[fedora-arm] SSD USB reset problems on Trimslice Pro

[Jeffrey Bastian]

I just got a Trimslice Pro (a friend wasn't using it), and I booted the
Fedora-Minimal-armhfp-20-Beta-TC2-sda image from an SD card and started
copying it to the internal SSD, and started getting errors on the serial
console:

[  864.153171] hub 1-0:1.0: cannot reset port 1 (err = -110)
[  864.382165] hub 1-0:1.0: cannot reset port 1 (err = -110)
[  864.611136] hub 1-0:1.0: cannot reset port 1 (err = -110)
[  864.616551] hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
...
[  923.473666] hub 1-0:1.0: cannot reset port 1 (err = -110)
[  923.702667] hub 1-0:1.0: cannot reset port 1 (err = -110)
[  923.931671] hub 1-0:1.0: cannot reset port 1 (err = -110)
[  924.574479] end_request: I/O error, dev sda, sector 240082
[  924.579969] Buffer I/O error on device sda1, logical block 119017
[  924.586047] Buffer I/O error on device sda1, logical block 119018
[  924.592124] Buffer I/O error on device sda1, logical block 119019
...
[ 1422.769804] Buffer I/O error on device sda1, logical block 135410
[ 1422.977894] EXT4-fs error (device sda1) in ext4_writepages:2540: IO
failure
[ 1423.163072] EXT4-fs error (device sda1): ext4_journal_check_start:56:
Detected aborted journal
[ 1423.171705] EXT4-fs (sda1): Remounting filesystem read-only
[ 1423.880858] EXT4-fs (sda1): ext4_writepages: jbd2_start: 1024 pages,
ino 31; err -30
[ 1433.542568] hub 1-0:1.0: cannot reset port 1 (err = -110)


This is using the 3.11.3-301.fc20.armv7hl kernel.

Searching the list archives, I see this has come up before, but there
doesn't seem to be a resolution:

https://lists.fedoraproject.org/pipermail/arm/2013-January/005114.html

Is this a kernel bug?  Or is the SSD starting to fail?

Thanks,
Jeff