[fedora-arm] Cubietruck failure with Fedora-Xfce-armhfp-23-3 (4.2.3-300.fc23.armv7hl)
Paul Whalen
pwhalen at redhat.com
Fri Oct 23 22:38:27 UTC 2015
----- Original Message -----
> Sunday/monday I will try another card. I have used this card many times
> in the past, using your script to lay down the image on the card.
I hit it as well, with a card that been used in the past.. tried another
and it worked fine..
Pasted below:
U-Boot SPL 2015.07 (Sep 12 2015 - 10:46:32)
DRAM: 2048 MiB
CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
U-Boot 2015.07 (Sep 12 2015 - 10:46:32 +0000) Allwinner Technology
CPU: Allwinner A20 (SUN7I)
I2C: ready
DRAM: 2 GiB
MMC: SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment
HDMI connected: Setting up a 1920x1080 hdmi console
In: serial
Out: vga
Err: vga
SCSI: SUNXI SCSI INIT
SATA link 0 timeout.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net: eth0: ethernet at 01c50000
starting USB...
USB0: USB EHCI 1.00
USB1: USB OHCI 1.0
USB2: USB EHCI 1.00
USB3: USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
scanning bus 1 for devices... unable to get device descriptor (error=-1)
1 USB Device(s) found
scanning bus 3 for devices... 1 USB Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
515 bytes read in 111 ms (3.9 KiB/s)
Ignoring unknown command: ui
Ignoring malformed menu command: autoboot
Ignoring malformed menu command: hidden
Ignoring unknown command: totaltimeout
Fedora-Xfce-armhfp-23-3 Boot Options.
1: Fedora-Xfce-armhfp-23-3 (4.2.3-300.fc23.armv7hl)
Enter choice: 1: Fedora-Xfce-armhfp-23-3 (4.2.3-300.fc23.armv7hl)
Retrieving file: /initramfs-4.2.3-300.fc23.armv7hl.img
43337044 bytes read in 2308 ms (17.9 MiB/s)
Retrieving file: /vmlinuz-4.2.3-300.fc23.armv7hl
5811776 bytes read in 391 ms (14.2 MiB/s)
append: console=ttyS0,115200 ro root=UUID=29ec3011-cc4c-4c7b-9ab8-2697716fd3c7
Retrieving file: /dtb-4.2.3-300.fc23.armv7hl/sun7i-a20-cubietruck.dtb
28110 bytes read in 2643 ms (9.8 KiB/s)
Kernel image @ 0x42000000 [ 0x000000 - 0x58ae40 ]
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
Loading Ramdisk to 4c6ab000, end 4efff554 ... OK
Loading Device Tree to 4c6a1000, end 4c6aadcd ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.3-300.fc23.armv7hl (mockbuild at arm04-builder03.arm.fedoraproject.org) (gcc version 5.1.1 20150618 (Red Hat 5.1.1-4) (GCC) ) #1 SMP Mon Oct 5 16:45:59 UTC 2015
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Cubietech Cubietruck
[ 0.000000] cma: Reserved 16 MiB at 0xbe800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
[ 0.000000] PERCPU: Embedded 12 pages/cpu @ee5c0000 s19840 r8192 d21120 u49152
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520553
[ 0.000000] Kernel command line: console=ttyS0,115200 ro root=UUID=29ec3011-cc4c-4c7b-9ab8-2697716fd3c7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1997348K/2089052K available (7232K kernel code, 1075K rwdata, 3288K rodata, 1036K init, 843K bss, 75320K reserved, 16384K cma-reserved, 1294428K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
..
>
> On 10/23/2015 01:54 PM, Paul Whalen wrote:
> >
> > ----- Original Message -----
> >> It has been a while since I tried any Fedora-23 builds what with a
> >> number of things going on. So seeing the go/nogo, I figured I better
> >> run a test and as you can see it failed (and I tried booting twice with
> >> this image and got the same results):
> > The image is working Ok here(tested on the Banana Pi Pro), I've found the
> > Cubietruck to be a little picky with mSD's and Ive seen the same error
> > when using anything but Silicon Power branded cards. YMMV..
> >
> > Thanks for testing Robert!
> >
> > Paul
> >
> >
> >>
> >> U-Boot SPL 2015.07 (Sep 12 2015 - 10:46:32)
> >> DRAM: 2048 MiB
> >> CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
> >>
> >>
> >> U-Boot 2015.07 (Sep 12 2015 - 10:46:32 +0000) Allwinner Technology
> >>
> >> CPU: Allwinner A20 (SUN7I)
> >> I2C: ready
> >> DRAM: 2 GiB
> >> MMC: SUNXI SD/MMC: 0
> >> *** Warning - bad CRC, using default environment
> >>
> >> Setting up a 1024x768 vga console
> >> In: serial
> >> Out: vga
> >> Err: vga
> >> SCSI: SUNXI SCSI INIT
> >> SATA link 0 timeout.
> >> AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
> >> flags: ncq stag pm led clo only pmp pio slum part ccc apst
> >> Net: eth0: ethernet at 01c50000
> >> starting USB...
> >> USB0: USB EHCI 1.00
> >> USB1: USB OHCI 1.0
> >> USB2: USB EHCI 1.00
> >> USB3: USB OHCI 1.0
> >> scanning bus 0 for devices... 1 USB Device(s) found
> >> scanning bus 2 for devices... 1 USB Device(s) found
> >> scanning bus 1 for devices... unable to get device descriptor (error=-1)
> >> 1 USB Device(s) found
> >> scanning bus 3 for devices... 1 USB Device(s) found
> >> Hit any key to stop autoboot: 0
> >> switch to partitions #0, OK
> >> mmc0 is current device
> >> Scanning mmc 0:1...
> >> Found /extlinux/extlinux.conf
> >> Retrieving file: /extlinux/extlinux.conf
> >> 494 bytes read in 127 ms (2.9 KiB/s)
> >> Ignoring unknown command: ui
> >> Ignoring malformed menu command: autoboot
> >> Ignoring malformed menu command: hidden
> >> Ignoring unknown command: totaltimeout
> >> Fedora-Xfce-armhfp-23-3 Boot Options.
> >> 1: Fedora-Xfce-armhfp-23-3 (4.2.3-300.fc23.armv7hl)
> >> Enter choice: 1: Fedora-Xfce-armhfp-23-3 (4.2.3-300.fc23.armv7hl)
> >> Retrieving file: /initramfs-4.2.3-300.fc23.armv7hl.img
> >> ** ext4fs_devread read error - block
> >> Skipping Fedora-Xfce-armhfp-23-3 (4.2.3-300.fc23.armv7hl) for failure
> >> retrieving
> >> initrd
> >> SCRIPT FAILED: continuing...
> >> ** Can't read partition table on 0:0 **
> >> ** Invalid partition 1 **
> >> ** Can't read partition table on 0:0 **
> >> ** Invalid partition 1 **
> >> ** Can't read partition table on 0:0 **
> >> ** Invalid partition 1 **
> >> ** Can't read partition table on 0:0 **
> >> ** Invalid partition 1 **
> >> ** Can't read partition table on 0:0 **
> >> ** Invalid partition 1 **
> >> scanning bus for devices...
> >> Found 0 device(s).
> >>
> >> SCSI device 0:
> >> Device 0: not available
> >>
> >> USB device 0: unknown device
> >> ethernet at 01c50000 Waiting for PHY auto negotiation to complete.... done
> >> Speed: 100, full duplex
> >> BOOTP broadcast 1
> >> BOOTP broadcast 2
> >> BOOTP broadcast 3
> >> BOOTP broadcast 4
> >> BOOTP broadcast 5
> >> BOOTP broadcast 6
> >> DHCP client bound to address 192.168.160.23 (5805 ms)
> >> *** Warning: no boot file name; using 'C0A8A017.img'
> >> Using ethernet at 01c50000 device
> >> TFTP from server 0.0.0.0; our IP address is 192.168.160.23; sending
> >> through gate
> >> way 192.168.160.1
> >> Filename 'C0A8A017.img'.
> >> Load address: 0x42000000
> >> Loading: T T T T T T T T T T
> >> Retry count exceeded; starting again
> >> missing environment variable: pxeuuid
> >> Retrieving file: /extlinux/pxelinux.cfg/01-02-c1-08-81-e2-d7
> >> Speed: 100, full duplex
> >> *** ERROR: `serverip' not set
> >> Retrieving file: /extlinux/pxelinux.cfg/C0A8A017
> >> Speed: 100, full duplex
> >> *** ERROR: `serverip' not set
> >> Retrieving file: /extlinux/pxelinux.cfg/C0A8A01
> >> Speed: 100, full duplex
> >> *** ERROR: `serverip' not set
> >> Retrieving file: /extlinux/pxelinux.cfg/C0A8A0
> >> Speed: 100, full duplex
> >> *** ERROR: `serverip' not set
> >> Retrieving file: /extlinux/pxelinux.cfg/C0A8A
> >> Speed: 100, full duplex
> >> *** ERROR: `serverip' not set
> >> Retrieving file: /extlinux/pxelinux.cfg/C0A8
> >> Speed: 100, full duplex
> >> *** ERROR: `serverip' not set
> >> Retrieving file: /extlinux/pxelinux.cfg/C0A
> >> Speed: 100, full duplex
> >> *** ERROR: `serverip' not set
> >> Retrieving file: /extlinux/pxelinux.cfg/C0
> >> Speed: 100, full duplex
> >> *** ERROR: `serverip' not set
> >> Retrieving file: /extlinux/pxelinux.cfg/C
> >> Speed: 100, full duplex
> >> *** ERROR: `serverip' not set
> >> Retrieving file: /extlinux/pxelinux.cfg/default-arm-sunxi
> >> Speed: 100, full duplex
> >> *** ERROR: `serverip' not set
> >> Retrieving file: /extlinux/pxelinux.cfg/default-arm
> >> Speed: 100, full duplex
> >> *** ERROR: `serverip' not set
> >> Retrieving file: /extlinux/pxelinux.cfg/default
> >> Speed: 100, full duplex
> >> *** ERROR: `serverip' not set
> >> Config file not found
> >> Speed: 100, full duplex
> >> BOOTP broadcast 1
> >> DHCP client bound to address 192.168.160.23 (11 ms)
> >> Using ethernet at 01c50000 device
> >> TFTP from server 0.0.0.0; our IP address is 192.168.160.23; sending
> >> through gate
> >> way 192.168.160.1
> >> Filename 'boot.scr.uimg'.
> >> Load address: 0x43100000
> >> Loading: T T T T T T T T T T
> >> Retry count exceeded; starting again
> >> sunxi#
> >>
> >> _______________________________________________
> >> arm mailing list
> >> arm at lists.fedoraproject.org
> >> https://admin.fedoraproject.org/mailman/listinfo/arm
>
>
More information about the arm
mailing list