[fedora-arm] cubietruck boots from sdcard, but f21 doesn't find mmcblk

[Cole Robinson]

On 02/25/2015 09:33 AM, Robert Moskowitz wrote:
> 
> On 02/25/2015 09:19 AM, Cole Robinson wrote:
>> Hey all,
>>
>> First time trying to setup my cubietruck/cubieboard3. I used
>> fedora-arm-installer[1] to fill in an 8GB sd card on my host machine, using
>> Fedora-Minimal-armhfp-21-5-sda.raw.xz.
> 
> Did you include
> 
> --target=Cubietruck
> 

Yes, I used --target=Cubietruck.

> on the installer script command?  (case insensitive, ir you read the script)
> 
> I have run this successfully on my Cubietruck and Cubieboard2 (I sent in a
> script change to support the C2, don't know if it has been rolled in).
> 
> Though I am now working with F22 Alpha to get video support.
> 
>> Pop it into my cubietruck, connect via serial console, start it up. Machine
>> passes uboot fine and boots the initrd, but eventually fails waiting for the
>> root mount point to show up, and falls back to dracut.
> 
> Mount the card on your host system and see that you get the __boot and __
> partitions.  Perhaps there is something wrong with your card install step. 
> After I build an SD card, I use gparted to increase the __ partition to max
> size for the card.  The I pull out the card from my host system. I would like
> to see this step automated in the script.
> 

The sdcard mounts fine on multiple machines using an sd-to-usb adapter, and
all partitions are accounted for. That's the only other way I have to test an
sdcard

Thanks,
Cole