[fedora-arm] Installing on a Hard Drive

Dennis Gilmore dennis at ausil.us
Tue Aug 19 20:24:26 UTC 2014


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Tue, 19 Aug 2014 15:57:01 -0400
Robert Moskowitz <rgm at htt-consult.com> wrote:

> 
> On 08/19/2014 03:08 PM, Dennis Gilmore wrote:
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA1
> >
> > On Tue, 19 Aug 2014 14:18:29 -0400
> > Robert Moskowitz <rgm at htt-consult.com> wrote:
> >
> >> I have a couple SATA drives I would like to test booting from.  Is
> >> there anything special I need to do, or can I 'just' attach with a
> >> USB/SATA adapter, run the install script (and the Cubieboard2 uboot
> >> dd command), and boot?
> >>
> >> Once I figure out the right power connector, I will be using some
> >> IDE drives on an IDE/SATA adapter as well.
> > really the best way to install to sata is to put u-boot on a sdcard
> > and boot the machine. you should have dhcp setup and configure pxe
> >   booting. then just do an install using anaconda.
> 
> OK.  all new to me.
> 
> Are you talking about the interactive network installation presented
> at:
> 
> https://fedoraproject.org/wiki/Architectures/ARM/Rawhide/Installation#Interactive_Network_Installation

yes, it is the preferred way to install Fedora on most systems 

> ??
> 
> Or something more specialized?
> 
> I can put the Cubieboard2 upboot on with:
> 
> dd if=/root/u-boot-sunxi/u-boot-sunxi-with-spl.bin of=/dev/sdb
> bs=1024 seek=8; sync
> 
> I have dhcp on my network, do I have to do anything on the SDcard to 
> support it?
> 
> For the anaconda install.  No video on the Cubieboard, I only have 
> serial console and ssh.
> 
> And PXE booting.  Are you saying that I am not installing to the
> drive, but booting all the time from the network?
> 
> Confused here...  :)

Please do not CC me on list email. 

I am talking about pxe booting the installer to install to disk.

you can do anaconda installs via vnc or serial.  the u-boot should just
work and defualt to pxe when it cant boot locally 

Dennis
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
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=5Wje
-----END PGP SIGNATURE-----


More information about the arm mailing list