logical volumes\n (kind of logical partitions) in volume groups.
LVM 은 물리적 볼륨의 읽고 쓰기와 하나 또는 그 이상의 물리적 볼륨 (하드디 스크, RAID 시스템, 광자기 디스크, MD (설명서 페이지 mdadd(8)참조), 루프 백 디바이스, (losetup(8) 참조)), 에서 볼륨 그룹(일종의 가상 디스크)을 생 성하고 하나 또는 그 이상의 논리적 볼륨(일종의 논리 파티션)을 볼륨 그룹들 안에서 생성하는데 필요한 모든 지원을 포함하고 있습니다.
# ======================================================== #: lynx-2.8.4-5.i386.rpm:1005 lynx-2.8.4-5.src.rpm
Lynx is a text-based Web browser. Lynx does not display any images,\n but it does support frames, tables, and most other HTML tags. One\n advantage Lynx has over graphical browsers is speed; Lynx starts and\n exits quickly and swiftly displays webpages.
Lynx 는 텍스트 기반의 브라우져로써 그림 파일들을 열지는 못하지만 프레임, 테이블 그리고 대부분의 다른 HTML 태그들을 지원 합니다. 그래픽 기반의 브 라우져들에 비교했을때 Lynx 의 강점은 속도입니다. Lynx 는 빠르게 실행되고 웹페이지를 빠르게 그려냅니다.
# ======================================================== #: m4-1.4.1-3.i386.rpm:1005 m4-1.4.1-3.src.rpm:1005
M4 is a GNU implementation of the traditional UNIX macro processor.\n M4 is useful for writing text files that can be logically parsed and\n is used by many programs as part of their build process. M4 has\n built-in functions for including files, running shell commands, doing\n arithmetic, etc. The autoconf program needs m4 for generating\n configure scripts, but not for running configure scripts.
M4 는 GNU 에서 구현한 전통적인 UNIX 의 매크로 처리기 입니다. M4 는 논리 적으로 해석할 수 있는 텍스트 파일을 만들때 유용하며 많은 프로그램들이 이 것을 빌드 프로세스에 사용합니다. M4 는 외부 파일을 불러 읽거나 쉘 명령어 수행, 산술 계산등 많은 기능들을 가지고 있습니다. M4 는 autoconf 프로그램 이 설정스크립트 (configure script)를 생성하는데 쓰입니다. (설정스크립트 를 실행하는데는 필요하지 않습니다.)
# ======================================================== #: macutils-2.0b3-15.i386.rpm:1005 macutils-2.0b3-15.src.rpm:1005
The macutils package includes a set of utilities for manipulating\n files that are commonly used by Macintosh machines. Macutils includes\n utilities like binhex, hexbin, macunpack, etc.
Macutils 패키지에는 매킨토시 컴퓨터에서 쓰이는 파일들을 조작하는데 쓰이 는 유틸러티 프로그램들이 들어 있습니다. Macutils 에는 binhex, hexbin, macunpack 등이 있습니다.
# ======================================================== #: magicdev-0.2.7-5.i386.rpm:1005 magicdev-0.2.7-5.src.rpm:1005
Magicdev is a daemon that runs within the GNOME environment and\n detects when a CD is removed or inserted. Magicdev handles running\n autorun programs on the CD, updating the File Manager, and playing\n audio CDs.
Magicdev 은 GNOME 환경에서 CD 가 삽입되거나 제거되는것을 검사하는 데몬 입니다. Magicdev 은 CD 에 들어 있는 autorun 프로그램을 실행시키거나 파일 관리자 업데이트, 오디오 CD 재생을 할 수 있습니다.
# ======================================================== #: mailcap-2.1.0-1.noarch.rpm:1005 mailcap-2.1.0-1.src.rpm:10
The mailcap file is used by various programs. They read the mailcap file\n to determine how non-text or multimedia material should be handled. It does\n this by associating a particular type of file with a particular program\n that a mail agent or other program can call to handle the file.
mailcap 파일은 여러 다른 프로그램들이 일반 텍스트 파일이 아닌 파일이나 멀티미디어 파일을 어떻게 처리해야 하는지 결정하는데 쓰입니다. mailcap 파 일은 단순히 특정 파일과 그 파일을 처리 할 수 있는 프로그램을 지정해주어 이메일 프로그램이나 다른 프로그램들이 어떤 프로그램으로 이 파일을 처리해 야 할 지 알게 해줍니다.
# ======================================================== #: mailman-2.0.5-2.i386.rpm:1005 mailman-2.0.5-2.src.rpm:1005
Mailman is software to help manage email discussion lists, much like\n Majordomo and Smartmail. Unlike most similar products, Mailman gives\n each mailing list a webpage, and allows users to subscribe,\n unsubscribe, etc. over the Web. Even the list manager can administer\n his or her list entirely from the Web. Mailman also integrates most\n things people want to do with mailing lists, including archiving, mail\n <-> news gateways, and so on.\n \n When the package has finished installing, you will need to:\n \n
- Run /var/mailman/bin/mmsitepass\n
to set the mailman administrator password.\n
- Edit /var/mailman/Mailman/mm_cfg.py\n
to customize mailman's configuration for your site.\n
- Modify the sendmail configuration to ensure that it is running and\n
accepting connections from the outside world (to ensure that it runs,\n set "DAEMON=yes" in /etc/sysconfig/sendmail, ensuring that it accepts\n connections from the outside world may require modifying\n /etc/mail/sendmail.mc and regenerating sendmail.cf), and\n
- Add these lines:\n
ScriptAlias /mailman/ /var/mailman/cgi-bin/\n Alias /pipermail/ /var/mailman/archives/public/\n <Directory /var/mailman/archives>\n Options +FollowSymlinks\n </Directory>\n to /etc/httpd/conf/httpd.conf to configure your Web server.\n \n Users upgrading from previous releases of this package may need to\n move their data or adjust the configuration files to point to the\n locations where their data is.
Mailman 은 Majordomo 나 Smartmail 처럼 메일링 리스트 관리를 도와주는 프 로그램입니다. 다른 비슷한 프로그램들과 달리 Mailman 은 각 메일링 리스트 의 웹페이지를 제공하여 사용자들이 여기서 가입, 탈퇴등을 할 수 있게 해줍 니다. 리스트 관리자도 웹페이지를 통해서 모든 관리 작업을 할 수 있습니다. 또한 mailman 에는 아카이브 만들기, mail <-> news 게이트웨이 등 대부분의 사람들이 메일링 리스트로 하고 싶어하는 작업들이 통합되어 있습니다. 패키지를 설치하신 후에는 다음의 작업을 실시 하셔야 합니다.
- /var/mailman/bin/mmsitepass 실행\n
mailman 관리자 암호를 설정하는 일입니다.\n */var/mailman/Mailman/mm_cfg.py 파일 편집\n 웹사이트를 위해 mailman 의 설정을 변경\n
- sendmail 이 실행 되며 외부로부터 접속을 허용하는지 확인 하기 위해\n
sendmail 의 설정을 변경합니다. (/etc/sysconfig/sendmail 의 \n "DAEMON=yes" 를 확인하시고 외부로부터의 접속을 허용하기 위해서는\n /etc/mail/sendmail.mc 파일을 편집하고 sendmail.cf 파일을 재생성\n 하셔야 할것입니다.)
- 웹서버를 위해서는 다음의 내용을 /etc/httpd/conf/httpd.conf 에 \n
더하십시요.\n ScriptAlias /mailman/ /var/mailman/cgi-bin/\n Alias /pipermail/ /var/mailman/archives/public/\n <Directory /var/mailman/archives>\n Options +FollowSymlinks\n </Directory>\n
이 패키지를 이전 버전에서 업그레이드 하시는 경우에는 가지고 계신 데이터 를 \n 설정파일에서 지정한 장소로 옮기거나 설정파일을 편집해서 기존의 데이터가 어디에 \n 있는지를 알려주어야 합니다.\n
# ======================================================== #: make-3.79.1-5.i386.rpm:1005 make-3.79.1-5.src.rpm:1005
A GNU tool for controlling the generation of executables and other\n non-source files of a program from the program's source files. Make\n allows users to build and install packages without any significant\n knowledge about the details of the build process. The details about\n how the program should be built are provided for make in the program's\n makefile.\n \n The GNU make tool should be installed on your system because it is\n commonly used to simplify the process of installing programs.
이 프로그램은 실행파일을 생성하거나 프로그램의 소스 파일에서 다른 파일을 생성하는데 쓰이는 GNU 툴 입니다. Make 은 유저들이 프로그램 빌드 프로세스 에 대한 자세한 지식이 없이도 패키지를 만들고 설치할 수 있게 해줍니다. 프 로그램이 어떻게 빌되 되어야 하는가에 대한 자세한 사항들은 그 프로그램의 makefile 에 정의 되어 있습니다. 이 GNU Make 툴은 프로그램의 설치를 간단하게 만들기 위해서 널리 쓰이기 때 문에 여러분의 시스템에 꼭 필요할 것입니다.
# ======================================================== #: man-1.5h1-15.i386.rpm:1005 man-1.5h1-15.src.rpm:1005
The man package includes three tools for finding information and/or\n documentation about your Linux system: man, apropos, and whatis. The\n man system formats and displays on-line manual pages about commands or\n functions on your system. Apropos searches the whatis database\n (containing short descriptions of system commands) for a string.\n Whatis searches its own database for a complete word.\n \n The man package should be installed on your system because it is the\n primary way to find documentation on a Linux system.
man 패키지에는 여러분의 리눅스 시스템에 대한 문서와 그에 대한 정보를 검 색하는man, apropos, whatis 의 세 가지 툴이 들어 있습니다. man 시스템은 명령어들에 대한 온라인 메뉴얼을 화면에 보여주고 apropos 는 시스템 명령에 대한 간단한 설명이 들어있는 whatis 데이터베이스를 검색해주고, whatis 는 데이터베이스에서 단어를 검색해 줍니다. man 패키지는 리눅스 시스템에서 설명서를 찾는 가장 기본적인 방법이기 때문 에 여러분의 시스템에 반드시 설치하시는게 좋습니다.
# ======================================================== #: mars-nwe-0.99pl19-11.i386.rpm:1005 mars-nwe-0.99pl19-11.src.rpm:1005
The mars_nwe (MARtin Stover's NetWare Emulator) package enables Linux\n to provide both file and print services for NetWare clients,\n similar to the services provided by a Novell NetWare file server. Mars_nwe\n allows the sharing of files between Linux machines and Novell NetWare\n clients, using NetWare's native IPX protocol suite.
Mars_nwe (MARtin Stover's NetWare Emulator) 는 Novell NetWare 파일 서버 처럼 리눅스에서 넷웨어 클라이언트들에게 파일 및 인쇄 서비스를 제공하는 패키지 입니다. Mars_nwe 는 넷웨어의 IPX 프로토콜을 이용하여 리눅스 머신들과 Novell NetWare 클라이언트들 간에 파일 공유를 가능하게 해줍니다.
# ======================================================== #: mc-4.5.51-18.i386.rpm:1005 mc-4.5.51-18.src.rpm:1005
Midnight Commander is a visual shell much like a file manager, only\n with many more features. It is a text mode application, but it also\n includes mouse support if you are running GPM. Midnight Commander's\n best features are its ability to FTP, view tar and zip files, and to\n poke into RPMs for specific files.
미드나잇 커맨더는 일반 파일 매니져들과 같은 쉘이지만 더 많은 기능들을 가 지고 있습니다. 이것은 텍스트 기반이지만 GPM 을 사용하신다면 마우스도 지 원됩니다. 미드나잇 커맨더는 FTP 지원, tar, zip, RPM 등 의 아카이브 파일 브라우징 등 뛰어난 기능들을 가지고 있습니다.
# ======================================================== #: memprof-0.4.0-1.i386.rpm:1005 memprof-0.4.0-1.src.rpm:1005 Memprof is a tool for profiling memory usage and detecting memory\n leaks. Memprof can be used with existing binaries without\n recompilation.
Memprof 는 메모리의 사용과 메모리누수 (memory leak)를 프로파일링 하는 툴 입니다. 이것은 기존의 바이너리 파일을 재컴파일 하지 않고도 사용할 수 있 습니다.
# ======================================================== #: mgetty-1.1.22-3.i386.rpm:1005 mgetty-1.1.22-3.src.rpm:1005
The mgetty package contains a "smart" getty which allows logins over a\n serial line (such as through a modem). If you are using a Class 2 or 2.0\n modem, mgetty can receive faxes. If you also need to send faxes,\n you need to install the sendfax program.\n \n If you plan to dial in to your system using a modem, you should\n install the mgetty package. If you want to send faxes using mgetty and\n your modem, you need to install the mgetty-sendfaxprogram. If you\n need a viewer for faxes, you also need to install the mgetty-viewfax\n package.
mgetty 패키지는 시리얼라인을 통한 로그인을 가능하게 해 주는 "smart" getty를 포함하고 있습니다. 여러분에 Class 2 나 2.0 모뎀을 사용하고 계신 다면 팩스의 송수신도 가능합니다. 다만 팩스송신에는 sendfax 프로그램이 필 요합니다. 모뎀으로 시스템에 로그인 하시려면 mgetty 패키지를 설치 하셔야 합니다. 또, 팩스 송신을 하시려면 mgetty-sendfax, 받은 팩스를 보시려면 mgetty-viewfax 를 설치 하십시요.
# ======================================================== #: mgetty-1.1.22-3.src.rpm:1005 mgetty-sendfax-1.1.22-3.i386.rpm:1005
Sendfax is a standalone backend program for sending fax files. The\n mgetty program (a getty replacement for handling logins over a serial\n line) plus sendfax will allow you to send faxes through a Class 2\n modem.\n \n If you want to send faxes over a Class 2 modem, you need to install\n the mgetty-sendfax and the mgetty packages.
Sendfax 는 팩스를 송신하는 독립된 백엔드 프로그램입니다. 여러분은 mgetty (getty 를 대체하는 프로그램) 프로그램과 sendfax 로 Class 2 모뎀을 이용, 팩스를 송신 할 수 있습니다. Class 2 모뎀으로 팩스를 보내시려면 mgetty-sendfax 와 mgetty 패키지를 설 치 하십시요.
# ======================================================== #: mgetty-1.1.22-3.src.rpm:1005 mgetty-viewfax-1.1.22-3.i386.rpm:1
Viewfax displays the fax files received using mgetty in an X11 window.\n Viewfax is capable of zooming in and out on the displayed fax.\n \n If you're installing the mgetty-viewfax package, you will also need to\n install mgetty.
Viewfax 는 X11 윈도우 상에서 mgetty 로 받은 팩스를 보여줍니다. Viewfax 에는 줌 기능이 있어 팩스파일을 확대 해서 보여줄 수 있습니다. mgetty-viewfax 를 설치 하시려면 mgetty 도 같이 설치 하셔야 합니다.
# ======================================================== #: mgetty-1.1.22-3.src.rpm:1005 mgetty-voice-1.1.22-3.i386.rpm:1005
The mgetty-voice package contains the vgetty system, which enables\n mgetty and your modem to support voice capabilities. In simple terms,\n vgetty lets your modem act as an answering machine. How well the\n system will work depends upon your modem, which may or may not be able\n to handle this kind of implementation.\n \n Install mgetty-voice along with mgetty if you would like to try having\n your modem act as an answering machine.
mgetty-voice 패키지는 vgetty 라는 모뎀과 mgetty 에서 음성 기능을 쓸 수 있게 해 주는 시스템이 들어 있습니다. 간단히 설명 하자면, vgetty 는 모뎀 을 자동응답 전화기 처럼 쓸 수 있게 만들어 주는 것입니다. 하지만 이것의 작동 여부는 여러분께서 가지고 계신 모뎀의 성능에 달려 있습니다. 모뎀을 자동응답 전화처럼 써보시려면 mgetty-voice 와 mgetty 패키지를 설 치 하십시요.
# ======================================================== #: mikmod-3.1.6-10.i386.rpm:1005 mikmod-3.1.6-10.src.rpm:1005
MikMod is a MOD music file player. MikMod uses the OSS /dev/dsp driver\n including all recent kernels for output, and will also write .wav\n files. Supported file formats include MOD, STM, S3M, MTM, XM, ULT, and\n IT. The player uses ncurses for console output. It supports\n transparent loading from gzip/pkzip/zoo archives and the loading and\n saving of playlists.
MikMod 는 MOD 음악 파일 재생기 입니다. MikMod 는 출력에 최신 커널을 포함 한 모든 OSS /dev/dsp 드라이버를 이용 합니다. (.wav 파일로 출력할 수도 있 습니다.) 지원되는 파일 포맷은 MOD, STM, S3M, MTM, XM, ULT, IT 등입니다. 이 재생기는 ncurses 로 콘솔상에 화면을 띄우고, gzip/pkzip/zoo 아카이브 에서 음악 추출과 플레이리스트를 지원 합니다.
# ======================================================== #: mingetty-0.9.4-14.i386.rpm:1005 mingetty-0.9.4-14.src.rpm:1005
The mingetty program is a lightweight, minimalist getty program for\n use only on virtual consoles. Mingetty is not suitable for serial\n lines (you should use the mgetty program in that case).
mingetty 프로그램은 가상 콘솔에 쓰는 가볍고 작은 getty 프로그램 입니다. 이것은 시리얼 라인을 통한 로그인에 쓸 수 없습니다. 이런 경우에는 mgetty 를 설치해서 쓰시기 바랍니다.
Jooil Lee Telephone: (07) 3365 4408 jooil.lee@its.uq.edu.au Information Technology Services The University of Queensland Brisbane Queensland 4072 AUSTRALIA
-- Fedora-trans-ko mailing list Fedora-trans-ko@redhat.com http://www.redhat.com/mailman/listinfo/fedora-trans-ko
순식간에 81 개나 했군요. 이렇게 따지면 217 개 정도는 금방 할것 같네요. 이번엔 한 30 개 쯤 보내 주세요. 금방 할 수 있을지는 모르지만요.
그리고... 무슨일이지 제가 보내는 이메일은 몇 시간씩 딜레이가 되서 앞으로는 gmail 어카운트로 받아 보려고 새로 subscribe 했습니다. 승인 부탁드립니다.
CVS 안되는 문제는 Sarah 한테 물어 보라고 그러셨던가요? CVS 안되서 Michelle 이 이메일로 접수 받아서 대신 올리고 있다고 말해도 됩니까?
Michelle Jiyeen Kim wrote:
와 근무중에 몰래 하시는데도 빨리 하셨네요
처음에 스펙스포 파일이 2448 메시지가 이미 번역되었고, 298 메시지가 번역 되지 않은 상태였는데 현재는 2509개가 번역되었고 237개가 번역되지 않았습니다.
많이들 도와주셨는데도 아직 갈 길이 좀 머네요. 이번에 보내주신 것 20개를 더 올리면 217개가 남습니다. 시작한 후로 81개가 모인 거네요. :)
만일 10개씩 자르면 최소한 21분 정도의 도움이 필요하네요. 지금까지 보고만 계시다가 지금이 기회다 싶으신 분은 빨리 뛰어들어 주세요~ 하루에 10분께서 10개씩만 해주셔도 이틀이나 삼일이면 백퍼센트가 될 수 있 을 것 같아요... 만일 오늘처럼 조용한 날은..좀 천천히 될 수도 있구요
힘드신데도 함께 일할 수 있다는게 너무 즐겁구요 저도 무척 바쁘지만 조용한 리스트를 바라보는 것 보단 힘이 납니다.
하루에 10명이서 10개입니다! 앗싸
Jooil Lee wrote:
마음 같아선 더 많이 하고 싶은데 워낙 타자가 느리고.. 근무중에 몰래 하는 일이라... -_-;
여튼 오늘 할당량은 다 했는데...
요 며칠 사이에 십시일반으로 모은게 꽤 될것 같은데, 어떤가요? 아직 갈길이 먼가요?
# ======================================================== #: ltrace-0.3.10-5.i386.rpm:1005 ltrace-0.3.10-5.src.rpm:1005
Ltrace is a debugging program that runs a specified command until the\n command exits. While the command is executing, ltrace intercepts and\n records both the dynamic library calls called by the executed process\n and the signals received by the executed process. Ltrace can also\n intercept and print system calls executed by the process.
Ltrace 는 지정한 명령이 종료 할때까지 그 명령을 수행하는 디버깅 프로그램 입니다. 명령이 수행되는 동안 ltrace 는 실행되는 프로세스의 동적 라이브러 리 호출과 프로세스가 받는 시그널들을 잡아서 기록합니다. ltrace 는 또한 프로세스가 실행하는 인쇄 시스템 호출도 잡을수 있습니다.
# ======================================================== #: lv-4.49.4-1.i386.rpm:1005 lv-4.49.4-1.src.rpm:1005
The lv utility is a file viewer. Lv can decode and encode multilingual\n streams using many coding systems: ISO-8859, ISO-2022, EUC, SJIS,\n Big5, HZ, and Unicode. It recognizes multi-byte patterns as regular\n expressions and also provides multilingual grep. Additionally, lv can\n recognize ANSI escape sequences for text decoration.
lv 는 파일 뷰어 입니다. Lv 는 SO-8859, ISO-2022, EUC, SJIS, Big5, HZ, Unicode 등 여러 코딩 시스템을 이용해서 여러국적의 언어로 인코딩하거나 디 코딩 할 수 있으며 멀티바이트 문자로 이루어진 패턴으로된 정규표현식을 인 식할 수 있고 다국적 언어용 grep 을 제공합니다. 덧붙여, lv 는 문자 장식을 위한 ANSI 확장 문자열도 인식할 수 있습니다.
# ======================================================== #: lvm-1.0.3-3.i386.rpm:1005 lvm-1.0.3-3.src.rpm:1005
LVM includes all of the support for handling read/write operations on\n physical volumes (hard disks, RAID-Systems, magneto optical, etc.,\n multiple devices (MD), see mdadd(8) or even loop devices, see\n losetup(8)), creating volume groups (kind of virtual disks) from one\n or more physical volumes and creating one or more logical volumes\n (kind of logical partitions) in volume groups.
LVM 은 물리적 볼륨의 읽고 쓰기와 하나 또는 그 이상의 물리적 볼륨 (하드디 스크, RAID 시스템, 광자기 디스크, MD (설명서 페이지 mdadd(8)참조), 루프 백 디바이스, (losetup(8) 참조)), 에서 볼륨 그룹(일종의 가상 디스크)을 생 성하고 하나 또는 그 이상의 논리적 볼륨(일종의 논리 파티션)을 볼륨 그룹들 안에서 생성하는데 필요한 모든 지원을 포함하고 있습니다.
# ======================================================== #: lynx-2.8.4-5.i386.rpm:1005 lynx-2.8.4-5.src.rpm
Lynx is a text-based Web browser. Lynx does not display any images,\n but it does support frames, tables, and most other HTML tags. One\n advantage Lynx has over graphical browsers is speed; Lynx starts and\n exits quickly and swiftly displays webpages.
Lynx 는 텍스트 기반의 브라우져로써 그림 파일들을 열지는 못하지만 프레임, 테이블 그리고 대부분의 다른 HTML 태그들을 지원 합니다. 그래픽 기반의 브 라우져들에 비교했을때 Lynx 의 강점은 속도입니다. Lynx 는 빠르게 실행되고 웹페이지를 빠르게 그려냅니다.
# ======================================================== #: m4-1.4.1-3.i386.rpm:1005 m4-1.4.1-3.src.rpm:1005
M4 is a GNU implementation of the traditional UNIX macro processor.\n M4 is useful for writing text files that can be logically parsed and\n is used by many programs as part of their build process. M4 has\n built-in functions for including files, running shell commands, doing\n arithmetic, etc. The autoconf program needs m4 for generating\n configure scripts, but not for running configure scripts.
M4 는 GNU 에서 구현한 전통적인 UNIX 의 매크로 처리기 입니다. M4 는 논리 적으로 해석할 수 있는 텍스트 파일을 만들때 유용하며 많은 프로그램들이 이 것을 빌드 프로세스에 사용합니다. M4 는 외부 파일을 불러 읽거나 쉘 명령어 수행, 산술 계산등 많은 기능들을 가지고 있습니다. M4 는 autoconf 프로그램 이 설정스크립트 (configure script)를 생성하는데 쓰입니다. (설정스크립트 를 실행하는데는 필요하지 않습니다.)
# ======================================================== #: macutils-2.0b3-15.i386.rpm:1005 macutils-2.0b3-15.src.rpm:1005
The macutils package includes a set of utilities for manipulating\n files that are commonly used by Macintosh machines. Macutils includes\n utilities like binhex, hexbin, macunpack, etc.
Macutils 패키지에는 매킨토시 컴퓨터에서 쓰이는 파일들을 조작하는데 쓰이 는 유틸러티 프로그램들이 들어 있습니다. Macutils 에는 binhex, hexbin, macunpack 등이 있습니다.
# ======================================================== #: magicdev-0.2.7-5.i386.rpm:1005 magicdev-0.2.7-5.src.rpm:1005
Magicdev is a daemon that runs within the GNOME environment and\n detects when a CD is removed or inserted. Magicdev handles running\n autorun programs on the CD, updating the File Manager, and playing\n audio CDs.
Magicdev 은 GNOME 환경에서 CD 가 삽입되거나 제거되는것을 검사하는 데몬 입니다. Magicdev 은 CD 에 들어 있는 autorun 프로그램을 실행시키거나 파일 관리자 업데이트, 오디오 CD 재생을 할 수 있습니다.
# ======================================================== #: mailcap-2.1.0-1.noarch.rpm:1005 mailcap-2.1.0-1.src.rpm:10
The mailcap file is used by various programs. They read the mailcap file\n to determine how non-text or multimedia material should be handled. It does\n this by associating a particular type of file with a particular program\n that a mail agent or other program can call to handle the file.
mailcap 파일은 여러 다른 프로그램들이 일반 텍스트 파일이 아닌 파일이나 멀티미디어 파일을 어떻게 처리해야 하는지 결정하는데 쓰입니다. mailcap 파 일은 단순히 특정 파일과 그 파일을 처리 할 수 있는 프로그램을 지정해주어 이메일 프로그램이나 다른 프로그램들이 어떤 프로그램으로 이 파일을 처리해 야 할 지 알게 해줍니다.
# ======================================================== #: mailman-2.0.5-2.i386.rpm:1005 mailman-2.0.5-2.src.rpm:1005
Mailman is software to help manage email discussion lists, much like\n Majordomo and Smartmail. Unlike most similar products, Mailman gives\n each mailing list a webpage, and allows users to subscribe,\n unsubscribe, etc. over the Web. Even the list manager can administer\n his or her list entirely from the Web. Mailman also integrates most\n things people want to do with mailing lists, including archiving, mail\n <-> news gateways, and so on.\n \n When the package has finished installing, you will need to:\n \n
- Run /var/mailman/bin/mmsitepass\n
to set the mailman administrator password.\n
- Edit /var/mailman/Mailman/mm_cfg.py\n
to customize mailman's configuration for your site.\n
- Modify the sendmail configuration to ensure that it is running and\n
accepting connections from the outside world (to ensure that it runs,\n set "DAEMON=yes" in /etc/sysconfig/sendmail, ensuring that it accepts\n connections from the outside world may require modifying\n /etc/mail/sendmail.mc and regenerating sendmail.cf), and\n
- Add these lines:\n
ScriptAlias /mailman/ /var/mailman/cgi-bin/\n Alias /pipermail/ /var/mailman/archives/public/\n <Directory /var/mailman/archives>\n Options +FollowSymlinks\n </Directory>\n to /etc/httpd/conf/httpd.conf to configure your Web server.\n \n Users upgrading from previous releases of this package may need to\n move their data or adjust the configuration files to point to the\n locations where their data is.
Mailman 은 Majordomo 나 Smartmail 처럼 메일링 리스트 관리를 도와주는 프 로그램입니다. 다른 비슷한 프로그램들과 달리 Mailman 은 각 메일링 리스트 의 웹페이지를 제공하여 사용자들이 여기서 가입, 탈퇴등을 할 수 있게 해줍 니다. 리스트 관리자도 웹페이지를 통해서 모든 관리 작업을 할 수 있습니다. 또한 mailman 에는 아카이브 만들기, mail <-> news 게이트웨이 등 대부분의 사람들이 메일링 리스트로 하고 싶어하는 작업들이 통합되어 있습니다. 패키지를 설치하신 후에는 다음의 작업을 실시 하셔야 합니다.
- /var/mailman/bin/mmsitepass 실행\n
mailman 관리자 암호를 설정하는 일입니다.\n */var/mailman/Mailman/mm_cfg.py 파일 편집\n 웹사이트를 위해 mailman 의 설정을 변경\n
- sendmail 이 실행 되며 외부로부터 접속을 허용하는지 확인 하기 위해\n
sendmail 의 설정을 변경합니다. (/etc/sysconfig/sendmail 의 \n "DAEMON=yes" 를 확인하시고 외부로부터의 접속을 허용하기 위해서는\n /etc/mail/sendmail.mc 파일을 편집하고 sendmail.cf 파일을 재생성\n 하셔야 할것입니다.)
- 웹서버를 위해서는 다음의 내용을 /etc/httpd/conf/httpd.conf 에 \n
더하십시요.\n ScriptAlias /mailman/ /var/mailman/cgi-bin/\n Alias /pipermail/ /var/mailman/archives/public/\n <Directory /var/mailman/archives>\n Options +FollowSymlinks\n </Directory>\n
이 패키지를 이전 버전에서 업그레이드 하시는 경우에는 가지고 계신 데이터 를 \n 설정파일에서 지정한 장소로 옮기거나 설정파일을 편집해서 기존의 데이터가 어디에 \n 있는지를 알려주어야 합니다.\n
# ======================================================== #: make-3.79.1-5.i386.rpm:1005 make-3.79.1-5.src.rpm:1005
A GNU tool for controlling the generation of executables and other\n non-source files of a program from the program's source files. Make\n allows users to build and install packages without any significant\n knowledge about the details of the build process. The details about\n how the program should be built are provided for make in the program's\n makefile.\n \n The GNU make tool should be installed on your system because it is\n commonly used to simplify the process of installing programs.
이 프로그램은 실행파일을 생성하거나 프로그램의 소스 파일에서 다른 파일을 생성하는데 쓰이는 GNU 툴 입니다. Make 은 유저들이 프로그램 빌드 프로세스 에 대한 자세한 지식이 없이도 패키지를 만들고 설치할 수 있게 해줍니다. 프 로그램이 어떻게 빌되 되어야 하는가에 대한 자세한 사항들은 그 프로그램의 makefile 에 정의 되어 있습니다. 이 GNU Make 툴은 프로그램의 설치를 간단하게 만들기 위해서 널리 쓰이기 때 문에 여러분의 시스템에 꼭 필요할 것입니다.
# ======================================================== #: man-1.5h1-15.i386.rpm:1005 man-1.5h1-15.src.rpm:1005
The man package includes three tools for finding information and/or\n documentation about your Linux system: man, apropos, and whatis. The\n man system formats and displays on-line manual pages about commands or\n functions on your system. Apropos searches the whatis database\n (containing short descriptions of system commands) for a string.\n Whatis searches its own database for a complete word.\n \n The man package should be installed on your system because it is the\n primary way to find documentation on a Linux system.
man 패키지에는 여러분의 리눅스 시스템에 대한 문서와 그에 대한 정보를 검 색하는man, apropos, whatis 의 세 가지 툴이 들어 있습니다. man 시스템은 명령어들에 대한 온라인 메뉴얼을 화면에 보여주고 apropos 는 시스템 명령에 대한 간단한 설명이 들어있는 whatis 데이터베이스를 검색해주고, whatis 는 데이터베이스에서 단어를 검색해 줍니다. man 패키지는 리눅스 시스템에서 설명서를 찾는 가장 기본적인 방법이기 때문 에 여러분의 시스템에 반드시 설치하시는게 좋습니다.
# ======================================================== #: mars-nwe-0.99pl19-11.i386.rpm:1005 mars-nwe-0.99pl19-11.src.rpm:1005
The mars_nwe (MARtin Stover's NetWare Emulator) package enables Linux\n to provide both file and print services for NetWare clients,\n similar to the services provided by a Novell NetWare file server. Mars_nwe\n allows the sharing of files between Linux machines and Novell NetWare\n clients, using NetWare's native IPX protocol suite.
Mars_nwe (MARtin Stover's NetWare Emulator) 는 Novell NetWare 파일 서버 처럼 리눅스에서 넷웨어 클라이언트들에게 파일 및 인쇄 서비스를 제공하는 패키지 입니다. Mars_nwe 는 넷웨어의 IPX 프로토콜을 이용하여 리눅스 머신들과 Novell NetWare 클라이언트들 간에 파일 공유를 가능하게 해줍니다.
# ======================================================== #: mc-4.5.51-18.i386.rpm:1005 mc-4.5.51-18.src.rpm:1005
Midnight Commander is a visual shell much like a file manager, only\n with many more features. It is a text mode application, but it also\n includes mouse support if you are running GPM. Midnight Commander's\n best features are its ability to FTP, view tar and zip files, and to\n poke into RPMs for specific files.
미드나잇 커맨더는 일반 파일 매니져들과 같은 쉘이지만 더 많은 기능들을 가 지고 있습니다. 이것은 텍스트 기반이지만 GPM 을 사용하신다면 마우스도 지 원됩니다. 미드나잇 커맨더는 FTP 지원, tar, zip, RPM 등 의 아카이브 파일 브라우징 등 뛰어난 기능들을 가지고 있습니다.
# ======================================================== #: memprof-0.4.0-1.i386.rpm:1005 memprof-0.4.0-1.src.rpm:1005 Memprof is a tool for profiling memory usage and detecting memory\n leaks. Memprof can be used with existing binaries without\n recompilation.
Memprof 는 메모리의 사용과 메모리누수 (memory leak)를 프로파일링 하는 툴 입니다. 이것은 기존의 바이너리 파일을 재컴파일 하지 않고도 사용할 수 있 습니다.
# ======================================================== #: mgetty-1.1.22-3.i386.rpm:1005 mgetty-1.1.22-3.src.rpm:1005
The mgetty package contains a "smart" getty which allows logins over a\n serial line (such as through a modem). If you are using a Class 2 or 2.0\n modem, mgetty can receive faxes. If you also need to send faxes,\n you need to install the sendfax program.\n \n If you plan to dial in to your system using a modem, you should\n install the mgetty package. If you want to send faxes using mgetty and\n your modem, you need to install the mgetty-sendfaxprogram. If you\n need a viewer for faxes, you also need to install the mgetty-viewfax\n package.
mgetty 패키지는 시리얼라인을 통한 로그인을 가능하게 해 주는 "smart" getty를 포함하고 있습니다. 여러분에 Class 2 나 2.0 모뎀을 사용하고 계신 다면 팩스의 송수신도 가능합니다. 다만 팩스송신에는 sendfax 프로그램이 필 요합니다. 모뎀으로 시스템에 로그인 하시려면 mgetty 패키지를 설치 하셔야 합니다. 또, 팩스 송신을 하시려면 mgetty-sendfax, 받은 팩스를 보시려면 mgetty-viewfax 를 설치 하십시요.
# ======================================================== #: mgetty-1.1.22-3.src.rpm:1005 mgetty-sendfax-1.1.22-3.i386.rpm:1005
Sendfax is a standalone backend program for sending fax files. The\n mgetty program (a getty replacement for handling logins over a serial\n line) plus sendfax will allow you to send faxes through a Class 2\n modem.\n \n If you want to send faxes over a Class 2 modem, you need to install\n the mgetty-sendfax and the mgetty packages.
Sendfax 는 팩스를 송신하는 독립된 백엔드 프로그램입니다. 여러분은 mgetty (getty 를 대체하는 프로그램) 프로그램과 sendfax 로 Class 2 모뎀을 이용, 팩스를 송신 할 수 있습니다. Class 2 모뎀으로 팩스를 보내시려면 mgetty-sendfax 와 mgetty 패키지를 설 치 하십시요.
# ======================================================== #: mgetty-1.1.22-3.src.rpm:1005 mgetty-viewfax-1.1.22-3.i386.rpm:1
Viewfax displays the fax files received using mgetty in an X11 window.\n Viewfax is capable of zooming in and out on the displayed fax.\n \n If you're installing the mgetty-viewfax package, you will also need to\n install mgetty.
Viewfax 는 X11 윈도우 상에서 mgetty 로 받은 팩스를 보여줍니다. Viewfax 에는 줌 기능이 있어 팩스파일을 확대 해서 보여줄 수 있습니다. mgetty-viewfax 를 설치 하시려면 mgetty 도 같이 설치 하셔야 합니다.
# ======================================================== #: mgetty-1.1.22-3.src.rpm:1005 mgetty-voice-1.1.22-3.i386.rpm:1005
The mgetty-voice package contains the vgetty system, which enables\n mgetty and your modem to support voice capabilities. In simple terms,\n vgetty lets your modem act as an answering machine. How well the\n system will work depends upon your modem, which may or may not be able\n to handle this kind of implementation.\n \n Install mgetty-voice along with mgetty if you would like to try having\n your modem act as an answering machine.
mgetty-voice 패키지는 vgetty 라는 모뎀과 mgetty 에서 음성 기능을 쓸 수 있게 해 주는 시스템이 들어 있습니다. 간단히 설명 하자면, vgetty 는 모뎀 을 자동응답 전화기 처럼 쓸 수 있게 만들어 주는 것입니다. 하지만 이것의 작동 여부는 여러분께서 가지고 계신 모뎀의 성능에 달려 있습니다. 모뎀을 자동응답 전화처럼 써보시려면 mgetty-voice 와 mgetty 패키지를 설 치 하십시요.
# ======================================================== #: mikmod-3.1.6-10.i386.rpm:1005 mikmod-3.1.6-10.src.rpm:1005
MikMod is a MOD music file player. MikMod uses the OSS /dev/dsp driver\n including all recent kernels for output, and will also write .wav\n files. Supported file formats include MOD, STM, S3M, MTM, XM, ULT, and\n IT. The player uses ncurses for console output. It supports\n transparent loading from gzip/pkzip/zoo archives and the loading and\n saving of playlists.
MikMod 는 MOD 음악 파일 재생기 입니다. MikMod 는 출력에 최신 커널을 포함 한 모든 OSS /dev/dsp 드라이버를 이용 합니다. (.wav 파일로 출력할 수도 있 습니다.) 지원되는 파일 포맷은 MOD, STM, S3M, MTM, XM, ULT, IT 등입니다. 이 재생기는 ncurses 로 콘솔상에 화면을 띄우고, gzip/pkzip/zoo 아카이브 에서 음악 추출과 플레이리스트를 지원 합니다.
# ======================================================== #: mingetty-0.9.4-14.i386.rpm:1005 mingetty-0.9.4-14.src.rpm:1005
The mingetty program is a lightweight, minimalist getty program for\n use only on virtual consoles. Mingetty is not suitable for serial\n lines (you should use the mgetty program in that case).
mingetty 프로그램은 가상 콘솔에 쓰는 가볍고 작은 getty 프로그램 입니다. 이것은 시리얼 라인을 통한 로그인에 쓸 수 없습니다. 이런 경우에는 mgetty 를 설치해서 쓰시기 바랍니다.
Jooil Lee Telephone: (07) 3365 4408 jooil.lee@its.uq.edu.au Information Technology Services The University of Queensland Brisbane Queensland 4072 AUSTRALIA
-- Fedora-trans-ko mailing list Fedora-trans-ko@redhat.com http://www.redhat.com/mailman/listinfo/fedora-trans-ko
-- Fedora-trans-ko mailing list Fedora-trans-ko@redhat.com http://www.redhat.com/mailman/listinfo/fedora-trans-ko
Jooil Lee wrote:
순식간에 81 개나 했군요. 이렇게 따지면 217 개 정도는 금방 할것 같네요. 이번엔 한 30 개 쯤 보내 주세요. 금방 할 수 있을지는 모르지만요.
그리고... 무슨일이지 제가 보내는 이메일은 몇 시간씩 딜레이가 되서 앞으로는 gmail 어카운트로 받아 보려고 새로 subscribe 했습니다. 승인 부탁드립니다.
CVS 안되는 문제는 Sarah 한테 물어 보라고 그러셨던가요? CVS 안되서 Michelle 이 이메일로 접수 받아서 대신 올리고 있다고 말해도 됩니까?
와 30개나요 :) 선두주자이시네요
gmail로 가입하셨을때 페도라 웹사이트가 다운되어 있어서 승인하는데 시간이 조금 걸렸네요. 죄송. 이제 가입되셨으리라 믿습니다.
CVS 문제가 이주일님 키와 CVS 키가 일치하지 않아서 발생한 문제라면 sarah 한테 문의하셔도 똑같은 대답을 들으실텐데요. 아마도 이전 계정을 삭제하고 새로 등록하셔야 될거예요. 이외의 문제라면 저 한테 우선 어떤 오류가 나는지 알려주시면 제가 새라를 대신 닦달할 수 있지요 :)
우선 스펙스포는 여러명이 한번에 일하는 관계로 CVS를 통해서 하기엔 불가능 하고, 이메일로 통해서 끝내는 방법이 불가피하네요. 스펙스포 이후로는 CVS를 사용 하여 번역이 이루어질거구요.
오늘분 30개 준비되셨나요?
# ======================================================== #: mt-st-0.5b-10.i386.rpm:1005 mt-st-0.5b-10.src.rpm:1005 The mt-st package contains the mt and stinit tape drive management\n programs. Mt (for magnetic tape drives) can control rewinding,\n ejecting, skipping files and blocks, and more. The stinit program is\n used to initialize SCSI magnetic tape drives at system startup.
# ======================================================== #: mtools-3.9.7-3.i386.rpm:1005 mtools-3.9.7-3.src.rpm:1005 Mtools is a collection of utilities for accessing MS-DOS files.\n Mtools allow you to read, write, and move MS-DOS filesystem files\n (normally on MS-DOS floppy disks). Mtools supports Windows95 style\n long file names, OS/2 XDF disks, and 2m disks.
# ======================================================== #: mtr-0.42-7.i386.rpm:1005 mtr-0.42-7.src.rpm:1005 Mtr is a network diagnostic tool that combines ping and traceroute\n into one program. Mtr provides two interfaces: an ncurses interface,\n useful for using Mtr from a telnet session; and a GTK+ interface for X\n (provided in the mtr-gtk package).
# ======================================================== #: mtx-1.2.9-1.i386.rpm:1005 mtx-1.2.9-1.src.rpm:1005 The MTX program controls the robotic mechanism in autoloaders and tape\n libraries such as the HP SureStore DAT 40x6, Exabyte EZ-17, and\n Exabyte 220. This program is also reported to work with a variety of\n other tape libraries and autochangers from ADIC, Tandberg/Overland,\n Breece Hill, HP, and Seagate.\n \n If you have a backup tape device capable of handling more than one\n tape at a time, you should install MTX.
# ======================================================== #: musicbrainz-1.1.0-3.i386.rpm:1005 musicbrainz-1.1.0-3.src.rpm:1005
The MusicBrainz client library allows applications to make metadata lookups\n to a MusicBrainz server and generate signatures from WAV data and create CD\n index disk IDs from audio CD-ROMs.
# ======================================================== #: mutt-1.2.5i-5.i386.rpm:1005 mutt-1.2.5i-5.src.rpm:1005
Mutt is a text-mode mail user agent. Mutt supports color, threading,\n arbitrary key remapping, and a lot of customization.\n \n You should install mutt if you have used it in the past and you prefer\n it, or if you are new to mail programs and have not decided which one\n you are going to use.
# ======================================================== #: mysql-3.23.28-0.1.i386.rpm:1005 mysql-3.23.28-0.1.src.rpm:1005
MySQL is a multi-user, multi-threaded SQL database server. MySQL is a\n client/server implementation consisting of a server daemon (mysqld)\n and many different client programs and libraries. This package\n contains the MySQL client programs, the client shared library, and\n generic MySQL files.
# ======================================================== #: mysql-3.23.28-0.1.src.rpm:1005 mysql-server-3.23.28-0.1.i386.rpm:1005
MySQL is a true multi-user, multi-threaded SQL database server. MySQL\n is a client/server implementation that consists of a server daemon\n (mysqld) and many different client programs and libraries. This\n package contains the MySQL server and some accompanying files and\n directories.
# ======================================================== #: namazu-2.0.10-3.i386.rpm:1005 namazu-2.0.10-3.src.rpm:1005
Namazu is an easy-to-use, full-text search engine.\n It works as a CGI program for small or medium scale WWW\n search engines, as well as for personal use, like searching a \n local HDD.
# ======================================================== #: nasm-0.98-5.i386.rpm:1005 nasm-0.98-5.src.rpm:1005
NASM is the Netwide Assembler, a free portable assembler for the Intel\n 80x86 microprocessor series, using primarily the traditional Intel\n instruction mnemonics and syntax.
# ======================================================== #: nautilus-1.0.4-17.i386.rpm:1005 nautilus-1.0.4-17.src.rpm:1005
Nautilus integrates access to files, applications, media,\n Internet-based resources and the Web. Nautilus delivers a dynamic and\n rich user experience. Nautilus is a free software project developed\n under the GNU General Public License and is a core component of the\n GNOME desktop project.
# ======================================================== #: nc-1.10-10.i386.rpm:1005 nc-1.10-10.src.rpm:1005
The nc package contains Netcat (the program is actually nc), a simple\n utility for reading and writing data across network connections, using\n the TCP or UDP protocols. Netcat is intended to be a reliable back-end\n tool which can be used directly or driven by other programs and\n scripts. Netcat is also a feature-rich network debugging and\n exploration tool, since it can create many different connections and\n has many built-in capabilities.
# ======================================================== #: ncftp-3.0.2-1.i386.rpm:1005 ncftp-3.0.2-1.src.rpm:1005
Ncftp is an improved FTP client. Ncftp's improvements include support\n for command line editing, command histories, recursive gets, automatic\n anonymous logins, and more.
# ======================================================== #: ncompress-4.2.4-21.i386.rpm:1005 ncompress-4.2.4-21.src.rpm:1005
The ncompress package contains the compress and uncompress file\n compression and decompression utilities, which are compatible with the\n original UNIX compress utility (.Z file extensions). These utilities\n can not handle gzipped (.gz file extensions) files, but gzip can\n handle compressed files.\n \n Install ncompress if you need compression/decompression utilities\n which are compatible with the original UNIX compress utility.
# ======================================================== #: ncpfs-2.2.0.18-3.i386.rpm:1005 ncpfs-2.2.0.18-3.src.rpm:1005
Ncpfs is a filesystem which understands the Novell NetWare(TM) NCP\n protocol. Functionally, NCP is used for NetWare the way NFS is used in\n the TCP/IP world. For a Linux system to mount a NetWare filesystem, it\n needs a special mount program. The ncpfs package contains such a mount\n program plus other tools for configuring and using the ncpfs\n filesystem.\n \n Install the ncpfs package if you need it to use Novell NetWare files\n or services.
# ======================================================== #: ncurses-5.2-3.i386.rpm:1005 ncurses-5.2-3.src.rpm:1005
The curses library routines are a terminal-independent method of\n updating character screens with reasonable optimization. The ncurses\n (new curses) library is a freely distributable replacement for the\n discontinued 4.4BSD classic curses library.
# ======================================================== #: ncurses-5.2-3.src.rpm:1005 ncurses-devel-5.2-3.i386.rpm:1005
The header files and libraries for developing applications that use\n the ncurses CRT screen handling and optimization package.\n \n Install the ncurses-devel package if you want to develop applications\n which will use ncurses.
# ======================================================== #: ncurses4-5.0-2.i386.rpm:1005 ncurses4-5.0-2.src.rpm:1005
The curses library routines are a terminal-independent method of\n updating character screens with reasonable optimization. The ncurses\n (new curses) library is a freely distributable replacement for the\n discontinued 4.4BSD classic curses library.\n \n This package provides compatibility libraries for packages built\n against Red Hat Linux 6.2.
# ======================================================== #: nedit-5.1.1-9.i386.rpm:1005 nedit-5.1.1-9.src.rpm:1005
NEdit is a GUI text editor for the X Window System and Motif. NEdit is\n very easy to use, especially if you are familiar with the\n Macintosh(TM) or Microsoft(TM) Windows(TM) style of interface.
# ======================================================== #: net-snmp-5.0.1-4.i386.rpm:1005 net-snmp-5.0.1-4.src.rpm:1005
SNMP (Simple Network Management Protocol) is a protocol used for\n network management. The NET-SNMP project includes various SNMP tools:\n an extensible agent, an SNMP library, tools for requesting or setting\n information from SNMP agents, tools for generating and handling SNMP\n traps, a version of the netstat command which uses SNMP, and a Tk/Perl\n mib browser. This package contains the snmpd and snmptrapd daemons,\n documentation, etc.\n \n You will probably also want to install the net-snmp-utils package,\n which contains NET-SNMP utilities.
# ======================================================== #: net-snmp-devel-5.0.1-4.i386.rpm:1005 net-snmp-5.0.1-4.src.rpm:1005 The net-snmp-devel package contains the development libraries and\n header files for use with the NET-SNMP project's network management\n tools.\n \n Install the net-snmp-devel package if you would like to develop\n applications for use with the NET-SNMP project's network management\n tools. You'll also need to have the net-snmp and net-snmp-utils\n packages installed.
# ======================================================== #: net-snmp-utils-5.0.1-4.i386.rpm:1005 net-snmp-5.0.1-4.src.rp
The net-snmp-utils package contains various utilities for use with the\n NET-SNMP network management project.\n \n Install this package if you need utilities for managing your network\n using the SNMP protocol. You will also need to install the net-snmp\n package.
# ======================================================== #: netatalk-1.5.2-2.i386.rpm:1005 netatalk-1.5.2-2.src.rpm:1
This package enables Linux to talk to Macintosh computers via the\n AppleTalk networking protocol. It includes a daemon to allow Linux\n to act as a file server over EtherTalk or IP for Mac's.
# ======================================================== #: netdump-server-0.4.0-1.i386.rpm:1005 netdump-0.4.0-1.src.rpm:1005 The netdump server listens to the network for crashed kernels to\n contact it and then writes the oops log and a memory dump to\n /var/crash before asking the crashed machine to reboot.
# ======================================================== #: netpbm-9.8-2.i386.rpm:1005 netpbm-9.8-2.src.rpm:1005 The netpbm package contains a library of functions that support\n programs for handling various graphics file formats, including .pbm\n (portable bitmaps), .pgm (portable graymaps), .pnm (portable anymaps),\n .ppm (portable pixmaps), and others.
# ======================================================== #: netpbm-9.8-2.src.rpm:1005 netpbm-devel-9.8-2.i386
The netpbm-devel package contains the header files and static\n libraries, etc., for developing programs which can handle the various\n graphics file formats supported by the netpbm libraries.
======================================================== #: netpbm-9.8-2.src.rpm:1005 netpbm-progs-9.8-2.i386.rpm:1005
The netpbm-progs package contains a group of scripts for manipulating\n the graphics files in formats which are supported by the netpbm\n libraries. For example, netpbm-progs includes the rasttopnm script,\n which will convert a Sun rasterfile into a portable anymap.\n Netpbm-progs contains many other scripts for converting from one\n graphics file format to another.
# ======================================================== #: newt-0.50.18-1.i386.rpm:1005 newt-0.50.18-1.src.rpm:1005
Newt is a programming library for color text mode, widget-based user\n interfaces. Newt can be used to add stacked windows, entry widgets,\n checkboxes, radio buttons, labels, plain text fields, scrollbars,\n etc., to text mode user interfaces. This package also contains the\n shared library needed by programs built with newt, as well as a\n /usr/bin/dialog replacement called whiptail. Newt is based on the\n slang library.
# ======================================================== #: newt-0.50.18-1.src.rpm:1005 newt-devel-0.50.18-1.i386.rpm:1005
The newt-devel package contains the header files and libraries\n necessary for developing applications which use newt. Newt is a\n development library for text mode user interfaces. Newt is based on\n the slang library.
# ======================================================== #: nfs-utils-0.2.1-3.i386.rpm:1005 nfs-utils-0.2.1-3.src.rpm:1005 The nfs-utils package provides a daemon for the kernel NFS server and\n related tools, providing a much higher level of performance than the\n traditional Linux NFS server used by most users.\n \n This package also contains the showmount program. Showmount queries\n the mount daemon on a remote host for information about the NFS\n (Network File System) server on the remote host.
good luck!
trans-ko@lists.fedoraproject.org